WTS001_p50-68 6/14/07 10:46 AM Page 57 Precision Compression Clamp Systems PRECISION COMPRESSION MOUNTING CLAMP SYSTEMS Wakefield Engineering compression pack heat sinks and clamp systems provide electrical and industrial equipment manufacturers with complete system solutions for proper installation and heat dissipation for high-power compression pack semiconductor. All components for device mounting and cooling are available separately for all standard compression requirements from 800 lbs (362.9 kg) to 16,000 lbs (7,257.5 kg) force in both natural and forced convection applications. Clamp Assembly Series Maximum Clamping Force Force Range Maximum Diameter (Ref) Power Disc Device Crossbar Stud Centerline to Centerline Dimension 130 Series 139 Series 143 Series 144 Series 145 Series 146 Series 131/132/133 Series 800 lbs (362.9 kg) - 2,000 lbs (907.2 kg) 3,000 lbs (1,360.8 kg) and 5,000 lbs (2,268.0 kg) 1,000 lbs (453.6 kg) - 6,000 lbs (2,721.6 kg) 1,000 lbs (453.6 kg) - 6,000 lbs (2,721.6 kg) 2,000 lbs (907.2 kg) - 10,000 lbs (4,535.9 kg) 8,000 lbs (3,628.8 kg) - 16,000 lbs (7,257.5 kg) High-Performance Press Pack Heat Sinks 2.25 in. (57.2 mm) 3.50 in. (88.9 mm) 3.50 in. (88.9 mm) 4.00 in. (101.6 mm) 4.50 in. (114.3 mm) 5.25 in. (133.4 mm) 2.750 in. (69.9 mm) Ref 4.000 in. (101.6 mm) Ref 4.000 in. (101.6 mm) Ref 4.625 in. (117.5 mm) Ref 5.500 in. (139.7 mm) Ref 6.000 in. (152.4 mm) Ref These high-quality mounting clamp assemblies are the worldwide standard for mounting, compression, and clamping press-pack SCR, thyristor, rectifier, and other high power disc packaged devices utilized in power distribution equipment, industrial controls, transportation systems, and power supply and conversion systems. Clamp assemblies will accommodate devices with overall case diameters to 5.25 in. (133.4 mm) maximum. Vertical device mounting space available for assemblies is determined by selecting an appropriate series crossbar by length which, when a series spring assembly is se- 130 SERIES lected (based on maximum clamping force required), will provide the necessary vertical clearance space. For the 130 and 139 Series, this determination is made by subtracting the chosen spring assembly "Z" dimension (refer to dimensional tables) from the crossbar assembly "X" dimension minimum and maximum values, to calculate the available device mounting space clearance for the particular assembly combination. Spring assembly "Z" dimension is the dimension measured from the spring assembly device mounting surface to the spring assembly top surface. Some series have fixed dimensions for alpha characters. All spring assemblies are designed with a force indicator gauge. Compression Mounting Clamp Assemblies for Semiconductors