Emboss Tape XH CONNECTOR Radial Tape 2.5mm pitch/Disconnectable Crimp style connectors Specifications ------------------- 1 * Current rating: 3 A AC, DC (AWG #22) * Voltage rating: 250 V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/ 10 m max. After environmental tests/ 20 m max. * Insulation resistance: 1,000 M min. * Withstanding voltage: 1,000 VAC/minute * Applicable wire: AWG #30 to #22 * Applicable PC board thickness: 1.6 mm 5 JS T The XH connector was developed based on the high reliability and versatility of our NH series connectors. The connector is very small with a mounting height of 9.8mm. * In using the products, refer to "Handling Precaution for Terminal and Connector" described on our website (Technical documents of Product information page). * Contact JST for details. * RoHS2 compliance. * Original folded beam contact * Box-shaped shrouded header * Header with a boss * Interchangeability * Conforming to the HA terminal Standards ---------------------- 0 Recognized E60389 2 J50014297 PC board layout and Assembly layout Through-hole type (viewed from soldening side) Top entry type 5.75 2.5 0.05 Side entry type 2.5min 2.5 0.05 2.5min 14.3 6.1 9.2 min 2 circuits:1 0.05 3 circuits or more:0.9 0.1 0 7 3.4min 9.8 11.5 0 0.9 0.1 Top entry type with a boss <2 circuits or more> <Single circuit> 2.5 0.05 5.75 1.60.05 9.8 4.35 0.05 2 0.05 3.4 min 2.5 min 1.7 0.1 0 7 1.10.2 0 0.05 0.9 2 circuits:1 0.1 3 circuits or more:0.9 0 0.1 0 Note: 1. Tolerances are non-cumulative: 0.05 mm for all centers. 2. Hole dimensions differ according to the type of PC board and piercing method. If PC boards made of hard material are used, the hole dimensions should be larger. The dimensions above should serve as a guideline. Contact JST for details. 11 SMT type (viewed from component side) Side entry type End face of wafer on the mating side 2.3 Note: 1. Tolerances are non-cumulative: 0.05 mm for all centers. 2. The dimensions above should serve as a guideline. Contact JST for details. 1 1.8 3.9 0.2 6.5 1.3 2.5 XH CONNECTOR Contact Shape A 1.95 1.6 1.8 Model No. Shape SXH-001T-P0.6N SXH-001T-P0.6 SXH-002T-P0.6 A Shape B 2 B Applicable Wire AWG# mm2 Insulation O.D (mm) Q'ty/ reel 5,000 0.130.33 2622 1.31.9 0.080.33 2822 0.91.9 0.050.13 3026 0.91.3 8,000 2.4 2.35 Material and Finish Phosphor bronze, tin-plated (reflow treatment) 6.5 6.5 Contact Applicator Dies Crimping machine Crimp applicator SXH-001T-P0.6N AP-K2N SXH-001T-P0.6 RoHS2 compliance Note: 1. Contact JST if you require gold-plated contacts or contacts made of brass. 2. Contact JST also if you require shielded wires, thin wires or other special wires. 3. SXH-001T-P0.6N is low-insertion force type contact, for easier insertion/ withdrawal, which would be less resistant to the vibration. Crimp applicator with dies MKS-L MK/SXH-001-06N APLMK SXH001-06N *MKS-SC SC/SXH-001-06N APLSC SXH001-06N MKS-L MK/SXH-001-06 APLMK SXH001-06 *MKS-SC SC/SXH-001-06 APLSC SXH001-06 Applicator Dies Crimp applicator with dies MKS-L MK/SXH-002-06 APLMK SXH002-06 *MKS-SC SC/SXH-002-06 APLSC SXH002-06 Crimping machine Crimp applicator Contact SXH-002T-P0.6 AP-K2N Note: *Strip-crimp applicator 7.75 Housing Circuits Model No. 1 XHP-1 XHP-2 XHP-2(10.0)-U XHP-3 XHP-4 XHP-5 XHP-6 XHP-6(5.0)-U XHP-7 XHP-8 XHP-9 XHP-10 XHP-11 XHP-12 XHP-13 XHP-14 XHP-15 XHP-16 XHP-20 2 2 4.1 3 5.7 4 5 6 Circuit No.1 mark 6 2.5 A 7 B C 8 9 10 Plugged up <2 circuits 10.0 mm pitch> 11 12 13 7.75 14 15 16 20 4.1 5.7 A Dimensions (mm) B C Q'ty/ bag 3.2 4.8 1,000 2.5 5.7 7.3 1,000 10.0 13.2 14.8 1,000 5.0 8.2 9.8 1,000 7.5 10.7 12.3 1,000 10.0 13.2 14.8 1,000 12.5 15.7 17.3 1,000 25.0 28.2 29.8 1,000 15.0 18.2 19.8 1,000 17.5 20.7 22.3 1,000 20.0 23.2 24.8 1,000 22.5 25.7 27.3 1,000 25.0 28.2 29.8 1,000 27.5 30.7 32.3 1,000 30.0 33.2 34.8 1,000 32.5 35.7 37.3 1,000 35.0 38.2 39.8 1,000 37.5 40.7 42.3 1,000 47.5 50.7 52.3 500 Material and Finish PA 6, UL94V-0, natural (white) Circuit No.1 mark RoHS2 compliance Note: 1. XHP-2(10.0)-U is 2 circuits 10.0mm pitch plugged up. Not UL/TUV approved. 