YRS-240 - JST - Datasheet.Live

MKS-SC

Strip-crimp applicator

for side feeding terminals

MK-L

Crimping applicator

for end-feeding terminals

MKS-L

Crimping applicator

for side-feeding terminals

MKF-L

Crimping applicator

for end-feeding flag terminals

APPLICATION TOOLING

Crimping tools and machines

The arrow mark indicates the press that is applicable to the applicator.

Semi-automatic crimping machines (presses)

contact a wire to a chain terminal each time a

footswitch is pressed.

Semi-automatic press

AP-K2N

• Dimensions:

(W×L×H)280×480×505 mm

• Weight:

Approx. 90 kg(198 lb)

• Power source:

100 VAC, Single-phase 50/60 Hz

• Pressure output:

14.7 kN[1,500 kg(3307 lb)]

• Dies:

Applicator replacement

JK-SP2***/JK-SS2*** YRS-370 – – – – – – KEJ-0.7 for plug, KEJ-0.4 for socket –

J-SP1***/J-SS1*** YRS-440 YC-440 – – – – J-BP/BS1*** DEJ-0.3 –

J-SP2***/J-SS2*** YRS-330 – – – – – – DEJ-0.3 –

LFO-1.0-250N ––––– JUCS-FO – – –

LFO-2.5-250N ––––– JUCS-FO – – –

MD-SP12** YRS-470 – – – – – – MEJ-06 –

MD-SP22** YRS-460 – – – – – – MEJ-06 –

RA-SC1290 YRS-231 – YRM-232 –– –RA-BC12** EJ-RA –

YRM-233

RF-SC22** ––YRM-230 – – – RF-BC22** – –

RPJ-SP2331 YRS-331 – – – – – – EJ-RPJ –

RPJ-SS2331

SAA-21(T)-** –YC-141 – – – – LAA-21(T-)** – –

SAA-50(T)-** –YC-182 – – – – LAA-50(T)-** – –

SAA-51(T)-** –YC-142 – – – – LAA-51(T)-** – –

SAB-51(T)-** –YC-142 – – – – LAB-51(T)-** – –

SACH-003G-P0.2 YRS-1190 – – – – – – – –

SAGH-002GU-P0.3 YRS-858 – – – – – – – –

SAN-002T-0.8A YRS-220 – – – – – – EJ-PH –

SAN-002T-0.8K

SBH-001T-P0.5 –YC-670R – – – WC-670 BBH-001T-P0.5 – –

SBHL-002T-P0.5 YRS-857 – – – – – – – –

SBHM-001T-P0.5 –YC-670R – – – – BBHM-001T-P0.5 EJ-BHMR –

SBHS-002T-P0.5A YRS-852 – – – – – – EJ-BHS2 –

SBHS-002T-P0.5A –––––––EJ-BHS2 –

SBHSM-002T-P0.5 YRS-854 – – – – – – EJ-BHSW –

SBHT-002T-P0.5 YRS-856 ––––––EJ-BHT –

YRS-857

SBN-001T-1.0 YRS-170 YC-170R –––– – BBN-001T-1.0 – –

SCN-001T-1.0K YRS-191 YC-191R – – – WC-191 BCN-001T-1.0K ––

SCN-001T-P1.0 BCN-001T-P1.0

SCS-41T-2.3 –––––––CSJ-23 –

SCSH-002T-P0.2N YRS-1350 – – – – – – – –

Hand tools

Crimping tools

Extraction tool

Terminals and parts model

number in alphabetical order

Insertion tool

Hand tools Hand tools

for chain terminals for loose piece terminals for loose piece terminals Extraction and Insertion tools

YRS

series

Insertion tool allows contacts be inserted

in the housing.

This tool greatly increases efficiency especially

when thin wires are used.

Extraction tool is used to extract

contacts improperly inserted in the housing.

Note:(1) These tools are for prototype tooling or repair.

(2) YC tool has two crimping sections (A and B). YRS tool has also two crimping sections by inverting upper dies.

Be sure to check applicable wires before use. Since the dies are fixed, the crimping height cannot be adjusted. Therefore, some of the

applicable wires described in this catalog may not be crimped properly.

Before use, check for proper crimping (such as tensile strength, terminal/contact deformation).

(3) These tools are not applicable to 2-wire crimping.

(4) When hand crimping board-in terminals (SAN, SCN, SDN, SGN, SIN, SJN, SZN), care should be taken not to contaminate the solder tails of

the terminals, as with greasy or oily fingers. If a solder problem arises, some cleaning of the tips of the terminal is advisable.

(5) WC and JUC hand tools are provided by J.S.T.(U.K.) LTD. and contact them about the details of these hand tools.

Dimensions:

(W×L) 59×224 mm

series

Dimensions:

(W×L) 70×296 mm

YRM

series

Dimensions:

(W×L) 59×224 mm

YRF

series

Dimensions:

(W×L) 70×295 mm

80×305 mm

YRS series YC series YRM series YRF series WC & JUC series

JUK's Hand Tools Terminal in loose form

model No.

Crimping tools

It is the manual tool that is convenience to terminate very small quantity of contacts for prototype or maintenance.

It is composed of two crimping dies for the conductor and insulation, and can be crimp easily.

YRK and YRK-EX can be used for mass-production.

YRK . YRK-EX series

Note: Contact JST for wire range.

