APPLICATION TOOLING Crimping tools and machines The arrow mark indicates the press that is applicable to the applicator. Crimping tools and machines Strip-crimp applicator for side feeding terminals Crimping applicator for end-feeding terminals MKS-SC MK-L Crimping applicator for side-feeding terminals Crimping applicator for end-feeding flag terminals MKS-L MKF-L Semi-automatic press Semi-automatic crimping machines (presses) contact a wire to a chain terminal each time a footswitch is pressed. AP-K2N * Dimensions: (WxLxH)280x480x505 mm * Weight: Approx. 90 kg(198 lb) * Power source: 100 VAC, Single-phase 50/60 Hz * Pressure output: 14.7 kN[1,500 kg(3307 lb)] * Dies: Applicator replacement 1 2 Hand tools Crimping tools Crimping tools Hand tools for chain terminals Terminals and parts model number in alphabetical order Hand tools for loose piece terminals Extraction and Insertion tools for loose piece terminals YRS YC YRM YRF YRK YRK-EX series series series series series series Dimensions: (WxL) 59x224 mm Dimensions: (WxL) 70x296 mm Dimensions: (WxL) 59x224 mm Dimensions: (WxL) 70x295 mm 80x305 mm Dimensions: (WxLxD) 75x314x25 mm Dimensions: (WxLxD) 75x314x25 mm Extraction tool Insertion tool Crimping tools It is the manual tool that is convenience to terminate very small quantity of contacts for prototype or maintenance. It is composed of two crimping dies for the conductor and insulation, and can be crimp easily. YRK and YRK-EX can be used for mass-production. Note: (1) These tools are for prototype tooling or repair. (2) YC tool has two crimping sections (A and B). YRS tool has also two crimping sections by inverting upper dies. Be sure to check applicable wires before use. Since the dies are fixed, the crimping height cannot be adjusted. Therefore, some of the applicable wires described in this catalog may not be crimped properly. Before use, check for proper crimping (such as tensile strength, terminal/contact deformation). (3) These tools are not applicable to 2-wire crimping. (4) When hand crimping board-in terminals (SAN, SCN, SDN, SGN, SIN, SJN, SZN), care should be taken not to contaminate the solder tails of the terminals, as with greasy or oily fingers. If a solder problem arises, some cleaning of the tips of the terminal is advisable. (5) WC and JUC hand tools are provided by J.S.T.(U.K.) LTD. and contact them about the details of these hand tools. YRS series JK-SP2***/JK-SS2*** YRS-370 J-SP1***/J-SS1*** YRS-440 J-SP2***/J-SS2*** YRS-330 Extraction tool is used to extract contacts improperly inserted in the housing. YC series YRM series YRF series YRK . YRK-EX series WC & JUC series JUK's Hand Tools - - - - - - - - - YC-440 Insertion tool allows contacts be inserted in the housing. This tool greatly increases efficiency especially when thin wires are used. Terminal in loose form