83
-(40)0122AT
3 421
3dB
E
3.6
1.4MAX
(0.65)
(0.2)(0.2) 1.20.81.2
4
(1.2) 1.6 (1.2)
Soldering areas
Features
1. Small Size and Lightweight
4mm x 3.6 mm x 1.4 mm max height and weighting
only 0.1g.
2. Wide Range of Variations for Each Type
of Attenuator
Attenuation levels available in 1 dB steps from 0 to
10 dB, and 20 dB for a total of 12 types of
variations.
3. Automatic placement
Supplied in embossed packaging to allow
placement with automatic equipment.
Individual piece packaging is also available.
Product Specifications
Ratings
Frequency range
Characteristic impedance
Maximum input power
DC to 2.5GHz (Note)
50ø
1W
Operating temperature
Operating humidity
-10ç to +65ç
95% max.
Item
1.Vibration
2.Shock
3.
Temperature cycle
Characteristic requirement Conditions
No electrical discontinuity of 1µs or more.
No damage, cracks, or parts dislocation.
Frequency of 10 to 2000 Hz, overall amplitude of 1.5mm,
acceleration of 98m/s2, 2 hours in each of the 3 directions.
Acceleration of 490m/s2, sine half-wave waveform, 3 cycles in
each of the 3 axis.
Temperature : -55ç /+15ç to +35ç /+85ç /+15ç to +35ç
Time : 30
/
2 to 3
/
30
/
2 to 3 (Minutes)
5 cycles
Note: DC to 600MHz for AT-2220.
Component
Attenuation element
Material Finish
Metal film Tin-lead plated
The test method conforms to MIL-STD-202.
Materials
AX:Fixed attenuator
Series name :2200 Series
Attenuation
00-(0) : 0 dB (Through)
01 : 1dB
06 : 6dB
(40): RoHS Compliant
1
2
3
4
Ordering information
Dimensions
AT-2203 shown
SMT Stripline Mounting Fixed Attenuators
AT-2200 Series
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
AT-2200 SeriesSMT Stripline Mounting Fixed Attenuators
84
AT-2203(40) AT-2210(40)
Specifications
Typical data
Part number
Attenuation (dB)
DC~
1,000MHz
1,000~
2,000MHz
2,000~
2,500MHz DC~2,500MHz
V.S.W.R (Max) Characteristic
Impedance (ø)
Power
(W)
Mounting surface
temperature (ç Max.) at time
of maximum input power
Weight
(g)
AT-2200-(0)(40)
AT-2201(40)
AT-2202(40)
AT-2203(40)
AT-2204(40)
AT-2205(40)
AT-2206(40)
AT-2207(40)
AT-2208(40)
AT-2209(40)
AT-2210(40)
AT-2220(40)
0+0.3
0
1±0.3
2±0.3
3±0.3
4±0.3
5±0.3
6±0.3
7±0.3
8±0.3
9±0.3
10±0.3
0+0.5
0
1±0.5
2±0.5
3±0.5
4±0.5
5±0.5
6±0.5
7±0.5
8±0.5
9±0.5
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
50
50
50
50
50
50
50
50
50
50
50
50
1
1
1
1
1
1
1
1
1
1
1
1
+85
+85
+85
+85
+85
+85
+85
+85
+85
+85
+85
+85
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
10±0.5
20±1.5(DC to 600MHz) 1.2(DC to 600MHz)
10±0.7 1.2
1.2
1.2 1.25
1.25
1.25
Note: When ordering packaged on tape and reel, add (06) after the end of the part number. One reel = 1,000 pieces
1.75
2.00
2.25
3.00
3.25
3.50
3.75
4.00
4.25
0.0 0.5 1.0 1.5 2.0 2.5 3.0
2.50
2.75
0.0 0.5 1.0 1.5 2.0 2.5 3.0
1.50
1.45
1.40
1.25
1.20
1.15
1.10
1.05
1.00
1.35
1.30
0.0 0.5 1.0 1.5 2.0 2.5 3.0
1.50
1.45
1.40
1.25
1.20
1.15
1.10
1.05
1.00
1.35
1.30
0.0 0.5 1.0 1.5 2.0 2.5 3.0
8.75
9.00
9.25
10.00
10.25
10.50
10.75
11.00
11.25
9.50
9.75
ATTENUATION
ATTENUATION
Frequency(GHz)
VSWRVSWR
Frequency(GHz)
Frequency(GHz) Frequency(GHz)
(dB)
(dB)
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
85
AT-2200 SeriesSMT Stripline Mounting Fixed Attenuators
250
ç
30 sec. max.
90±30 sec.
Time(s)
230
180
50
150
0
200
100
10 sec. max.
BRecommended Solder temperature profile
BRecommended Mounting Example
The attenuators can be placed using reflow or manual soldering
Manual Soldering
Tip temperature: 350ç max. for 3 sec. max.
Note 1: Do not touch the ceramic portion with the soldering iron tip.
Note: This attenuator is intended for a one-time use. Do not re-solder or re-use.
Reflow Soldering (Temperature Profile Recommendations)
Mounting and Soldering Recommendations
AT-2200(40)Grounding Pattern
Ceramic Portion
πThe dotted line portion indicates the position of the pattern.
50øLine
Board
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009