FR103SG ........FR107SG 1.0 Amp. Glass Passivated Fast Recovery Rectifiers Pb A-405 Current 1.0 A Voltage 200 V to 1000 V * Glass passivated chip junction * High efficiency, Low VF * High current capability * High reliability * High surge current capability * Low power loss MECHANICAL DATA Dimensions in mm. * Cases: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Lead: Pure tin plated, lead free., solderable per MIL-STD-202, Method 208 guaranteed * Polarity: Color band denotes cathode end * High temperature soldering guaranteed: 260 C/10 seconds/9.5mm lead lengths at 2.3kg., tension * Mounting position: Any * Weight: 0.22 gram Maximun Ratings and Electrical Characteristics at 25 C FR 103SG FR 104SG FR 105SG FR 106SG FR 107SG VRRM Maximum Recurrent Peak Reverse Voltage (V) 200 400 600 800 1000 VRMS Maximum RMS Voltage (V) 140 280 420 560 700 VDC Maximum DC Blocking Voltage (V) 200 400 600 800 1000 I(AV) Maximum average Forward Rectified Current 9.5mm Lead Length @ TA = 55 C 1.0 A IFSM Peak Forward Surge Current 8.3 ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) 30 A VF Maximum Instantaneous Forward Voltage at 1.0A 1.3 V IR Maximum DC Reverse Current @ TA = 25 C at Rated DC Blocking Voltage @ TA = 125 C Trr Maximum Reverse Recovery Time From IF = 0.5 A; IR = 1.0 A; IRR = 0.25 A Cj Typical Junction Capacitance at 1MHz and reverse voltage of 4VDC 15 pF Rth (j-a) Typical Thermal Resistance (See note) 75 C/W Tj Operating Temperature Range -65 to + 150 C Tstg Storage Temperature Range -65 to + 150 C 5.0 A 100 A 150 nS 250 nS 500 nS Note: Mount on Cu-Pad Size 5mm x 5mm on PCB. Jun - 08 FR103SG ........FR107SG Rating And Characteristic Curves MAXIMUM FORWARD CURRENT DERATING CURVE TYPICAL FORWARD CHARACTERISTICS IF, instantaneous forward current (A) IF(AV), average forward current (A) 1.50 Single Phase Half Wave 60Hz Resistive or Inductive Load 9.5mm Lead Length 1.25 1.00 0.75 0.50 0.25 0 0 25 50 10 1.0 0.1 Tj = 25 C Pulse Width=300 s 1% Duty Cycle 0.01 0.4 75 100 125 150 175 Ambient temperature (C) 1 1.2 1.4 1.6 TYPICAL JUNCTION CAPACITANCE 100 50 Cj, junction capacitance (pF) IFSM, peak forward surge current (A) 0.8 VF, forward voltage (V) MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 40 30 Tj = 25 C 20 10 8.3ms Single Half Sine Wave JEDEC Method 0 1 2 4 6 10 20 Tj = 25 C 10 1 40 60 100 10 1 Number of cycles at 60 Hz TYPICAL REVERSE CHARACTERISTICS PER LEG IR, instantaneous reverse current (mA) 0.6 1000 100 VR, reverse voltage (V) REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50W NON INDUCTIVE trr 10W NON INDUCTIVE +0.5A 100 (-) DUT Tj = 125 C 10 PULSE GENERATOR (NOTE 2) (+) 50vDC (APPROX) (-) 1W NON INDUCTIVE OSCILLOSCOPE (NOTE 1) (+) -1.0A Tj = 75 C NOTES: 1. Rise Time = 7ns max. Input Impedance = 1 megohm 22 pf 2. Rise Time = 10 ns max. Sourse Impedance = 50 ohms 1 0 -0.25A 1cm SET TIME BASE FOR 5/ 10ns/ cm Tj = 25 C 0.1 0 20 40 60 80 100 120 140 Percent of rated peak reverse voltage (%) Jun - 08