to 2.25 in. (57.2mm) Diameter 130 SERIES CROSSBAR 800 lb - 2,000 lb (362.8 kg - 907.2 kg) MECHANICAL DIMENSIONS Crossbar Device Mounting, Surface to Spring Assembly Top Surface Dimension Model No. 130-A 130-B 130-C 130-D 130-E 130-F 130-G 130-H 130-J 130-K 130-L 130-M 130-N 130-P "X" Dimension Min. Max. In. (mm) 1.74 (44.2) 2.05 (52.1) 2.36 (59.9) 2.67 (67.8) 2.98 (75.7) 3.29 (83.6) 3.60 (91.4) 3.91 (99.3) 4.22 (107.2) 4.53(115.1) 4.34 (122.9) 5.15 (130.8) 5.46 (138.7) 5.77 (146.6) - Weight lbs. (grams) 2.12 (53.8) 2.43 (61.7) 2.74 (69.6) 3.05 (77.5) 3.36 (85.3) 3.67 (93.2) 3.98 (101.1) 4.29 (109.0) 4.60 (116.8) 4.91 (124.7) 5.22 (132.6) 5.53 (140.5) 5.84 (147.3) 6.15 (156.2) 0.4 (181.44) 0.418 (189.60) 0.427 (193.68) 0.437 (198.22) 0.447 (202.76) 0.461 (209.11) 0.476 (215.91) 0.486 (220.45) 0.497 (225.44) 0.51 (231.33) 0.52 (235.87) 0.534 (242.22) 0.544 (246.75) 0.559 (253.56) 130 SERIES SPRING ASSEMBLY Model No. 130-1 130-2 130-3 130-4 130-5 No. of Leaves 2 2 3 4 5 "Z"Dim. in. (mm) 0.90 (22.9) 0.50 (12.7) 0.61 (15.5) 0.72 (18.3) 0.83 (21.1) Max Force lb (kg) 2,000 (907.2) 800 (362.8) 1,200 (544.3) 1,600 (727.8) 2,000 (907.2) Weight lbs (gms) 0.331 (150.14) 0.19 (86.18) 0.219 (99.34) 0.333 (151.05) 0.408 (185.07) Dimensions: in. (mm) Notes: 1. Spring assemblies are stainless steel leaves with a force indicator gauge, except the lowest cost Type 130-1 spring assembly manufactured from automotive grade stainless steel. Order Guide: Order Crossbar and Spring Assembly separately by type number from table. Dimensions: in. (mm) lb. (kg) 57 WTS001_p50-68 6/14/07 10:46 AM Page 58 Precision Compression Clamp Systems PRECISION COMPRESSION MOUNTING CLAMP SYSTEMS Compression mounting clamp assemblies for semiconductors to 3.50 in. (88.9 mm) Diameter 139 SERIES 139 SERIES CROSSBAR 3,000 lb - 5,000 lb, (1,360.8 kg - 2,268.0 kg), Crossbar Device Mounting, Surface to Spring Assembly, Top Surface Dimension 139-3 SERIES CROSSBAR - 3,000 LB (1,360.8) 139-5 SERIES CROSSBAR - 5,000 LB (2,268.0) Model No. Min "X" Dimension 139-3A 139-3B 139-3C 139-3D 139-3E 139-3F 139-3G 139-3H 130-3J 139-3K 139-3L 139-3M 139-3N 139-3P 1.52 (38.6) 1.83 (46.5) 2.14 (54.4) 2.45 (62.2) 2.77 (70.4) 3.08 (78.2) 3.39 (86.1) 3.70 (94.0) 4.01 (101.9 4.33 (110.0) 4.64 (117.9) 4.95 (125.7) 5.26 (133.6) 5.57 (141.5) Max Weight lbs. (grams) Model No. Min 1.89 (48.0) 2.21 (56.1) 2.52 (64.0) 2.83 (71.9) 3.14 (79.8) 3.45 (87.6) 3.77 (95.8) 4.08 (103.6) 4.39 (111.5) 4.70 (119.4) 5.01 (127.3) 5.33 (135.4) 5.64 (143.3) 5.95 (151.1) 0.689 (312.52) 0.7 (317.51) 0.706 (320.24) 0.721 (327.04) 0.732 (332.03) 0.741(336.11) 0.762 (345.64) 0.773 (350.63) 0.784 (355.62) 0.79 (358.34) 0.793 (359.70) 0.796 (361.06) 0.832 (377.39) 0.838 (380.11) 139-5A 