2. XHP-6(5.0)-U is 6 circuits 5.0mm pitch plugged up. Not UL/TUV approved. A B C <6 circuits 5.0 mm pitch> 7.75 <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. 4.1 5.7 Circuit No.1 mark XHP-1-oo(blank)...natural (white) BK...black R...red E...blue Y...yellow L...lemon yellow M...green D...orange N...brown FY...vivid yellow <Plugged up type> ex. A B XHP-2(10.0)-U-oo(blank)...natural (white) R...red E...blue C 2 XH CONNECTOR Through-hole type shrouded header The shrouded headers are interchangeable with those of the NR and NRD insulation displacement connectors, and JQ board-to-board connectors. Top entry type Circuits 0.64 2 plugged up 7 2 3 4 3.4 5 6 2.45 A 7 2.35 B 8 5.75 9 Top entry type 10 11 <3 circuits or more> <2 circuits> 0.64 12 0.64 13 14 7 7 15 16 3.4 3.4 20 2.35 B 2.35 A 2.45 Side entry type 0.64 11.5 7 2.5 2.45 6.1 A Post: Brass, copper-undercoated, tin-plated (reflow treatment) Wafer: PA 66, UL94V-0, natural (white) 5.75 B 5.75 S( )B-XH-A-1: 7.6 S( )B-XH-A: 9.2 A Model No. Q'ty/box Dimensions (mm) Side entry type Top entry type Side entry type A B 1,000 7.4 1,000 2.5 S2B-XH-A-1 S2B-XH-A - 14.9 1,000 10.0 -- -- 1,000 9.9 1,000 5.0 S3B-XH-A-1 S3B-XH-A 500 12.4 500 7.5 S4B-XH-A-1 S4B-XH-A 500 14.9 500 10.0 S5B-XH-A-1 S5B-XH-A 500 17.4 500 12.5 S6B-XH-A-1 S6B-XH-A 250 19.9 500 15.0 S7B-XH-A-1 S7B-XH-A 250 22.4 250 17.5 S8B-XH-A-1 S8B-XH-A 250 24.9 250 20.0 S9B-XH-A-1 S9B-XH-A 250 27.4 250 22.5 S10B-XH-A-1 S10B-XH-A 250 29.9 250 25.0 S11B-XH-A-1 S11B-XH-A 200 32.4 250 27.5 S12B-XH-A-1 S12B-XH-A 200 34.9 250 30.0 S13B-XH-A-1 S13B-XH-A 200 37.4 250 32.5 S14B-XH-A-1 S14B-XH-A 100 39.9 250 35.0 S15B-XH-A-1 S15B-XH-A 100 42.4 200 37.5 -- S16B-XH-A - 52.4 100 47.5 -- -- Material and Finish 2.5 2.45 Top entry type B2B-XH-A B2(10.0)B-XH-A-U B3B-XH-A B4B-XH-A B5B-XH-A B6B-XH-A B7B-XH-A B8B-XH-A B9B-XH-A B10B-XH-A B11B-XH-A B12B-XH-A B13B-XH-A B14B-XH-A B15B-XH-A B16B-XH-A B20B-XH-A RoHS2 compliance This product displays (LF)(SN) on a label. Note: B2(10.0)B-XH-A-U is 2 circuits 10.0mm pitch plugged up. Not UL/TU V approved. <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. 3.4 B S3B-XH-A(-1)-oo(blank)...natural (white) BK...black R...red E...blue Y...yellow L...lemon yellow M...green D...orange N...brown FY...vivid yellow Through-hole type shrouded header Top entry type of glass-filled nylon 0.64 <2 circuits> Circuits Model No. 2 B2B-XH-2 B3B-XH-2 B4B-XH-2 B5B-XH-2 B6B-XH-2 B7B-XH-2 B8B-XH-2 B9B-XH-2 B10B-XH-2 B11B-XH-2 B12B-XH-2 B13B-XH-2 B14B-XH-2 B15B-XH-2 3 7 4 5 3.4 6 2.45 7 8 5.75 A B 9 6.75 10 <3 to 8 circuits> 11 12 7 13 14 3.4 15 2.5 6.75 7.4 1,000 5.0 9.9 1,000 7.5 12.4 500 10.0 14.9 500 12.5 17.4 500 15.0 19.9 500 17.5 22.4 250 20.0 24.9 250 22.5 27.4 250 25.0 29.9 250 27.5 32.4 250 30.0 34.9 250 32.5 37.4 250 35.0 39.9 250 RoHS2 compliance This product displays (LF)(SN) on a label. <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. 