Thermofit Molded Parts Specification Control Drawing 322A112 thru 158 Transition, 90 Side Breakout Part Number : Description : NOTES ; inches COATING (SEE NOTE 3) 18 1. All dimensions are in Y_ R 7 DIA. INJECTION PORT [millimeters] / [487] (gre 4) 2. Dimensions appearing in table f L | 4 are as follows: H mau. q J DIA HDA y => J DIA a As Supplied t [-_ t { b - After Unrestricted Recovery ~ HW 3. Coating is optional. As supplied dimensions appearin in table are oe <12 DIA VENT PORT for uncoated parts. When coating [5,05] (SEE NOTE 4) is added, entry diameters will be ~t reduced by .06 max. 4. Molding ports are optional. When 7 KW -c0 odifcation number is _.I keK DIA specified molding ports will be located as shown. On size 522A112 the vent port will be eliminated. AS SUPPLIED AFTER UNRESTRICTED RECOVERY TABLE OF DIMENSIONS PART H&J K P R $s T HW & WW) KW NUMBER Min Max Min Max 10% | 10% | +10% +10% 20% | 420% a b a b b b ) b b b +52 23 26 12 2.06 | 1.03 -76 -06 04 3220112 | i325 | sel | ies? | cso] | cs23] |(2e21 |aasl | * |oneai | coz] 322A123 | 1:96 49 26 12 3.28 | 1.64 1.07 42 10 04 [26,9] | [12,4] | [6.6] | [3.0] | [83,3] |[41.7] |[27,.2] |[10,7] | [254] |[1,02] 3o0a134 | 1:08 -50 -52 -23 4.24 | 2.12 1.52 -80 10 -06 [26,9] |[12,7] |[13,2] | [5,8] | [107.7] | [53,8] | [386] |[20,3] |[2,54] |[1,52] 322a148 | 2:12 1.00 52 223 7.11_ | 3.56 2.26 1.00, 18 06 [55,6] | [25.4] ][13.2] | [5.8] |[180,6] | [90,4] |[57.4] |[25.4] | [4.57] |[1,52] 302a158 | 212 1.00 1.06 49 8.75 | 4.38 3.06 1.50 138 10 [55,6] | [25,4] | [26,9] | [12.4] | [222.3] [111.3] |[77.7] |[38.1] | [4.57] | [254] TE Connectivity Raychem EN DRIVE Revision : $1 Part Number : 322A112 thru 158 MENLO PARK, CALIFORNIA 94025 soe sue . Date : 20APR11 Description : Transition, 90 Thermofit Molded Parts Specification Control Drawing Side Breakout 322A112 thru 158 Transition, 90 Side Breakout Part Number : Description : COMPATABILITY CHART MATERIAL DASH NO.| MATERIAL DESCRIPTION RT SPEC COATING SLASH NO. COATING S NO. COATING DESCRIPTION -3 Polyolefin, Semirigid RT-301 /42; /86 $-1017;5-1048 Adhesive -4 Polyolefin, Flexible RT-1304 /42; /86 $-1017;S-1048 Adhesive 5 Elastomer, Flexible RT-501 /42 S-1017 Adhesive -6 Silicone RT-602 N/A -12 FVITON, Flexible RT-13512 N/A 25 Elastomer, Fluid Resistant RT-1325 /42; [86 $-1017;S-1048 Adhesive -100 Polyolefin, Semiflexible RT-1323 /86; /180 S-1048; S-10350 Adhesive ZEROHAL! 4VITON is a Registered Trademark of Dupont [ ORDERING INFORMATION Base part number Material dash number (See Compatability Chart) Modification number (lf necessary, see front of scd binder lor a complete list) Adhesive slash number (lf necessary, see Compatability Chart) THIS DRAWING IS SUBJECT TO CHANGE WITHOUT NOTICE; CONSULT YOUR NEAREST FIELD REPRESENTATIVE FOR CURRENT REMSION TE Connectivity Raychem TE CONNECTIVITY 300 CONSTITUTION DRIVE MENLO PARK, CALIFORNIA 94025 322A1XX Xx XX /XXX Revision : S$] Date : 20APR11 IF THIS DOCUMENT IS PRINTED IT BECOMES UNCONTROLLED. REVISION. $22A112 thru 158 Transition, 90 Side Breakout CAD FILE MP00071 Part Number : Description :