CSD
www.vishay.com Vishay Dale Thin Film
Revision: 02-Feb-16 1Document Number: 60046
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Ceramic Sandwich, Dual-In-Line Thin Film Resistor,
Through Hole Network (Custom)
A dual-in-line monolithic ceramic package in a variety of
sizes and configurations. A rugged, low cost packaging
technique with 4 leads to 20 leads that allows higher
resistance integration than chip and wire ceramic packages.
FEATURES
• Gold-to-gold terminations. External leads are
attached directly to gold pads on the ceramic
substrate by thermo-compression bonding (no
internal solder)
• Monolithic construction
• Ceramic package with no cavity. 4 pins to
20 pins.
• Flexibility of lead variations to save PC board
space
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
TYPICAL PERFORMANCE
SCHEMATIC
Note
(1) Tantalum nitride film is custom
ABSOLUTE TRACKING
TCR 10 2
ABSOLUTE RATIO
TOL. 0.1 0.02
Available
Available
STANDARD ELECTRICAL SPECIFICATIONS
TEST SPECIFICATIONS CONDITIONS
Material Passivated nichrome Tantalum nitride (1) -
Pin/Lead Number 4 to 20 -
Resistance Range 100 to 5 M total -
TCR: Absolute ± 10 ppm/°C ± 25 ppm/°C to ± 100 ppm/°C -55 °C to +125 °C
TCR: Tracking ± 2 ppm/°C ± 5 ppm/°C -55 °C to +125 °C
Tolerance: Absolute ± 0.1 % to ± 1.0 % +25 °C
Tolerance: Ratio ± 0.01 % to ± 0.1 % +25 °C
Power Rating: Resistor 100 mW (per element (typical)) Maximum at +70 °C
Power Rating: Package 500 mW Maximum at +70 °C
Stability: Absolute 1000 ppm 2000 h at +70 °C
Stability: Ratio 300 ppm 2000 h at +70 °C
Voltage Coefficient 0.1 ppm/V -
Working Voltage 100 V -
Operating Temperature Range -55 °C to +125 °C -
Storage Temperature Range -55 °C to +125 °C -
Noise < - 30 dB -
Thermal EMF < 0.1 μV/°C -
Shelf Life Stability: Absolute R ± 0.01 % 1 year at +25 °C
Shelf Life Stability: Ratio R ± 0.002 % 1 year at +25 °C
Custom schematics available.
Please consult factory
CSD
www.vishay.com Vishay Dale Thin Film
Revision: 02-Feb-16 2Document Number: 60046
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS AND IMPRINTING in inches and millimeters
DIMENSION INCHES MILLIMETERS
A 0.260 max. 6.61
B 0.050 1.27
C 0.160 typical 4.06
D 0.080 2.03
E 0.125 3.18
F 0.125 min. 3.18
G 0.01 0.254
H 0.325 8.25
I 0.100 2.54
J 0.020 0.51
L (4 Pins) 0.220 5.59
L (6 Pins) 0.320 8.13
L (8 Pins) 0.420 10.67
L (10 Pins) 0.520 13.21
L (12 Pins) 0.620 15.75
L (14 Pins) 0.720 18.29
L (16 Pins) 0.820 20.83
L (18 Pins) 0.920 23.37
L (20 Pins) 1.020 25.91
MECHANICAL SPECIFICATIONS
Resistive Element Passivated nichrome or tantalum nitride
Substrate Material Alumina
Body Ceramic
Terminals Copper alloy
Plating Gold
Tin / Lead Option Sn63
Lead (Pb)-free Option Sn96.5, Ag3.0, Cu0.5
Tin / Lead and Lead (Pb)-free Finish Hot solder dip
ORDERING INFORMATION CHECK LIST
Special requirements should be identified in advance, but as a minimum, you should have the following information ready.
ELECTRICAL MECHANICAL
1. Resistors, by value and tolerance
2. Reference resistor(s) and matching of which resistors to which
reference resistors
3. Resistance by ratio
4. Absolute temperature coefficient of resistivity
5. Temperature tracking of subordinate resistors to reference
resistor(s)
6. Maximum operating voltage
7. Resistor power ratings
8. Operating temperature range
1. Maximum allowable seated height (from PC board to top of
network)
2. Special marking concerns
3. Schematic pin out of package
4. Specify if lead (Pb)-free
For additional assistance refer to Vishay Dale Thin Film’s guide to understanding Thin Film precision.
Resistor networks or application engineering.
All standard products may be ordered directly from Vishay Dale Thin Film.
B
E
D
J
A
C
L
F
G
I
Non-cumulative
H
▼
Part Number
Vishay Logo Date Code
XXXX XX
Pin 1
CSD
www.vishay.com Vishay Dale Thin Film
Revision: 02-Feb-16 3Document Number: 60046
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: CSD1xx-xxxUF
GLOBAL MODEL
(2 or 3 digits)
CUSTOM PART NUMBER
(7 or 9 digits) PACKAGING
CSD 1xx-xxx
or
1xx-xxx-x
UF = Tubed
BX = Boxed
Historical Part Number example: 1xx-xxx (for reference purposes only)
1xx-xxx
CUSTOM PART NUMBER
1xx - xxx-xUF
S1xx-xxxUFD
S D
C
C
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 01-Jan-2019 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