model No. - J-BP/BS1*** - - KEJ-0.7 for plug, KEJ-0.4 for socket - DEJ-0.3 - - - - - LFO-1.0-250N - - - - - JUCS-FO - DEJ-0.3 - - - LFO-2.5-250N - - - - - JUCS-FO - - - MD-SP12** YRS-470 - - - - - - MEJ-06 - MD-SP22** YRS-460 - - - - - - MEJ-06 - - - - RA-BC12** EJ-RA - RF-BC22** RA-SC1290 RF-SC22** RPJ-SP2331 RPJ-SS2331 YRS-231 - - YRS-331 YRM-232 YRM-233 - YRM-230 - - - - - - - - - - EJ-RPJ - - SAA-21(T)-** - YC-141 - - - - LAA-21(T-)** - - SAA-50(T)-** - YC-182 - - - - LAA-50(T)-** - - SAA-51(T)-** - YC-142 - - - - LAA-51(T)-** - - SAB-51(T)-** - YC-142 - - - - LAB-51(T)-** - - SACH-003G-P0.2 YRS-1190 - - - - - - - - SAGH-002GU-P0.3 YRS-858 - - - - - - - - YRS-220 - - - - - - SAN-002T-0.8A SAN-002T-0.8K SBH-001T-P0.5 SBHL-002T-P0.5 SBHM-001T-P0.5 SBHS-002T-P0.5A SBHS-002T-P0.5A SBHSM-002T-P0.5 SBHT-002T-P0.5 SBN-001T-1.0 SCN-001T-1.0K SCN-001T-P1.0 SCS-41T-2.3 SCSH-002T-P0.2N - YRS-857 - YRS-852 - YRS-854 YRS-856 YRS-857 YRS-170 YRS-191 YC-670R - YC-670R - - - - - - WC-670 - - - - - EJ-PH BBH-001T-P0.5 - BBHM-001T-P0.5 - - - - - EJ-BHMR - - - - - - - EJ-BHS2 - - - - - - - EJ-BHS2 - - - - - - - EJ-BHSW - - - - - - - EJ-BHT - - - - - - - - - YC-170R YC-191R BBN-001T-1.0 BCN-001T-1.0K WC-191 BCN-001T-P1.0 - - - - - - - YRS-1350 - - - - - - - - - - CSJ-23 - - - Note: Contact JST for wire range. 3 4 Hand tools Crimping tools Crimping tools Hand tools Terminals and parts model number in alphabetical order SCSN-41T-P2.3 SCZH-002T-P0.5 SDACP-002T-M0.9 SDF-01T-1.0A for chain terminals Hand tools for loose piece terminals YRS series YC series YRM series YRF series - - - - - - - - - - YRS-492 YRS-1530 YRS-1531 Extraction and Insertion tools for loose piece terminals - - - - - - - - - - - - - - - - - - - SDN-21T-P1.5 - YC-600R - - - - BDN-21T-P1.5 SDY-01T-P1.6ASV - YC-525R - - - - BDY-01T-P1.6ASV - - - EJ-PH - - - - - - EJ-PH - SEH-002T-P0.6L - - - - - - - EJ-PH - SEH-003T-P0.6L - - - - - - - EJ-PH - - - - - YRK-1230 - - - - - - YRK-1220 - - EJ-JFAJ1100 - - - - - YRK-1210 - - EJ-JFAJ1100 - - - - YRF-882 YRK-8821 - EJ-JFAJ3 - - - - YRF-881 YRK-8811 - EJ-JFAJ3 - - - - YRF-880 YRK-8801 - EJ-JFAJ3 - - - - YRF-1070 YRK-1071 - EJ-JFAJ3 - SF1M-002T(GC)-M0.6A SF1F-21T(GC)-P0.6 SF1M-21T(GC)-M0.6A SF3F-002(*)-P2.0 SF3M-002(*)-M2.0N SF3F-01(*)-P2.0 BF3M-002(*)-M2.0N SF3F-41(*)-P2.0 SF3M-41(*)-M2.0N SF3F-71(*)-P2.0 SF3M-71(*)-M2.0N BEH-001T-P0.6 - - - SF1F-002T(GC)-P0.6 WC-260 - SLJ-1.4 - SF1M-01GC-M0.6A YC-260R LDF-01T-1.3AS - SEH-001T-P0.6L SF1F-01GC-P0.6 YRS-260 EJ-CSN LDF-01T-1.0A YC-045 SEH-001T-P0.6 Insertion tool Terminal in loose form model No. - SDF-01T-1.3AS Extraction tool WC & JUC series JUK's Hand Tools YRK . YRK-EX series BF3F-002(*)-P2.0 BF3M-002(*)-M2.0N BF3F-01(*)-P2.0 BF3M-01(*)-M2.0N LF3F-41(*)-P2.0 LF3M-41(*)-M2.0N BF3F-71(*)-P2.0 BF3M-71(*)-M2.0N - - SFO-41(T)-187N(-8) - YC-271 - - - - LFO-41(T)-187N - SFO-61(T)-250A - YC-270 - - - - LFO-61(T)-250A - - SFPS-61T-250 - YC-272 - - - - LFPS-61(T)-250 - - SFT-61T-250N - YC-510 - - - - LFT-61T-250N - - SGF-41(T)-4 - YC-055 - - - - LGF-41(T)-4 - - SGF-51(T)-5 - YC-065 - - - - - - SGHD-002GA-P0.2 SGM-51T-5 YRS-1590 - - YC-056 - - - - - - - - SGVH-002T-P0.2 YRS-1590 - - - - SHCM-A03T-P025 YRS-960 - - - - WC-SHCM-A03 SHF-001T-0.8BS YRS-122 - - - WC-122 SHF-002T-0.8BS YRS-300 - - - - YC-122R - - LGF-51(T)-5 LGF-51(T)-5A - - - - - - - - - - - - LGM-51T-5 BHF-001T-0.8BS EJ-SMP (Note1) - - EJ-SMP (Note1) - SHIF-01T-P0.5 - YC-985R - - - - - EJ-HILP - SHIF-21T-P0.5 - YC-995R - - - - - EJ-HILP - SHIM-01T-P0.5 - YC-985R - - - - - EJ-HILR - SHIM-21T-P0.5 - YC-995R - - - - - EJ-HILR YC-580R - - - - - - - - SHR-001T-P0.6 YRS-580 SHYVF-21T-M0.5 - SHYVF-41T-M0.5 - SIM-01(T)-110A - SIM-1.0-250D/N - SIM-2.5-250D/N - SIM-41(T)-110B - SIM-51(T)-250N - - - - - - - - - - - - - - - JUCS-IM - - - - JUCS-IM YC-067 - - - - YC-321 - - - - YC-054 BHR-001T-P0.6 - EJ-BNI - EJ-BNI LIM-01(T)-110A - - - - - - - - - - - - - LIM-41(T)-110B - - LIM-51(T)-250N - - Note 1: Please use EJ-SMP as an extraction tool when using the combination with SM connector 18-circuit housing. 2: Contact JST for wire range. 5 6 Hand tools Crimping tools Crimping tools Hand tools Terminals and parts model number in alphabetical order for chain terminals YRS series Hand tools for loose piece terminals Extraction and Insertion tools for loose piece terminals YC series YRM series YRF series YRK . YRK-EX series WC & JUC series JUK's Hand Tools Terminal in loose form model No. Extraction tool Insertion tool SIN-001T-1.2 YRS-034 - - - - - - - - SIN-002T-1.0S YRS-035 - - - - - - - - - - - - - - - - SIN-01T-1.2 SIN-01T-1.8 SIN-01T-1.8N SIN-21T-1.8 - YC-340R LIN-01T-1.2 LIN-01T-1.8 - YC-032 - - - - - YC-350 - - - - LIN-21T-1.8 - - - - - - LIN-21T-1.8S - - - YC-570 LIN-01T-1.8N SIN-21T-1.8S - SIN-61T-2.6S - YC-560 - - - - LIN-61T-2.6S - SIN-81T-3.6S - YC-940 - - - - LIN-81T-3.6S - - SIN-91T-4.7S - - - - YRK-1630 - - - - YRS-8851 - - - YRK-8851 - - EJ-JFAJ2N - YRS-8861 - - - YRK-8861 - - EJ-JFAJ2N - - - - YRF-1120 YRK-1120 - EJ-JFAJ2N - SJ3F-002GF-P1.8 - - - YRF-882 - - - - - SJ3F-01GF-P1.8 - - - YRF-881 - - - - - SJ3F-41GF-P1.8 - - - YRF-880 - - - - - SJ4F-71GF-M3.0 - - - YRF-1130 - - SJ4F-81GF-M3.0 - - - YRF-1370 - - SJ2F-002GF-P1.0 SJ2M-002GF-M1.0N YC-571 SJ2F-01GF-P1.0 SJ2M-01GF-M1.0N SJ2M-01GF-M1.0S SJ2F-21GF-P1.0 SJ2M-21GF-M1.0N SJ5F-71GF-M6.5 SJ5M-71GF-M6.5 SJ5F-81GF-M6.5 SJ5M-81GF-M6.5 SJ5F-91GF-M6.5 SJ5M-91GF-M6.5 SJFPS-81T-M1.0 - - - YRF-888 - - - - - YRF-889 - - - - - - - - LJ2F-21GF-P1.0 LJ2M-21GF-M1.0N BJ4F-71GF-M3.0 EJ-JFAJ4 - BJ4F-81GF-M3.0 EJ-JFAJ4 - EJ-JFAJ5 - EJ-JFAJ5 - EJ-JFAJ5 - BJ5F-71GF-M6.5 BJ5M-71GF-M6.5 LJ5F-81GF-M6.5 LJ5M-81GF-M6.5 LJ5F-91GF-M6.5 LJ5M-91GF-M6.5 - - - YRF-1610 - - - - SJN-001PT-0.9 YRS-1181 - - - - - - - - SJN-002PT-0.9 YRS-036 - - - - - - - - - - SJWPSR-21T-P1.0 SJWPST-21T-M1.0N - WC-310 EJ-JWPS-RT LLC-21T-2.0 - SLC-21T-2.0 - - - - SLC-001T-P2.0 - - - - - - - EJ-LCL - SLC-02T-P2.0 - - - - - - - EJ-LCL - SLF-01T-P1.3E YC-310 - - - - YC-202 YRM-201 - - WC-202 LLF/M-01T-P1.3E LEJ-13 - YC-203 - - - WC-203 LLF/M-41T-P1.3E LEJ-13 SMF-01T-1.0 - YC-081 - - - - LMF-01T-1.0 - - SMF-01T-1.3 - YC-082 - - - - LMF-01T-1.3 - - - - - - - - YC-580R - - - BMR-001T-0.6 - - - - - LOM-21(T)-187 - - - - - - - - - - SLM-01T-P1.3E SLF-41T-P1.3E SLM-41T-P1.3E SMM-003T-P0.5 YRS-800 SMR-001T-0.6 YRS-580 - SOM-21(T)-187 - YC-680 SOM-51(T)-250 - YC-066 SOTZP-002GD-P0.18 - - WC-800 WC-066 LOM-51(T)-250 - - EJ-OTZS LIT-2013 - - Note: Contact JST for wire range. 7 8 Hand tools Crimping tools Crimping tools Hand tools Terminals and parts model number in alphabetical order for chain terminals YRS series Hand tools for loose piece terminals YC series YC-610R Extraction and Insertion tools for loose piece terminals Extraction tool Terminal in loose form model No. Insertion tool YRM series YRF series YRK . YRK-EX series WC & JUC series JUK's Hand Tools - - - - BPA-001T-P0.5 EJ-PH - - - - - BPAL-001T-P0.5 EJ-PAL - - SPA-001T-P0.5 - SPAL-001T-P0.5 - SPAL-002T-P0.5 YRS-1340 - - - - SPB-1.0-250N-S - - - - - JUCS-PB - - - SPB-2.5-250N-S - - - - - JUCS-PB - - - SPBD-001T-P0.5 - YC-610R - - - - - - - SPBD-002T-P0.5 - YC-611R - - - - - - - SPF-01T-2.5C - YC-043R - - - - - - - - - - YC-611R YC-610R YC-611R SPH-001T-P0.5L YRS-245 - SPH-002T-P0.5L YRS-241 - - SPH-002T-P0.5S YRS-240 - YRM-240 SPH-004T-P0.5S YRS-243 - - - - - - - WC-610 - WC-620 SPHD-001T-P0.5 - YC-610R YC-611R - - WC-240 - LPF-01T-2.5C - - BPH-002T-P0.5S - EJ-PAL - BPHD-001T-P0.5 - - - EJ-PH - EJ-PH - EJ-PH - EJ-PHD-RB - SPHD-002T-P0.5 YRS-620 - YRM-620 SPID-001T-P0.5 YRS-1620 - - - - - - SPLI-002T-P0.5 YRS-1410 - - - - - - SPND-001T-C0.5 YRS-1091 - - - - - - EJ-PND - SPND-002T-C0.5 YRS-1090 - - - - - - EJ-PND - - - - - - - - - - - - - - - - - WC-740 LPS-01T-110 - - - - - WC-730 LPS-01T-187(-8) SPNI-001T-P0.5 - SPNI-002T-P0.5 YRS-1340 SPS-01T-110 - YC-610R YC-611R - YC-740 YC-730 BPHD-002T-P0.5 - - SPS-01T-187(-8) - SPS-21T-205(-5) - YC-760 - - - SPS-21T-250 - YC-780 - - - WC-780 SPS-21T-250S - YC-780 - - - WC-780 SPS-21T-250R - YC-780 - - - SPS-41T-110 - - - - WC-750 LPS-41T-110 SPS-51T-187(-8) - - - - WC-710 LPS-51T-187(-8) SPS-51T-205 - - - - SPS-61T-250 - YC-720 - - - SPS-61T-250S - YC-720 - - SPS-61T-250R - YC-721 - - SPS-91T-250 - - - SPS-91T-250S - - - SPS-91T-250R - - - YRF-791 SPSI-001T-M1.1 - YC-335R - - SPSM-001T-M1.1 - YC-335R - - SPSI-41T-M1.1 - YC-225R - - - YC-226R SPSM-41T-M1.1 YC-731 YC-750 YC-751 YC-710 YC-711 YC-770 YC-771 - - - - EJ-PS187 LPS-21T-205(-5) LPS-21T-250 - EJ-PHD-RB EJ-PID - - - EJ-PS250 - - LPS-21T-250S