7 <9 circuits or more> 3.4 ex. 2.5 .45 0.64 A B 3 5.75 Q'ty/ bag 2.5 Post: Brass, copper-undercoated, tin-plated (reflow treatment) Wafer: Glass-filled PA 66, UL94V-0, natural (ivory) 5.75 B Dimensions (mm) B Material and Finish 0.64 A 2.45 A B2B-XH-2-oo(blank)...natural (ivory) C...black R...red E...blue Y...yellow M...green XH CONNECTOR Through-hole type shrouded header The shrouded headers are interchangeable with those of the NR and NRD insulation displacement connectors, and JQ board-to-board connectors. Top entry type with a boss <Single circuit> Circuits Model No. 1 *B1B-XH-AM B2B-XH-AM B3B-XH-AM B4B-XH-AM B5B-XH-AM B6B-XH-AM B7B-XH-AM B8B-XH-AM B9B-XH-AM B10B-XH-AM B12B-XH-AM 2 0.64 3 4 7 5 6 2.7 3.4 7 8 1.5 2.35 4.9 <2 circuits> 9 4.35 10 5.75 12 A Dimensions (mm) B Q'ty/ box 1,000 2.5 7.4 1,000 5.0 9.9 1,000 7.5 12.4 500 10.0 14.9 500 12.5 17.4 500 15.0 19.9 500 17.5 22.4 250 20.0 24.9 250 22.5 27.4 250 27.5 32.4 250 Material and Finish 0.64 Post: Brass, copper-undercoated, tin-plated (reflow treatment) Wafer: PA 66, UL94V-0, natural (white) 3.4 1.5 7 RoHS2 compliance This product displays (LF)(SN) on a label. Note: *Marked product is not approved by UL/TU V standards. <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. 1 2.45 2.35 1.6 A B 2 ex. 5.75 B1B-XH-AM-oo(blank)...natural (white) BK...black R...red E...blue Y...yellow L...lemon yellow M...green 3.4 1.5 7 <3 circuits or more> 0.64 2.5 1 1.6 A (2.35) 2.45 2 5.75 B SMT type shrouded header 0.64 B Q'ty/ reel S3B-XH-SM4-TB 5.0 12.5 500 S4B-XH-SM4-TB 7.5 15.0 500 S6B-XH-SM4-TB 12.5 20.0 500 Model No. 3 4 6 5.5 Material and Finish Post: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Wafer: PA 6T, UL94V-0, natural (ivory) Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) 2.5 RoHS2 compliance This product displays (LF)(SN) on a label. Note: The products listed above are supplied on embossed-tape. A B 7 3 <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. 6 3.75 Dimensions (mm) A Circuits S3B-XH-SM4-oo-TB(blank)...natural (ivory) M...green R...red E...blue L...lemon yellow 4 XH CONNECTOR Through-hole type shrouded header on radial-tape TV4 type 2-TV4 type 2-TV4 type <3 to 4 circuits> <2 circuits> <3 to 8 circuits> B B A 6.75 2.45 Circuits 2 3 4 5 6 7 8 6.75 2.45 2.5 6.75 Model No. TV4 2-TV4 B2B-XH-2-TV4 B3B-XH-2-TV4 B3B-XH-TV4 B4B-XH-2-TV4 B4B-XH-TV4 B5B-XH-2-TV4 B6B-XH-2-TV4 B7B-XH-2-TV4 B8B-XH-2-TV4 7 7 0.7 2.8 0.64 A 2.5 0.7 0.64 Dimensions (mm) A B Q'ty/ box 1,000 5.0 9.9 1,000 7.5 12.4 500 10.0 14.9 500 12.5 17.4 500 15.0 19.9 500 17.5 22.4 500 2.8 2.5 7 2.45 7.4 0.64 0.7 RoHS2 compliance This product displays (LF)(SN) on a label. As the color identification, <For reference> the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. B2B-XH-2-TV4-oo(blank)...natural (TV4 type/white, 2-TV4 type/ivory) C...black (glass-filled) BK...black R...red E...blue Y...yellow M...green Material and Finish Post: Brass, copper-undercoated, tin-plated (reflow treatment) Wafer: TV4 type/ PA 66, UL94V-0, natural (white) 2-TV4 type/ Glass-filled PA 66, UL94V-0, natural (ivory) Taping specification Packaging specifications D 2 and 3 circuits :12.7 4 to 8 circuits : 25.4 6.75 TERMIN H ALS & CONN ECTORS R 20 W 9 6 Distance between the end of the tape and the first connector's center line (either end) Leader tape 18 Tail tape 4 2 circuits: 5.1 3 to 8 circuits: 3.85 2 circuits: 2.5 3 to 8 circuits: 5 12.7 Note: Conforms to JIC C 0806 of "Tape packaging of components with unidirectional leads on continuous tapes". 5 Package type Flat pack (zigzag folded) Distance between folds 24 indexing holes per fold (304.8 mm) Box size 316()x45()x330() mm Distance between the end of the tape and 19.05 mm the first connector's center line (either end) 1,000 pcs. / box 2, 3 circuits Quantity 500 pcs. / box 48 circuits Note: Products of different packaging specifications are also available. Contact JST for details.