MMBT2222L, MMBT2222AL, SMMBT2222AL General Purpose Transistors NPN Silicon www.onsemi.com Features * These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS * Compliant S Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable COLLECTOR 3 1 BASE 2 EMITTER MAXIMUM RATINGS Rating Collector -Emitter Voltage Symbol VCBO Collector Current - Peak (Note 3) 3 Vdc 1 60 75 2 VEBO MMBT2222L MMBT2222AL, SMMBT2222AL Collector Current - Continuous Vdc 30 40 MMBT2222L MMBT2222AL, SMMBT2222AL Emitter -Base Voltage Unit VCEO MMBT2222L MMBT2222AL, SMMBT2222AL Collector -Base Voltage Value SOT-23 CASE 318 STYLE 6 Vdc 5.0 6.0 IC 600 mAdc ICM 1100 mAdc Symbol Max Unit 225 1.8 mW mW/C 556 C/W 300 2.4 mW mW/C MARKING DIAGRAM THERMAL CHARACTERISTICS Characteristic Total Device Dissipation FR- 5 Board (Note 1) TA = 25C Derate above 25C Thermal Resistance, Junction-to-Ambient Total Device Dissipation Alumina Substrate (Note 2) TA = 25C Derate above 25C PD RqJA PD Thermal Resistance, Junction-to-Ambient RqJA 417 C/W Junction and Storage Temperature Range TJ, Tstg -55 to +150 C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. FR- 5 = 1.0 0.75 0.062 in. 2. Alumina = 0.4 0.3 0.024 in. 99.5% alumina. 3. Reference SOA curve. (c) Semiconductor Components Industries, LLC, 1994 October, 2016 - Rev. 11 1 xxx M G G 1 xxx = 1P or M1B M = Date Code* G = Pb-Free Package (Note: Microdot may be in either location) *Date Code orientation and/or overbar may vary depending upon manufacturing location. ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 6 of this data sheet. Publication Order Number: MMBT2222LT1/D MMBT2222L, MMBT2222AL, SMMBT2222AL ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Characteristic Symbol Min Max Unit OFF CHARACTERISTICS Collector -Emitter Breakdown Voltage (IC = 10 mAdc, IB = 0) MMBT2222 MMBT2222A V(BR)CEO 30 40 - - Vdc Collector -Base Breakdown Voltage (IC = 10 mAdc, IE = 0) MMBT2222 MMBT2222A V(BR)CBO 60 75 - - Vdc Emitter -Base Breakdown Voltage (IE = 10 mAdc, IC = 0) MMBT2222 MMBT2222A V(BR)EBO 5.0 6.0 - - Vdc - 10 Collector Cutoff Current (VCE = 60 Vdc, VEB(off) = 3.0 Vdc) MMBT2222A, SMMBT2222A ICEX Collector Cutoff Current (VCB = 50 Vdc, IE = 0) (VCB = 60 Vdc, IE = 0) (VCB = 50 Vdc, IE = 0, TA = 125C) (VCB = 60 Vdc, IE = 0, TA = 125C) MMBT2222 MMBT2222A, SMMBT2222A MMBT2222 MMBT2222A, SMMBT2222A ICBO - - - - 0.01 0.01 10 10 mAdc Emitter Cutoff Current (VEB = 3.0 Vdc, IC = 0) MMBT2222A, SMMBT2222A IEBO - 100 nAdc IBL - 20 nAdc 35 50 75 35 100 50 30 40 - - - - 300 - - - MMBT2222 MMBT2222A, SMMBT2222A - - 0.4 0.3 MMBT2222 MMBT2222A, SMMBT2222A - - 1.6 1.0 MMBT2222 MMBT2222A, SMMBT2222A - 0.6 1.3 1.2 MMBT2222 MMBT2222A, SMMBT2222A - - 2.6 2.0 250 300 - - - 8.0 - - 30 25 2.0 0.25 8.0 1.25 - - 8.0 4.0 50 75 300 375 Base Cutoff Current (VCE = 60 Vdc, VEB(off) = 3.0 Vdc) MMBT2222A, SMMBT2222A nAdc ON CHARACTERISTICS DC Current Gain (IC = 0.1 mAdc, VCE = 10 Vdc) (IC = 1.0 mAdc, VCE = 10 Vdc) (IC = 10 mAdc, VCE = 10 Vdc) (IC = 10 mAdc, VCE = 10 Vdc, TA = -55C) (IC = 150 mAdc, VCE = 10 Vdc) (Note 4) (IC = 150 mAdc, VCE = 1.0 Vdc) (Note 4) (IC = 500 mAdc, VCE = 10 Vdc) (Note 4) Collector -Emitter Saturation Voltage (Note 4) (IC = 150 mAdc, IB = 15 mAdc) (IC = 500 mAdc, IB = 50 mAdc) Base -Emitter Saturation Voltage (Note 4) (IC = 150 mAdc, IB = 15 mAdc) (IC = 500 mAdc, IB = 50 mAdc) hFE MMBT2222A only MMBT2222 MMBT2222A, SMMBT2222A - VCE(sat) Vdc VBE(sat) Vdc SMALL- SIGNAL CHARACTERISTICS Current -Gain - Bandwidth Product (Note 5) (IC = 20 mAdc, VCE = 20 Vdc, f = 100 MHz) fT MMBT2222 MMBT2222A, SMMBT2222A Output Capacitance (VCB = 10 Vdc, IE = 0, f = 1.0 MHz) Input Capacitance (VEB = 0.5 Vdc, IC = 0, f = 1.0 MHz) MHz Cobo pF Cibo MMBT2222 MMBT2222A, SMMBT2222A Input Impedance (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) (IC = 10 mAdc, VCE = 10 Vdc, f = 1.0 kHz) MMBT2222A, SMMBT2222A MMBT2222A, SMMBT2222A Voltage Feedback Ratio (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) (IC = 10 mAdc, VCE = 10 Vdc, f = 1.0 kHz) MMBT2222A, SMMBT2222A MMBT2222A, SMMBT2222A Small -Signal Current Gain (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) (IC = 10 mAdc, VCE = 10 Vdc, f = 1.0 kHz) MMBT2222A, SMMBT2222A MMBT2222A, SMMBT2222A pF hie kW X 10- 4 hre hfe www.onsemi.com 2 - MMBT2222L, MMBT2222AL, SMMBT2222AL ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Characteristic Symbol Min Max 5.0 25 35 200 - 150 - 4.0 Unit SMALL- SIGNAL CHARACTERISTICS mmhos hoe Output Admittance (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) (IC = 10 mAdc, VCE = 10 Vdc, f = 1.0 kHz) MMBT2222A, SMMBT2222A MMBT2222A, SMMBT2222A Collector Base Time Constant (IE = 20 mAdc, VCB = 20 Vdc, f = 31.8 MHz) MMBT2222A, SMMBT2222A rb, Cc Noise Figure (IC = 100 mAdc, VCE = 10 Vdc, RS = 1.0 kW, f = 1.0 kHz) MMBT2222A, SMMBT2222A ps NF dB SWITCHING CHARACTERISTICS (MMBT2222A only) Delay Time Rise Time (VCC = 30 Vdc, VBE(off) = - 0.5 Vdc, IC = 150 mAdc, IB1 = 15 mAdc) td - 10 tr - 25 (VCC = 30 Vdc, IC = 150 mAdc, IB1 = IB2 = 15 mAdc) ts - 225 tf - 60 Storage Time Fall Time ns ns Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 4. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2.0%. 5. fT is defined as the frequency at which |hfe| extrapolates to unity. SWITCHING TIME EQUIVALENT TEST CIRCUITS +30 V +30 V 1.0 to 100 ms, DUTY CYCLE 2.0% +16 V 200 +16 V 1.0 to 100 ms, DUTY CYCLE 2.0% 200 0 0 -2 V 1 kW < 2 ns 1k -14 V CS* < 10 pF < 20 ns CS* < 10 pF 1N914 -4 V Scope rise time < 4 ns *Total shunt capacitance of test jig, connectors, and oscilloscope. Figure 1. Turn-On Time Figure 2. Turn-Off Time hFE , DC CURRENT GAIN 1000 700 500 TJ = 125C 300 200 25C 100 70 50 -55C 30 VCE = 1.0 V VCE = 10 V 20 10 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 20 30 IC, COLLECTOR CURRENT (mA) Figure 3. DC Current Gain www.onsemi.com 3 50 70 100 200 300 500 700 1.0 k VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) MMBT2222L, MMBT2222AL, SMMBT2222AL 1.0 TJ = 25C 0.8 0.6 IC = 1.0 mA 10 mA 150 mA 500 mA 0.4 0.2 0 0.005 0.01 0.02 0.03 0.05 0.1 0.2 0.3 0.5 1.0 IB, BASE CURRENT (mA) 2.0 3.0 5.0 10 20 30 50 Figure 4. Collector Saturation Region 200 500 IC/IB = 10 TJ = 25C tr @ VCC = 30 V td @ VEB(off) = 2.0 V td @ VEB(off) = 0 30 20 10 7.0 5.0 200 ts = ts - 1/8 tf 100 70 50 tf 30 20 10 7.0 5.0 3.0 2.0 5.0 7.0 10 200 300 20 30 50 70 100 IC, COLLECTOR CURRENT (mA) 5.0 7.0 10 500 Figure 5. Turn -On Time 200 300 500 10 RS = OPTIMUM RS = SOURCE RS = RESISTANCE IC = 1.0 mA, RS = 150 W 500 mA, RS = 200 W 100 mA, RS = 2.0 kW 50 mA, RS = 4.0 kW f = 1.0 kHz 8.0 NF, NOISE FIGURE (dB) NF, NOISE FIGURE (dB) 6.0 20 30 50 70 100 IC, COLLECTOR CURRENT (mA) Figure 6. Turn -Off Time 10 8.0 VCC = 30 V IC/IB = 10 IB1 = IB2 TJ = 25C 300 t, TIME (ns) t, TIME (ns) 100 70 50 4.0 2.0 IC = 50 mA 100 mA 500 mA 1.0 mA 6.0 4.0 2.0 0 0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 0 50 50 100 100 200 500 1.0 k 2.0 k 5.0 k 10 k 20 k f, FREQUENCY (kHz) RS, SOURCE RESISTANCE (OHMS) Figure 7. Frequency Effects Figure 8. Source Resistance Effects www.onsemi.com 4 50 k 100 k f T, CURRENT-GAIN BANDWIDTH PRODUCT (MHz) MMBT2222L, MMBT2222AL, SMMBT2222AL 30 CAPACITANCE (pF) 20 Ceb 10 7.0 5.0 Ccb 3.0 2.0 0.1 0.2 0.3 20 30 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 REVERSE VOLTAGE (VOLTS) 50 500 VCE = 20 V TJ = 25C 300 200 100 70 50 1.0 Figure 9. Capacitances 70 100 IC/IB = 10 1.2 VBE(sat), BASE-EMITTER SATURATION VOLTAGE (V) VCE(sat), COLLECTOR-EMITTER SATURATION VOLTAGE (V) 50 1.3 IC/IB = 10 150C 0.1 -55C 25C 1.1 1.0 0.9 -55C 0.8 25C 0.7 0.6 150C 0.5 0.4 0.3 0.2 0.01 0.001 0.01 0.1 0.001 1 0.01 1 0.1 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 11. Collector Emitter Saturation Voltage vs. Collector Current Figure 12. Base Emitter Saturation Voltage vs. Collector Current 1.2 +0.5 VCE = 1 V 0 1.0 0.9 COEFFICIENT (mV/ C) VBE(on), BASE-EMITTER VOLTAGE (V) 3.0 5.0 7.0 10 20 30 IC, COLLECTOR CURRENT (mA) Figure 10. Current-Gain Bandwidth Product 1 1.1 2.0 -55C 0.8 25C 0.7 0.6 0.5 150C 0.4 RqVC for VCE(sat) -0.5 -1.0 -1.5 RqVB for VBE -2.0 0.3 0.2 -2.5 0.001 0.01 0.1 1 0.1 0.2 IC, COLLECTOR CURRENT (A) 0.5 1.0 2.0 5.0 10 20 50 100 200 IC, COLLECTOR CURRENT (mA) Figure 14. Temperature Coefficients Figure 13. Base Emitter Voltage vs. Collector Current www.onsemi.com 5 500 MMBT2222L, MMBT2222AL, SMMBT2222AL 10 10 ms 100 ms 1 1 ms 1s IC (A) Thermal Limit 0.1 0.01 0.001 Single Pulse Test @ TA = 25C 0.01 0.1 1 10 100 VCE (Vdc) Figure 15. Safe Operating Area ORDERING INFORMATION Device MMBT2222LT1G MMBT2222ALT1G, SMMBT2222ALT1G MMBT2222LT3G MMBT2222ALT3G, SMMBT2222ALT3G Specific Marking Code Package Shipping M1B SOT-23 (Pb-Free) 3000 / Tape & Reel 1P SOT-23 (Pb-Free) 3000 / Tape & Reel M1B SOT-23 (Pb-Free) 10,000 / Tape & Reel 1P SOT-23 (Pb-Free) 10,000 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *S Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable. www.onsemi.com 6 MMBT2222L, MMBT2222AL, SMMBT2222AL PACKAGE DIMENSIONS SOT-23 (TO-236) CASE 318-08 ISSUE AR D NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF THE BASE MATERIAL. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. 0.25 3 E 1 2 T HE DIM A A1 b c D E e L L1 HE T L 3X b L1 VIEW C e TOP VIEW A A1 SIDE VIEW c SEE VIEW C MIN 0.89 0.01 0.37 0.08 2.80 1.20 1.78 0.30 0.35 2.10 0 MILLIMETERS NOM MAX 1.00 1.11 0.06 0.10 0.44 0.50 0.14 0.20 2.90 3.04 1.30 1.40 1.90 2.04 0.43 0.55 0.54 0.69 2.40 2.64 --- 10 MIN 0.035 0.000 0.015 0.003 0.110 0.047 0.070 0.012 0.014 0.083 0 INCHES NOM 0.039 0.002 0.017 0.006 0.114 0.051 0.075 0.017 0.021 0.094 --- MAX 0.044 0.004 0.020 0.008 0.120 0.055 0.080 0.022 0.027 0.104 10 STYLE 6: PIN 1. BASE 2. EMITTER 3. COLLECTOR END VIEW RECOMMENDED SOLDERING FOOTPRINT* 3X 2.90 3X 0.90 0.95 PITCH 0.80 DIMENSIONS: MILLIMETERS *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 7 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MMBT2222LT1/D