MICROMOT
System
Bits and cutters for MICROMOT drills and mills of industrial quality.
18
l 1
l 2
d 1
NO 28 874
HSS twist drill set to DIN 338.
One each of 0.3 – 0.5 – 0.8 – 1.0 –
1.2 – 1.5 – 2.0 – 2.5 – 3.0 – 3.2mm
diameter.
2,5 6,07,0 5,0 6,02,5 5,0
7,0
13
9,0
8,0
3
1
3,0
22
1,8
38
1,8
Drills
Grinding bits
Milling bits
Cutting discs
5 x 5 x 5 x 5 x
0,5
2,5 7,0 6,0 5,0 2,5 6,0 7,0 5,0
8,0 9,0 13
13
3,0
0,8 1,0 1,2 1,6 2,1
644 44 44 44 44 4468 810 10
10 x 5 x
50 x
5,05,0
6,0 6,0 4,010,0
3,0
1,8 22 22
1,8
1,8 22
1,8 38
8,0
NO 28 864 NO 28 852 NO 28 854 NO 28 856 NO 28 858 NO 28 862
HSS drill bits
Purpose-made, selected, tungsten vanadium steel with high concentricity. Manufactured from a one-piece blank. High hardness for
optimum life expectancy. For drilling metal, non-ferrous metals, plastic, PC cards and wood. Work speeds: hard materials approx.
3,000rpm, soft materials approx. 8 000rpm. All shanks 2.35mm.
NO 28 774 NO 28 778 NO 28 776 NO 28 772 NO 28 770 NO 28 780
Carborundum grinding bits
High quality bits and sets of quality base materials of consistent hardness. Various shapes for widest possible range of applications. For working especially hard materials such as
as well as hard metal alloys. Accurately dimensioned shafts of 2.35 or 3.0mm ensure maximum concentricity.
NO 28 722 NO 28 727 NO 28 725 NO 28 724 NO 28 723 NO 28 726 NO 28 720
Tungsten vanadium milling bits
Selected tungsten vanadium steel. Purpose made of stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life
hard and soft woods, NF and precious metals, as well as plastics and plaster of paris. Ideal for milling, routing, shaping, profiling and slotting.
NO 28 810 NO 28 812 NO 28 820
Corundum discs
Discs made of a special compound of diameter 22 or 38 x 0.7mm. Used to part alloys and metals, stainless steels,
and NF metals as well as wood and plastics. All arbors 2.35mm.
NO 28 808 NO 28 809
Aluminium Oxide with reinforcement
The cutting discs are available in 22 x 0.8 and 38 x 1.0mm. Near
ly
stock. Will cut alloyed, standard and stainless steels, NF metals,
Arbor shaft 2.35mm.
6,0
2,35 2,353,03,0 2,352,35 2,35
5,0
38
1,8
10 x 50 x
38
1,8