139-5B 139-5C 139-5D 139-5E 139-5F 139-5G 139-5H 139-5J 139-5K 139-5L 139-5M 139-5N 139-5P 1.52 (38.6) 1.83 (46.5) 2.14 (54.4) 2.45 (62.2) 2.77 (70.4) 3.08 (78.2) 3.39 (86.1) 3.70 (94.0) 4.33 (101.9) 4.33 (110.0) 4.64 (117.9) 4.95 (125.7) 5.26 (133.6) 5.57 (141.5) in. (mm) - - - - - - - - - - - - - - "X" Dimension Max in. (mm) - - - - - - - - - - - - - - 1.89 (48.0) 2.21 (56.1) 2.52 (64.0) 2.83 (71.9) 3.14 (79.8) 3.45 (87.6) 3.77 (95.8) 4.08 (103.6) 4.39 (111.5) 4.70 (119.4) 5.01 (127.3) 5.33 (135.4) 5.64 (143.3) 5.95 (151.1) Weight lbs. (grams) 0.94 (426.38) 0.96 (435.45) 0.98 (444.52) 1.01 (458.13) 1.02 (462.66) 1.033 (468.56) 1.053 (477.63) 1.074 (487.64) 1.064 (482.62) 1.075 (487.61) 1.088 (493.51) 1.102 (499.86) 1.11 (503.49) 1.171 (531.16) CROSSBAR HEIGHT AND WIDTH Series Number Height "A" Reference in. (mm) Width "B" Reference in. (mm) 0.72 (18.3) 1.02 (25.9) 0.95 (24.1) 0.83 (21.1) 139-3 139-5 139 SERIES SPRING ASSEMBLY Model Number Number of Leaves "Z" Dimension in. (mm) Maximum Force lb. (kg) 139-1 139-2 1 2 0.87(22.1) 1.25(31.8) 3,000 (1,360.8) 5,000 (2,268.0) MECHANICAL DIMENSIONS Dimensions: in. (mm) 58 Order Guide: Order Crossbar and Spring Assembly separately by type number from table. Dimensions: in. (mm) lb. (kg) WTS001_p50-68 6/14/07 10:46 AM Page 59 Precision Compression Clamp Systems PRECISION COMPRESSION MOUNTING CLAMP SYSTEMS Compression Mounting Clamp Assemblies for Semiconductors to 3.50 in (88.9 mm) Diameter 143 SERIES 143 SERIES CROSSBAR 2,000 lb - 6,000 lb (907.2 kg - 2,721.6 kg) MECHANICAL DIMENSIONS Crossbar Device Mounting, Surface to Spring Assembly, Top Surface Dimension Model No. "X" Dimension Min Overall Height "H" In. (mm) Max In. (mm) 143-A 143-B 143-C 143-D 143-E 143-F 143-G 143-H 143-J 143-K 143-L 1.30 (33.0) 1.86 (45.7) 2.30 (58.4) 2.80 (71.1) 3.30 (83.8) 3.80 (96.5) 4.30 (109.2) 4.80 (121.9) 5.30 (134.6) 5.80 (147.3) 6.30 (160.0) - - - - - - - - - - - 1.80 (45.7) 2.30 (58.4) 2.80 (71.1) 3.30 (83.8) 3.80 (96.5) 4.30 (109.2) 4.80 (121.9) 5.30 (134.6) 5.80 (147.3) 6.30 (160.0) 6.80 (172.7) 4.68 (118.9) 5.18 (131.6) 5.68 (144.3) 6.18 (157.0) 6.68 (169.7) 7.18 (182.4) 1.68 (195.1) 8.18 (207.8) 8.68 (220.5) 9.18 (233.2) 9.68 (245.9) Weight lbs. (grams) 1.100 (498.95) 1.125 (510.29) 1.150 (521.63) 1.175 (532.97) 1.200 (544.31) 1.225 (555.65) 1.250 (566.99) 1.275 (578.33) 1.300 (589.67) 1.325 (601.00) 1.350 (612.35) 143 SERIES SPRING ASSEMBLY Model Number Number of Leaves Max. Clamping Force lb. (kg) Weight lb. (grams) 143-2 2 6,000 (2,721.6) 0.813 (368.77) Order Guide: Order Crossbar and Spring Assembly separately by type number from table. Dimensions: in. (mm) lb. (kg) Compression Mounting Clamp Assemblies for Semiconductors to 4.00 in (101.6mm) Diameter 144 