NPN High Power Silicon Transistors 2N6674 & 2N6675 Features * Available in JAN, JANTX, and JANTXV per MIL-PRF-19500/537 * TO-3 (TO-204AA) Package Maximum Ratings Symbol 2N6674 2N6675 Units Collector - Emitter Voltage Ratings VCEO 300 400 Vdc Collector - Base Voltage VCBO 450 650 Vdc Collector - Base Voltage VCBX 450 650 Vdc Emitter - Base Voltage VEBO 7.0 Vdc Base Current IB 5.0 Adc Collector Current IC Total Power Dissipation @ TA = +25 C (1) @ TA = +25 C Operating & Storage Temperature Range PT 15 6.0(2) 175 Top, Tstg Adc 3.0(3) 175 -65 to +200 W W C Thermal Characteristics Characteristics Thermal Resistance, Junction-to-Case Symbol Maximum Units RJC 1.0 C/W 1) Derate linearly @ 1.0 mW/C for TA > +25C 2) Derate linearly @ 34.2 mW/C for TA > +25C 3) Derate linearly @ 17.1 mW/C for TA > +25C Electrical Characteristics OFF Characteristics Collector - Emitter Breakdown Voltage IC = 200 mAdc 2N6674 2N6675 Collector - Emitter Cutoff Current VCE = 450 Vdc, VBE = -1.5 Vdc VCE = 650 Vdc, VBE = -1.5 Vdc 2N6674 2N6675 Emitter - Base Cutoff Current VEB = 7.0 Vdc Collector - Base Cutoff Current VCB = 450 Vdc Revision Date: 9/8/2011 New Product 2N6674 Symbol Mimimum Maximum Units V(BR)CEO 300 400 --- Vdc ICEX --- 0.1 0.1 Adc IEBO --- 2.0 mAdc ICBO --- 1.0 mAdc 1 2N6674 & 2N6675 Electrical Characteristics -con't ON Characteristics (2) Forward Current Transfer Ratio IC = 1.0 Adc, VCE = 3.0 Vdc Symbol Minimum Maximum HFE 15 40 8 20 IC = 10.0 Adc, VCE = 2.0 Vdc Collector - Emitter Saturation Voltage IC = 10.0 Adc, IB = 2.0 Adc IC = 15.0 Adc, IB = 5.0 Adc Base - Emitter Saturation Voltage IC = 1.0 Adc, IB = 2.0 Vdc VCE(sat) Unit --- 1.0 --- 5.0 Vdc VBE(sat) --- 1.5 | hfe | 3.0 10 Cobo 150 500 pF 0.1 0.6 2.5 0.5 0.5 s s s s s Vdc DYNAMIC Characteristic Small-Signal Short-Circuit Forward Current Transfer Ratio IC = 0.5 Adc, VCE = 10 Vdc, f = 1.0 kHz Output Capacitance VCB = 10 Vdc, IE = 0, 100 kHz f 1.0 MHz Switching Characteristic Delay Time Rise Time Storage Time Fall Time Cross-Over Time See Figure 3 of MIL-PRF-19500/537 td tr ts tf tc SAFE OPERATING AREA DC Tests: TC = +25 C, 1 Cycle, t = 1.0 s (See Figure 4 of MIL-PRF-19500/537) Test 1: VCE = 11.7 Vdc, IC = 15 Adc VCE = 30 Vdc, IC = 5.9 Adc Test 2: TEST 3: TEST 4: TEST 5: VCE = 100 Vdc, IC = 0.25 Adc VCE = 25 Vdc, IC = 7.0 Adc VCE = 300 Vdc, IC = 20 mAdc VCE = 400 Vdc, IC = 10 mAdc 2N6674 2N6675 Clamped Switching TA = 25 C, VCC = 15 Vdc, Load condition B, RBB1 = 5 , RBB2 = 1.5 , V BB2 = 5 Vdc, L = 50 H, R of inductor = 0.05 , RL = R of inductor. (See Figure 6 of MIL-PRF-19500/537) Clamp Voltage = 350, lC = 10 Adc Clamp Voltage = 450, lC = 10 Adc 2N6674 2N6675 (2) Pulse Test: Pulse Width = 300 s, Duty Cycle 2.0%. 2 603-641-3800 * 888-641--SEMI (7364) * metelics-sales@aeroflex.com * www.aeroflex.com/metelics Revision Date: 8/5/2012 2N6674 & 2N6675 Outline Drawing Aeroflex / Metelics, Inc. 975 Stewart Drive, Sunnyvale, CA 94085 Tel: (408) 737-8181 Fax: (408) 733-7645 ISO 9001: 2008 certified companies 54 Grenier Field Road, Londonderry, NH 03053 Tel: (603) 641-3800 Fax: (603)-641-3500 Sales: 888-641-SEMI (7364) Hi-Rel Components 9 Hampshire Street, Lawrence, MA 01840 Tel: (603) 641-3800 Fax: (978) 683-3264 www.aeroflex.com/metelics-hirelcomponents www.aeroflex.com/metelics metelics-sales@aeroflex.com Aeroflex / Metelics, Inc. reserves the right to make changes to any products and services herein at any time without notice. Consult Aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. Aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or service from Aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of Aeroflex or of third parties. Copyright 2011 Aeroflex / Metelics. All rights reserved. Revision Date: 8/5/2012 Our passion for performance is defined by three attributes represented by these three icons: solution-minded, performance-driven and customer-focused.