max. 325 M 1:5 Kontaktubersicht: verpackt in Tray VPE: 36 St. 33 max. 138 11,2 14,6 L = lang / long M = mittel / middle S = kurz / short 13 contacts overview tray packaging packaging unit 36 pcs. A DETAIL A MASTAB 1 : 1 S 9,7 0,1 M Bestuckungsplan L contact layout ABC DEFG 3 -0,25 23,7 2 M S S S L L B C D E F G 11,7 15,7 22,3 2 A M Gehause / housing: PBTP grau 30% GF / PBTP gray 30 %GF Kontakte / contacts: Phosphor Bronze / phosphor bronce 0,2 2,25 6 10,3 21,8 14,3 6 x 3 = 18 3 Oberflachenbeschichtung / plating: Kontaktbereich / mating area: 2-3 m Ni 1,2 m Au Anschlussbereich / termination: 2-3 m Ni 1 m Sn matt 3 Lochbild fur Leiterplatte Board hole pattern 0,05 C D E F Anforderungsstufe 1 G class 1 1) 1) 0,6 0,05 Durchmesser des metallisierten Loches 1,5 3,5 0,6 0,05 Diameter of finished plated-through hole 1,5 2 15 +0,05 Schichtaufbau im metallisierten Loch siehe Zeichnung 114406 / 164062 Nr.1 Metal plating of planted-through hole see drawing 114406 / 164062 Nr.1 Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. B 1) 2 4x2= 6 A 3:1 Scale Tolerances Information: All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. ERmet Messerl. PM 7 pol RC ERmet Male PM 7 pin RC 100100420001 www.ERNI.com Index Date Class ERMPM I A3