SERIES 144 SERIES CROSSBAR 1,000 lb - 6,000 lb (453.6 kg - 2,721.6 kg) Crossbar Device Mounting, Surface to Spring Assembly Top Surface Dimension Model No. Dimensions: in. (mm) "X" Dimension Min MECHANICAL DIMENSIONS Weight lbs (grams) Max In. (mm) 144-A 144-B 144-C 144-D 144-E 1.50 (38.1) 2.00 (50.8) 2.50 (63.5) 3.00 (76.2) 3.50 (88.9) - - - - - 2.00 (50.8) 2.50 (63.5) 3.00 (63.5) 3.50 (88.9) 4.00 (101.6) 1.231 (558.37) 1.262 (572.43) 1.285 (582.87) 1.310 (594.21) 1.352 (613.26) 144 SERIES SPRING ASSEMBLY Model No. Clamping Force Range lb (kg) Weight lbs (grams) 144-2 1,000 (453.6) - 6,000 (2,721) 1.772 (803.77) Order Guide: Order Crossbar and Spring Assembly separately by type number from table. Dimensions: in. (mm) lb. (kg) Dimensions: in. (mm) 59 WTS001_p50-68 6/14/07 10:46 AM Page 60 Precision Compression Clamp Systems PRECISION COMPRESSION MOUNTING CLAMP SYSTEMS 145 SERIES Compression Mounting Clamp Assemblies for Semiconductors to 4.50 in (114.3 mm) Diameter 145 SERIES CROSSBAR 2,000 lb - 10,000 lb (907.2 kg - 4,535.9 kg) Crossbar Device Mounting, Surface to Spring Assembly, Top Surface Dimension Model No. "X" Dimension Min Max In. (mm) MECHANICAL DIMENSIONS 145-A 145-B 145-C 145-D 145-E 145-F 1.75 (44.5) 2.50 (63.5) 3.25 (82.6) 4.00 (101.6) 4.75 (120.7) 5.50 (139.7) - - - - - - Overall Height "H" In. (mm) 2.50 (63.5) 3.25 (82.6) 4.00 (101.6) 4.75 (120.7) 5.50 (139.7) 6.25 (158.8) 6.00 (152.4) 6.75 (171.5) 7.50 (190.5) 8.25 (209.6) 9.00 (228.6) 9.75 (247.7) Weight lbs. (grams) 3.845 (1744.06) 3.987 (1808.47) 4.06 (1841.58) 4.187 (1899.19) 4.37 (1982.20) 4.459 (2022.57) 145 SERIES SPRING ASSEMBLY Model No. Clamping Force Range lb (kg) Weight lbs (grams) 145-2 2,000 (907.2) - 10,000 (4,535.9) 2.01 (911.72) Order Guide: Dimensions: Order Crossbar and Spring Assembly separately by type number from table. in. (mm) lb. (kg) Dimensions: in. (mm) 146 SERIES Compression Mounting Clamp Assemblies for Semiconductors to 5.25 in (133.5 mm) Diameter 146 SERIES CROSSBAR 8,000 lb -16,000 lb (3,628.7 kg - 7,257.4 kg) Crossbar Device Mounting, Surface to Spring Assembly, Top Surface Dimension Model No. "X" Dimension Min Max In. (mm) MECHANICAL DIMENSIONS 146-A 146-B 146-C 146-D 146-E 146-F 146-G 1.54 (39.1) 2.29 (58.2) 3.04 (77.2) 3.79 (96.3) 4.54 (115.3) 5.29 (134.4) 6.04 (153.4) - - - - - - - 2.29 (58.2) 3.04 (77.2) 3.79 (96.3) 4.54 (115.3) 5.29 (134.4) 6.04 (153.4) 6.79 (172.5) Overall Height "H" In. (mm) Weight lbs. (grams) 5.92 (150.4) 6.67 (169.4) 7.42 (188.5) 8.17 (207,5) 8.92 (226.6) 9.67 (245.6) 10.42 (264.7) 3.813 (1729.55) 3.938 (1786.25) 4.063 (1842.95) 4.188 (1899.64) 4.313 (1956.34) 4.438 (2013.04) 4.563 (2069.74) 146 SERIES SPRING ASSEMBLY Model Number Number of Leaves Clamping Force Range