EJ-PS250 - LPS-21T-250R EJ-PS250 - - EJ-PS187 - - - LPS-51T-205 LPS-61T-250 EJ-PS250 - - - LPS-61T-250S EJ-PS250 - - - LPS-61T-250R EJ-PS250 - YRF-790 - - BPS-91T-250 EJ-PS250 - YRF-790 - - BPS-91T-250S EJ-PS250 - - - BPS-91T-250R EJ-PS250 - - - - EJ-PSIP - - - - EJ-PSIR - - - - EJ-PSIP - WC-720 - - - - - - - EJ-PSIR - SPUD-001T-P0.5 YRS-1320 - - - - - - EJ-PUD - SPUD-002T-P0.5 YRS-1520 - - - - - - EJ-PUD - Note: Contact JST for wire range. 9 10 Hand tools Crimping tools Crimping tools Hand tools Terminals and parts model number in alphabetical order for chain terminals YRS series Hand tools for loose piece terminals Extraction and Insertion tools for loose piece terminals YC series YRM series YRF series YRK . YRK-EX series WC & JUC series JUK's Hand Tools - Extraction tool Terminal in loose form model No. Insertion tool SPXA-001T-P0.6 - - - - - - SRA-20(T)-** - YC-181 - - - - LRA-20(T)-** - - SRA-21(T)-** - YC-141 - - - - LRA-21(T)-** - - SRA-50(T)-** - YC-182 - - - - LRA-50(T)-** - - SRA-51(T)-** - YC-142 SRB-1.0-( ) - SRB-2.5-( ) - SRB-51(T)-** - YC-142 SRC-01(T)-** - SRC-50(T)-** SRC-51(T)-** SRF-51(T)-** SRFCP-002GG-M0.9 EJ-PXA - - - - - LRA-51(T)-** - - - - - - JUCS-RB/RT - - - - - - - JUCS-RB/RT - - - - - - - LRB-51(T)-** - - YC-033 - - - - LRC-01(T)-** - - - YC-183 - - - - LRC-50(T)-** - - - YC-142 - - - - LRC-51(T)-** - - - YC-142 - - - - LRF-51(T)-** - - - - - - - - EJ-RFC-P - - - YRS-1530 YRS-1531 SRFF-01GG-S0.9 - - - - - - EJ-RFC-R SRFF-61GG-S0.9 - - - YRF-1450 - - EJ-RFC-R - SRFM-01GG-S0.9 - - - - - - EJ-RPZ - SRFM-61GG-S0.9 - - - YRF-1450 - - EJ-RPZ - - - - - - - - SRICM-61GG-S0.6 SRICM-61T-S0.6 - YC-840R SRT-1.0-( ) - - - - - JUCS-RB/RT - - - SRT-2.5-( ) - - - - - JUCS-RB/RT - - - SRT-51T-** - - - - - - - YC-143R LRT-51T-** SRWF-01GG-M0.6 SRWF-01T-M0.6 - - - - - - - EJ-RPZ - - - - - - - - EJ-RPZ - - - - - EJ-RPZ - - - - - - - EJ-SFH - EJ-SFH SRWM-01GG-S0.6 SRWF-21GG-M0.6 SRWM-21GG-S0.6 BRWF-61GG-M0.6 SRWF-61GG-M0.6 SRWF-61T-M0.6 - YC-840R BRWM-61GG-S0.6 SRWM-61GG-S0.6 SSFH-001T-P0.5 YRS-1580 YRS-1581 SSFH-002T-P0.5 YRS-1490 - - - - - - SSH-003T-P0.2-H YRS-859 - - - - WC-SH2832 - - - SSH-003GA-P0.2 YRS-859 - - - - WC-SH2832 - - - SSHJ-003T-P0.2 YRS-859 - - - - - - - - SSHL-002T-P0.2 YRS-1590 - - - - WC-GH2630 - - - SSHL-003T-P0.2 YRS-859 - - - - WC-SH2832 - - - SSHL-003GA1-P0.2 YRS-859 - - - - WC-SH2832 - - - - SSF-01T-P1.4 - YC-500 - - - - YC-550 - - - STI-01(T)-110N - YC-041 - - - - - STI-1.0-250D/N - - - - - JUCS-TI - - - STI-2.5-250D/N - - - - - JUCS-TI - - - STI-41(T)-110N - YC-063 - - - - LTI-41(T)-110N - - STI-51(T)-250N - YC-322 - - - - LTI-51(T)-250N - - STO-01(T)-110N(-8) - YC-041 - - - - LTO-01(T)-110N(-8) - - STO-01(T)-187N(-8) - YC-042 - - - - LTO-01(T)-187N(-8) - - SSM-01T-P1.4 SSF-21T-P1.4 SSM-21T-P1.4 WC-550 - BSF/M-01T-P1.4 SLJ-1.4 BSF/M-21T-P1.4 SLJ-1.4 - LTI-01(T)-110N ITBL-08V - Note: Contact JST for wire range. 