Bits and cutters for MICROMOT drills and mills of industrial quality. MICROMOT DrillsSystem 0,8 0,5 d1 6 44 6 1,0 44 8 1,2 44 8 1,6 44 10 2,1 44 10 44 l1 l2 NO 28 874 NO 28 864 NO 28 852 NO 28 854 NO 28 856 NO 28 858 NO 28 862 HSS twist drill set to DIN 338. One each of 0.3 - 0.5 - 0.8 - 1.0 - 1.2 - 1.5 - 2.0 - 2.5 - 3.0 - 3.2mm diameter. HSS drill bits Purpose-made, selected, tungsten vanadium steel with high concentricity. Manufactured from a one-piece blank. High hardness for optimum life expectancy. For drilling metal, non-ferrous metals, plastic, PC cards and wood. Work speeds: hard materials approx. 3,000rpm, soft materials approx. 8 000rpm. All shanks 2.35mm. Grinding bits 7,0 7,0 2,5 2,5 6,0 5,0 2,5 6,0 7,0 7,0 5,0 5,0 9,0 9,0 8,0 8,0 13 13 113 3 5x 5x 5x NO 28 774 NO 28 778 3,0 3,0 5x NO 28 776 NO 28 772 NO 28 770 NO 28 780 Carborundum grinding bits High quality bits and sets of quality base materials of consistent hardness. Various shapes for widest possible range of applications. For working especially hard materials such as as well as hard metal alloys. Accurately dimensioned shafts of 2.35 or 3.0mm ensure maximum concentricity. Milling bits 5,0 3,0 6,0 10,0 6,0 4,0 5,0 5,0 8,0 6,0 3,0 3,0 NO 28 722 2,35 NO 28 727 2,35 NO 28 725 2,35 NO 28 724 NO 28 723 2,35 2,35 NO 28 726 NO 28 720 Tungsten vanadium milling bits Selected tungsten vanadium steel. Purpose made of stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life hard and soft woods, NF and precious metals, as well as plastics and plaster of paris. Ideal for milling, routing, shaping, profiling and slotting. Cutting discs 38 38 38 38 22 22 1,8 1,8 10 x NO 28 810 50 x NO 28 812 1,8 1,8 5x 10 x 50 x NO 28 808 NO 28 809 NO 28 820 Corundum discs Discs made of a special compound of diameter 22 or 38 x 0.7mm. Used to part alloys and metals, stainless steels, and NF metals as well as wood and plastics. All arbors 2.35mm. 18 22 22 1,8 1,8 1,8 Aluminium Oxide with reinforcement The cutting discs are available in 22 x 0.8 and 38 x 1.0mm. Nearly stock. Will cut alloyed, standard and stainless steels, NF metals, Arbor shaft 2.35mm.