lb (kg) Maximum Force lb (grams) 146-2 2 8,000 (3,628.7) - 16,000 (7,257.5) 2,688 (1,219.26) Order Guide: Order Crossbar and Spring Assembly separately by type number from table. Dimensions: in. (mm) 60 Dimensions: in. (mm) lb. (kg) WTS001_p50-68 6/14/07 10:46 AM Page 61 Precision Compression Clamp Systems 132/133 SERIES HIGH-PERFORMANCE HEAT SINKS FOR COMPRESSION TYPE DEVICES 132/133 SERIES MULTIPLE ASSEMBLY CONFIGURATION Dimensions: in.(mm) Finish: B = Black Anodized G = Gold Iridite Material: Aluminum Alloy Standard P/N Black Gold Anodize(4, 5) Iridite 132-4.5B 132-10B 132-15.5B 132-5-B9 132-11-B9 133-4.5B 133-7.5B 133-10B 133-5-B9 133-7.5-B9 133-11-B9 132-4.5G 132-10G 132-15.5G 132-5-G9 132-11-G9 133-4.5G 133-7.5G 133-10G 133-5-G9 133-7.5-G9 133-11-G9 Width in. (mm) Nominal Dimensions: (1) Length "A" in. (mm) Height in. (mm) Clamp System Series(5) 5.000 (127.0) 5.000 (127.0) 5.000 (127.0) 5.000 (127.0) 5.000 (127.0) 7.000 (139.2) 7.000 (139.2) 7.000 (139.2) 7.000 (139.2) 7.000 (139.2) 7.000 (139.2) 4.500 (114.3) 10.000 (254.0) 15.500 (393.7) 5.000 (127.0) 11.000 (299.4) 4.500 (114.3) 7.500 (190.5) 10.000 (254.0) 5.000 (127.0) 7.500 (190.5) 11.000 (279.4) 2.250 (57.2) 2.250 (57.2) 2.250 (57.2) 2.250 (57.2) 2.250 (57.2) 3.125 (79.4) 3.125 (79.4) 3.125 (79.4) 3.125 (79.4) 3.125 (79.4) 3.125 (79.4) 130 130 130 139 139 130 130 130 139 139 139 Notes: 1. Nominal dimensions for one heat sink of this type. 2. Thermal performance values shown are per pair of heat sinks. 3. Natural convection performance at 50C heat sink rise above ambient. Thermal Performance at Typical Load (2) Natural Convection Convection (C/W) @ (3) (C/W) 500 LFM) 0.61 0.38 0.28 0.61 0.37 0.37 0.28 0.26 0.37 0.28 0.24 0.170 0.130 0.100 0.170 0.120 0.110 0.085 0.082 0.110 0.085 0.076 4. Black anodize finish [1.875 in. (47.6 mm) diameter spot face. Device mounting surface area free of finish]. 5. Predrilled heat sinks accept 130 and 139 Series clamp systems. 132 SERIES Type 132-4.5 132-10 132-15.5 133-4.5 133-7.5 133-10 132-5-9** 132-11-9** 133-5-9** 133-7.5-9** 133-11-9** Use with - 2 ea 132-4.5 3 ea 132-4.5 - - 2 ea 133-4.5 - 2 ea 132-5-9 - - 2 ea 133-5-9 A 2.25 2.25 - - 2.25 - 2.50 - - 2.50 B 5.50 5.50 5.50 6.00 6.00 C See Fig.132 - 5.50 See Fig.133 See Fig.133 - See Fig.132 - 11.00 See Fig. 133 See Fig. 133 - 10.0 15.5 10.0 11.00 ** -9 indicates heat sinks drilled for 139 clamp. 133 SERIES NATURAL AND FORCED CONVECTION CHARACTERISTICS NATURAL AND FORCED CONVECTION CHARACTERISTICS MECHANICAL DIMENSIONS (EXTRUSION PROFILE 3560-2) MECHANICAL DIMENSIONS (EXTRUSION PROFILE 3559-2) Series **132-4.5 **132-10 **132-15.5 **132-5-9 **132-11-9 D Series **133-4.5 **133-7.5 **133-10 **133-5-9 **133-7.5-9 **133-11-9 Dimensions: in. (mm) 61