11 12 Hand tools Crimping tools Crimping tools Hand tools Terminals and parts model number in alphabetical order for chain terminals YRS series Hand tools for loose piece terminals YC series Extraction and Insertion tools for loose piece terminals YRM series YRF series YRK . YRK-EX series WC & JUC series JUK's Hand Tools Extraction tool Terminal in loose form model No. Insertion tool STO-0.25-110N - YC-810 - - - - - - - STO-0.5-110N - YC-820 - - - JUCS-05110 - - - STO-1.0-110N - - - - - JUCS-2.8/4.8 - - - STO-1.0-187N - - - - - JUCS-2.8/4.8 - - - STO-1.0-250N - - - - - JUCS-6.3 - - - STO-2.5-250N - - - - JUCS-6.3 STO-21(T)-205N(-5) - YC-053 - - - - LTO-21(T)-205N STO-21(T)-250N - YC-102 - - - - STO-41(T)-110N(-8) - YC-062 - - - - STO-41(T)-187N(-8) - YC-051 - - - STO-41T-187S - YC-064 - - STO-61(T)-250N - YC-047 - - STO-81(T)-250N - YC-280 - STS-002GG-P0.6 STSD-002GG-P0.6 - YRS-1360 - YRF-280 - - - - - LTO-21(T)-250N - - LTO-41(T)-110N(-8) - - - LTO-41(T)-187N(-8) - - - - LTO-41T-187S - - LTO-61(T)-250N - - - - LTO-81(T)-250N - - - - - - - EJ-187S - EJ-TSD - SVA-41T-P1.1 - YC-450 - - - - BVA-41T-P1.1 - - SVF-01T-1.5A - YC-044 - - - - LVF-01T-1.5A - - SVF-01T-1.5N - YC-151 - - - - LVF-01T-1.5N EJ-SV - SVF-01T-2.36N - YC-152 - - - - LVF-01T-2.36N EJ-LV - SVF-42T-P2.0 - YC-592 - - - WC-592 BVF-42T-P2.0 VLJ-20 - SVM-42T-P2.0 - YC-593 - - - WC-592 BVM-42T-P2.0 VLJ-20 - - YC-590 - YRF-590 - WC-590 BVF/M-61T-P2.0 VLJ-20 - - YRF-591 - WC-591 BVF/M-81T-P2.0 VLJ-20 - - - WC-160 BVH-21T-(P)1.1 EJ-NV - - - WC-930 BVH-41T-P1.1 EJ-NV - SVF-61T-P0.2 SVM-61T-P0.2 SVF-81T-P0.2 SVM-81T-P0.2 - - YC-160R SVH-21T-P1.1 SVH-41T-P1.1 SVSF-61T-S2.0 SVSM-61T-S2.0 SVSF-81T-S2.0 SVSM-81T-S2.0 - - YRM-160 YC-161R - YC-164R YRM-164 YC-930R YC-931R - - - - YRF-590 - - - VLJ-20 - - - - YRF-591 - - - VLJ-20 - SVT-41T-P1.1 - YC-630 - - - - BVT-41T-P1.1 EJ-VT - SVU-21T-P0.6 - YC-990R - - - - BVU-21T-P0.6 EJ-VU - SVYF-61T-P0.5A - - - - - - SWPJT-21T-P0.5 - - - - - - - EJ-WPJ - SWPJT-21T-P0.5A - - - - - - - EJ-WPJ - SWPJR-21T-M0.5 - - - - - - - EJ-WPJ SWPKP-21T-0.6 - - - YRF-1051 - - BWPKP-21T-0.6 - - SWPKR-21T-0.6 - - - YRF-1050 - - BWPKR-21T-0.6 - - - - - - WC-JWPF WC-700M SWPR-001T-P025 SWPT-001T-P025 YRS-980 YRF-536 SXA-01T-P0.6 YRS-701 YC-701R - - - SXA-001T-P0.6 YRS-692 YC-692R - - - SXA-001T-P0.6L YRS-691 - - - - - - WC-691 - - EJ-JWPF BXA-01T-P0.6 EJ-XAG, EJ-XMP BXA-001T-P0.6 EJ-XMP, EJ-XMR - - - - IT-XA - - Note: Contact JST for wire range. 