Radial Tape JL CONNECTOR 2.5mm pitch/Board-to-board connectors Specifications ------------------- * Current rating: 3A AC, DC * Voltage rating: 250V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/10m max. After environmental testing/20m max. * Insulation resistance: 1,000M min. * Withstanding voltage: 1,000V AC/minute * Applicable PC board thickness: 1.6mm * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. The JL connector is designed for board-toboard connection in electronic equipment requiring high-density mounting and unitization. This connector is highly resistant to equipment vibration and shock. * High contact pressure * Housing lock assures good connection even after severe shock & vibration * Reinforcing pins increase PCB mounting durability * Polarized, fully shrouded header aligns the connector halves before their pins make contact Standards ---------------------- 0 Recognized E60389 1 Certified LR20812 PC board layout (viewed from soldering side) and Assembly layout Receptacle on radial-tape 1.00.05 6.5 12.4 16.3 0.90.1 0 2.1min 2.6 0.05 0.90.1 0 1.0 0.05 2.8 0.05 0.9 1.80.05 1.8 0.05 3.6 0.05 2.9 min 0.90.1 0 2.50.05 2.5 min 2.50.05 1.80.05 2.50.05 2.7min 0.1 0 Shrouded header 6.5 0.05 Receptacle 3.6 1.8 4.5 3.0 0.90.1 0 Note: 1. Tolerances are non-cumulative: 0.05mm for all centers. 2. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details. 1 JL CONNECTOR Receptacle Circuits B 7.4 3 5.7 4 5 6 2.6 3.4 3.8 7 1.8 2.7 2.5 0.6 A 0.64 3.6 8 9 10 11 12 1.8 2.9 13 15 Dimensions (mm) A B Model No. 03JL-BT-E 04JL-BT-E 05JL-BT-E 06JL-BT-E 07JL-BT-E 08JL-BT-E 09JL-BT-E 10JL-BT-E 11JL-BT-E 12JL-BT-E 13JL-BT-E 15JL-BT-E Q'ty / box 5.0 8.2 250 7.5 10.7 200 10.0 13.2 200 12.5 15.7 200 15.0 18.2 200 17.5 20.7 100 20.0 23.2 100 22.5 25.7 100 25.0 28.2 100 27.5 30.7 100 30.0 33.2 100 35.0 38.2 50 Material and Finish Contact: Phosphor bronze, tin-plated (reflow treatment) Housing: PA 66, UL94V-0, blue Reinforcing pins: Brass, copper-undercoated, tin-plated (reflow treatment) RoHS compliance This product displays (LF)(SN) on a label. Receptacle on radial-tape Circuits 5 6 7 B A 8 7.4 Model No. Dimensions (mm) A B 05JL-BT-M-T 06JL-BT-M-T 07JL-BT-M-T 08JL-BT-M-T Q'ty / box 10.0 15.4 400 12.5 17.9 400 15.0 20.4 400 17.5 22.9 400 0.64 9.5 9.0 2.8 2.6 Material and Finish Contact: Phosphor bronze, tin-plated (reflow treatment) Housing: PA 66, UL94V-0 Reinforcing pins: Brass, copper-undercoated, tin-plated (reflow treatment) RoHS compliance This product displays (LF)(SN) on a label. 1.8 Shrouded header Circuits Enlarged views of lock shape are shown below. B 8.0 3 4 6.1 5 6 7 1.0 2.5 2.5 0.64 A 0.8 3.4 2.6 8 9 10 2.1 8.6 11 12.5 12 13 15 Shapes of Lock secure lock type friction lock type Model No. secure lock type friction lock type S3B-JL-F-E S3B-JL-R S4B-JL-F-E S4B-JL-R S5B-JL-F-E S5B-JL-R S6B-JL-F-E S6B-JL-R S7B-JL-F-E S7B-JL-R S8B-JL-F-E S8B-JL-R S9B-JL-F-E S9B-JL-R S10B-JL-F-E S10B-JL-R S11B-JL-F-E S11B-JL-R S12B-JL-F-E S12B-JL-R S13B-JL-F-E S13B-JL-R S15B-JL-F-E S15B-JL-R Dimensions (mm) A B 10.0 250 7.5 12.5 200 10.0 15.0 200 12.5 17.5 200 15.0 20.0 200 17.5 22.5 100 20.0 25.0 100 22.5 27.5 100 25.0 30.0 100 27.5 32.5 100 30.0 35.0 100 35.0 40.0 100 Material and Finish Post: Brass, copper-undercoated, tin-plated (reflow treatment) Wafer: PA 66, UL94V-0, red (secure lock type), blue (friction lock type) Reinforcing pins: Brass, tin-plated (reflow treatment) RoHS compliance This product displays (LF)(SN) on a label. 2 Q'ty / box 5.0 JL CONNECTOR Packaging specifications Package type Distance between folds Box size D TERMIN H ALS & CONN Distance between the end of the tape and the first connector's center line (either end) Quantity 58 circuits Flat pack ECTORS Flat pack (zigzag folded) 24 indexing holes per fold (304.8mm) 315()x48()x285()mm 19.05mm 400 pcs. / box Note: Products of different packaging specifications are also available. Contact JST for details. R W Distance between the end of the tape and the first connector's center line (either end) Tail tape Leader tape Taping Specifications 18.0 9.0 6.0 20.6 25.4 4.0 3.85 5.0 12.7 Note: Conforms to JIC C 0806 of "Tape packaging of components with unidirectional leads on continuous tapes". 3