134 KOA Speer Electronics, Inc. 199 Bolivar Drive Bradford, PA 16701 USA 814-362-5536 Fax: 814-362-8883 www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 11/14/17
SL1, SL2
surface mount molded current sense resistors
features
Surface mount type
Flameproof UL94V0 molded polymer case
Excellent dimension accuracy, mountability
and shock resistance
Products with lead-free terminations meet EU RoHS
requirements. EU RoHS regulation is not intended for
Pb-glass contained in electrode, resistor element and glass.
AEC-Q200 Qualified
ordering information
D: ±0.5%
F: ±1%
J: ±5%
T: Sn ±0.5%, ±1%: 4 digits
±2%, ±5%: 3 digits
All values less than 0.1
(100m) are expressed in m
with “L” as decimal
Ex: 2m= 2L00
0.1: R100; 5m: 5L0
1: 1W
2: 2W
SL TE: 7" embossed plastic
TED: 10" embossed plastic
For further information on
packaging please refer to
Appendix A
SL
Type Power Rating Nominal
Resistance Tolerance
Termination
Material Packaging
1 TE 10L0 FT
dimensions and construction
W
t
L
a
b
cc Molded
Resin Resistive
Element
Electrode
.453±.012
(11.5±0.3) .276±.008
(7.0±0.2) .098±.008
(2.5±0.2) .197±.008
(5.0±0.2) .102±.02
(2.6±0.5)
SL1
(2512)
SL2
(4527)
cbatWL Dimensions inches (mm)
.248±.012
(6.3±0.3) .122±.008
(3.1±0.2) .075±.008
(1.9±0.2) .047±.008
(1.2±0.2)
.067±.008
(1.7±0.2)
.047±.012
(1.2±0.3)
.094±.008
(2.4±0.2)
Size
Code
EU
Derating Curve
% Rated Power
100
80
60
40
20
-60 -40 0 40 60 80 100 180
70
20
Ambient Temperature
(°C)
0120
-20 140 160
-55
% Rated Power
100
80
60
40
20
-60 -40 0 40 60 80 100 18020
Terminal Part Temperature
(°C)
0
120
-20 140
-55 160
90
For resistors operated at an ambient temperature
of 70°C or above, a power rating shall be derated
in accordance with the above derating curve.
For resistors operated at a terminal part temperature of described for each size
or above, a power rating shall be derated in accordance with the derating curve.
Please refer to “Introduction of the derating curve based on the terminal part
temperature” in the beginning of our catalog before use.
current
sense
environmental applications
SL1, SL2
surface mount molded current sense resistors
Absolute
Maximum
Working
Voltage
Resistance Range (Ω)*
Part
Designation
Absolute
Maximum
Overload
Voltage
Operating
Temp.
Range
Power
Rating
T.C.R.
(ppm/°C)
Max.
applications and ratings
SL2 2W 500V 1000V
-55°C to
+180°C
Rated
Terminal Part
Temperature
±100
365m ~
1M
If any questions should arise whether to use the “Rated Ambient Temperature” or the “Rated Terminal Part Temperature,” please give priority
to the “Rated Terminal Part Temperature.” Prior to use and for more details refer to “Introduction of the derating curves on the terminal part
temperature” in the beginning of the catalog.
SL1 1W 200V 400V
±100
105m -
1M
90°C
90°C
Rated
Ambient
Temp.
70°C 365m ~
1M
105m -
1M
390m ~
22M
110m -
22M
D: ±0.5%
E24,E96*** F: ±1%
E24,E96*** J: ±5%
E24
Surface Temperature Rise
Temperature Rise
(°C)
150
100
50
50 100
% Rated Power
SL2 (2)
0
025 75
2
1
25
75
125
SL2 (1)
* 1Ω
5mm pattern
Performance Characteristics
Temperature Rise
(°C)
200
100
50
50 100
% Rated Power
0
025 75
SL1 (2)
SL1 (1)
2
25
75
150
175
125
* 1Ω
5mm pattern
SL2
SL1
Parameter Requirement R ±%
Limit Typical Test Method
Resistance
T.C.R.
25°C
+25°C/+125°C
Within specified
tolerance
Within specified
T.C.R.
Resistance to Solder Heat 260°C ± 5°C, 10 ± 1 second
±1% ±1%
Overload (Short time) Rated power x 5 for 5 seconds
±1% ±1%
Rapid Change of Temperature -55°C (30 minutes), +150°C (30 minutes), 100 cycles
±1% ±1%
Moisture Resistance 40°C ± 2°C, 90%~95%RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle
±2% ±0.5%
Endurance at 70°C 70°C ± 2°C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle
±2% ±0.5%
Low Temperature Exposure -55°C, 1 hour
±0.5% ±0.25%
Regarding the temperature rise, the value of the temperature varies per conditions and
board for use since the temperature is measured under our measuring conditions.
Rated voltage = Power Rating X Resistance Value or Max. working voltage, whichever is lower
135
KOA Speer Electronics, Inc. 199 Bolivar Drive Bradford, PA 16701 USA 814-362-5536 Fax: 814-362-8883 www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 11/14/17
current
sense