13 14 Hand tools Crimping tools Crimping tools Hand tools Terminals and parts model number in alphabetical order for chain terminals YRS series Hand tools for loose piece terminals YC series Extraction and Insertion tools for loose piece terminals YRM series YRF series YRK . YRK-EX series WC & JUC series JUK's Hand Tools WC-700M Extraction tool Terminal in loose form model No. Insertion tool SXAM-01T-P0.6 YRS-701 YC-701R - - - BXAM-01T-P0.6 EJ-XAW - SXAM-001T-P0.6 YRS-692 YC-692R - - - - BXAM-001T-P0.6 EJ-XAW - SXF-01T-P0.7 - YC-251 - - - - BXF-01T-(P)0.7 LEJ-7 - SXF-41T-P0.7 - YC-252 - - - - BXF-41T-(P)0.7 LEJ-7 - - - - BXH-001T-P0.6 XJ-06 - - - - - - - XJ-06 - - - - - - - XJ-06 - - SXH-001T-P0.6 SXH-001T-P0.6N YRS-110 YC-110R YC-111R - WC-110 SXH-002T-P0.6 YRS-480 SXM-01T-P0.6 YRS-701 YC-701R - - - - BXM-01T-P0.6 EJ-XAG, EJ-XMP SXM-001T-P0.6 YRS-692 YC-692R - - - - BXM-001T-P0.6 EJ-XMP, EJ-XMR SXNI-001T-P0.6 YRS-1380 - - - - - - - SXNI-003T-P0.6 YRS-1390 - - - - - - - - SYF-001T-P0.6 YRS-125 - - - - - - - - SYF-01T-P0.5A SYM-01T-P0.5A SYF-41T-P0.5A SYM-41T-P0.5A SYF-61T-P0.5A SYM-001T-P0.6 - YC-520 - - - WC-520 - YC-530 - - - WC-530 - - YRF-536 - - YRS-121 BYF-01T-P0.5A BYM-01T-P0.5A BYF-41T-P0.5A BYM-41T-P0.5A - WC-121 IT-XA - YLJ-0.5 - YLJ-0.5 - - - - YC-121R - - - BYM-001T-P0.6 SMJ-06 - SYM-01T-P0.7 - YC-251 - - - - BYM-01T-(P)0.7 LEJ-7 - SYM-41T-P0.7 - YC-252 - - - - BYM-41T-(P)0.7 LEJ-7 SZE-002T-P0.3 YRS-1460 - - - - - SZE-003T-P0.3 YRS-1330 - - - - - SZF-01T-P0.7 SZM-01T-P0.7 SZF-41T-P0.7 SZM-41T-P0.7 - YC-390R - - - - - YC-380R - - - - - - - - - - - BZF-01T-(P)07 BZM-01T-(P)0.7 BZF-41T-(P)07 BZM-41T-(P)0.7 ZLJ-0.7S - ZLJ-0.7S - SZH-002T-P0.5 YRS-491 - - - - WC-491 - - SZH-003T-P0.5 YRS-490 - - - - WC-490 - - - - SZN-002T-P0.7K YRS-541 - - - - - - - - SZN-003T-P0.7K YRS-540 - - - - - - - - SZND-002T-P0.5 YRS-1710 - - - - - - - - SZPD-002T-P0.3 YRS-1460 - - - - - - - - Note : Contact JST for wire range. 15 16 Crimping tools Crimping tools YRK series hand crimping tools suitable for mass-production Dies replacement type hand crimping tools * Crimping work, such as setting contacts to hand tools etc., is facilitated by using a strip contact to improve the productivity. * A light operation enables to terminate the contact correctly, by adopting straight-ahead crimping. YRK-EX * High reliability of crimping is provided by choosing the crimper and anvil suitable for the wire specification. * A structure, that the carrier of contact doesn't fly off, has been adopted to this tool. * The crimping die can be easily exchanged by only insertion and extraction of pin. * Common handle and crimping dies can be stored in One case and it is easy to carry. Patent pending Hand Crimping Tools YRK Standard type * When exchanging the crimper, the crimping suitable for the wire specification can be conducted. * Anvil is fixed to tool. Dimensions: 75(W)x314(L)x25(D) mm Weight: Approx. 800 g (When assembling dies) *1 Contact Model No. Nominal Receptacle Tab Hand crimp tools Model No. of crimper Crimper *1 Contact Model No. Applicable wire size Marking AWG Insulation O.D. (mm) LA #22 1.58 LB KV0.75 1.90 LC #20 1.76 Series Nominal Receptacle Tab Crimper Model No. Applicable wire size Insulation O.D. Die mark AWG (mm) LA / LB J1000 Type II L SF1F-21(*)-P0.6 SF1M-21(*)-M0.6A J2000 M L SJ2F-002GF-P1.0 SJ2F-01GF-P1.0 SJ2F-21GF-P1.0 SJ2M-002GF-M1.0N SJ2M-01GF-M1.0N SJ2M-21GF-M1.0N YRK-8851 YRK-8861 YRK-1120 J1000 Type II L SF1F-21(*)-P0.6 SF3F-002(*)-P2.0 SF3M- 002(*)-M2.0N SF3M-01(*)-M2.0N 1.20 D KV0.75 1.90 A #28 1.20 B #24 1.43 A #24 1.43 B #20 1.53 *2 A #22 1.58 B #20 1.76 A #28 1.20 B #24 1.43 C #26 1.30 D #24 1.11 A #24 1.43 B #20 1.76 C #22 1.58 D #20 2.56 A #20 1.76 B #16 2.35 C #18 2.03 SB #24 1.43 MA #24 1.43 MB #20 1.53 *2 LA #22 1.58 LB #20 1.76 S SJ2F-002GF-P1.0 SJ2M-002GF-M1.0N J2SA / B MA / MB J2000 M SJ2F-01GF-P1.0 L SJ2F-21GF-P1.0 SJ2M-01GF-M1.0N J2MA / B LA / LB SA #28 1.20 SB #24 1.43 SC #26 1.30 SD #24 1.11 MA #24 1.43 MB #20 1.76 MC #22 1.58 MD #20 2.56 LA #20 1.76 SJ2M-21GF-M1.0N J2LA / B LB #16 2.35 S SF3F-002(*)-P2.0 SF3M-002(*)-M2.0N 2L SF3F-71(*)-P2.0 SF3M-71(*)-M2.0N YRK-1071 Note: 1. J1000 Finish(*): T ...... Tin-plated GC ... Gold-plated 2. J300 Finish(*): GF... Nickel-undercoated, 0.38m selective gold-plated GI... Nickel-undercoated, 0.76m selective gold-plated T ...... Tin-plated 3. The wear of parts is caused by using hand tool repeatedly. Measure the crimping height daily and conduct periodical inspection of the wearing parts, such as ratchet, pin and so on. 17 2LA / 2LB M SF3F-01(*)-P2.0 SF3M-01(*)-M2.0N J2ML Purple J2LL Orange J3SL Yellow J3ML Green J3LL Red J32LL Blue Handle unit Upper pin Lower pin Case J3LA / B 2.03 LD #18 2.83 2LA #16 3.10 D #18 2.83 3.30 A #16 3.10 B #14 3.30 *1... Crimper is either the pair of A and B or the pair of C and D. *2... When using wire type UL 2517. White J3MC / D #18 #14 J2SL Common parts J3MA / B LC 2LB Yellow green J3SC / D YRK-8801 LC / LD J1LL J3SA / B LA / LB SF3M-41(*)-M2.0N Color mark J1LC / D J300 SF3F-41(*)-P2.0 1.58 #28 MC / MD L 2.03 #22 SA YRK-8811 J300 #18 2.03 MA / MB SF3F-01(*)-P2.0 B C #18 SC / SD M 1.76 LD SA / SB YRK-8821 #20 SF1M-21(*)-M0.6A SA / SB S A Anvil J1LA / B YRK-1210 LC / LD S Dimensions: 376(W)x295(L)x73(D) mm Contact and Applicable dies Contact and Applicable dies Series Dimensions: 75(W)x314(L)x25(D) mm Weight: Approx. 800 g (When assembling dies) L SF3F-41(*)-P2.0 SF3M-41(*)-M2.0N J3LC / D 2L SF3F-71(*)-P2.0 SF3M-71(*)-M2.0N J32LA / B Note: 1. J1000 Finish(*): T ...... Tin-plated GC ... Gold-plated 2. J300 Finish(*): GF... Nickel-undercoated, 0.38m selective gold-plated GI... Nickel-undercoated, 0.76m selective gold-plated T ...... Tin-plated 3. The wear of parts is caused by using hand tool repeatedly. Measure the crimping height daily and conduct periodical inspection of the wearing parts, such as ratchet, pin and so on. *1... Crimper is either the pair of A and B or the pair of C and D. *2... When using wire type UL 2517. 18