YRK

series

Dimensions:

(W×L×D)

75×314×25 mm

Dimensions:

(W×L×D)

75×314×25 mm

YRK-EX

series

SCSN-41T-P2.3 –––––––EJ-CSN –

SCZH-002T-P0.5 YRS-492 – – – – – – – –

SDACP-002T-M0.9 YRS-1530 –––– – – – –

YRS-1531

SDF-01T-1.0A –YC-045 – – – – LDF-01T-1.0A ––

SDF-01T-1.3AS LDF-01T-1.3AS

SDN-21T-P1.5 –YC-600R – – – – BDN-21T-P1.5 – –

SDY-01T-P1.6ASV –YC-525R – – – – BDY-01T-P1.6ASV SLJ-1.4 –

SEH-001T-P0.6 YRS-260 YC-260R – – – WC-260 BEH-001T-P0.6 EJ-PH –

SEH-001T-P0.6L –––––––EJ-PH –

SEH-002T-P0.6L –––––––EJ-PH –

SEH-003T-P0.6L –––––––EJ-PH –

SF1F-01GC-P0.6 ––––YRK-1230 – – – –

SF1M-01GC-M0.6A

SF1F-002T(GC)-P0.6 ––––YRK-1220 – – EJ-JFAJ1100 –

SF1M-002T(GC)-M0.6A

SF1F-21T(GC)-P0.6 ––––YRK-1210 – – EJ-JFAJ1100 –

SF1M-21T(GC)-M0.6A

SF3F-002(*)-P2.0 –––YRF-882 YRK-8821 – BF3F-002(*)-P2.0 EJ-JFAJ3 –

SF3M-002(*)-M2.0N BF3M-002(*)-M2.0N

SF3F-01(*)-P2.0 –––YRF-881 YRK-8811 – BF3F-01(*)-P2.0 EJ-JFAJ3 –

BF3M-002(*)-M2.0N BF3M-01(*)-M2.0N

SF3F-41(*)-P2.0 –––YRF-880 YRK-8801 – LF3F-41(*)-P2.0 EJ-JFAJ3 –

SF3M-41(*)-M2.0N LF3M-41(*)-M2.0N

SF3F-71(*)-P2.0 –––YRF-1070 YRK-1071 – BF3F-71(*)-P2.0 EJ-JFAJ3 –

SF3M-71(*)-M2.0N BF3M-71(*)-M2.0N

SFO-41(T)-187N(-8) –YC-271 – – – – LFO-41(T)-187N – –

SFO-61(T)-250A –YC-270 – – – – LFO-61(T)-250A – –

SFPS-61T-250 –YC-272 – – – – LFPS-61(T)-250 – –

SFT-61T-250N –YC-510 – – – – LFT-61T-250N – –

SGF-41(T)-4 –YC-055 – – – – LGF-41(T)-4 – –

SGF-51(T)-5 –YC-065 – – – – LGF-51(T)-5 ––

LGF-51(T)-5A

SGHD-002GA-P0.2 YRS-1590 – – – – – – – –

SGM-51T-5 –YC-056 – – – – LGM-51T-5 – –

SGVH-002T-P0.2 YRS-1590 – – – – – – – –

SHCM-A03T-P025 YRS-960 – – – – WC-SHCM-A03 – – –

SHF-001T-0.8BS YRS-122 YC-122R – – – WC-122 BHF-001T-0.8BS EJ-SMP (Note1) –

SHF-002T-0.8BS YRS-300 – – – – – – EJ-SMP (Note1) –

SHIF-01T-P0.5 –YC-985R – – – – – EJ-HILP –

SHIF-21T-P0.5 –YC-995R – – – – – EJ-HILP –

SHIM-01T-P0.5 –YC-985R – – – – – EJ-HILR –

SHIM-21T-P0.5 –YC-995R – – – – – EJ-HILR –

SHR-001T-P0.6 YRS-580 YC-580R – – – – BHR-001T-P0.6 – –

SHYVF-21T-M0.5 –––––––EJ-BNI –

SHYVF-41T-M0.5 –––––––EJ-BNI –

SIM-01(T)-110A –YC-054 – – – – LIM-01(T)-110A – –

SIM-1.0-250D/N ––––– JUCS-IM – – –

SIM-2.5-250D/N ––––– JUCS-IM – – –

SIM-41(T)-110B –YC-067 – – – – LIM-41(T)-110B – –

SIM-51(T)-250N –YC-321 – – – – LIM-51(T)-250N – –

Extraction tool

Terminals and parts model

number in alphabetical order

Insertion tool

Hand tools Hand tools

for chain terminals for loose piece terminals for loose piece terminals Extraction and Insertion tools

YRS series YC series YRM series YRF series WC & JUC series

JUK's Hand Tools Terminal in loose form

model No.

YRK . YRK-EX series

Note 1: Please use EJ-SMP as an extraction tool when using the combination with SM connector 18-circuit housing.

2: Contact JST for wire range.

Hand tools

Crimping tools

SIN-001T-1.2 YRS-034 – – – – – – – –

SIN-002T-1.0S YRS-035 – – – – – – – –

SIN-01T-1.2 –YC-340R – – – – LIN-01T-1.2 – –

SIN-01T-1.8 –YC-032 – – – – LIN-01T-1.8 ––

SIN-01T-1.8N LIN-01T-1.8N

SIN-21T-1.8 –YC-350 – – – – LIN-21T-1.8 – –

SIN-21T-1.8S –YC-570 ––––LIN-21T-1.8S – –

YC-571

SIN-61T-2.6S –YC-560 – – – – LIN-61T-2.6S – –

SIN-81T-3.6S –YC-940 – – – – LIN-81T-3.6S – –

SIN-91T-4.7S ––––YRK-1630 – – – –

SJ2F-002GF-P1.0 YRS-8851 –––

YRK-8851 ––EJ-JFAJ2N –

SJ2M-002GF-M1.0N

SJ2F-01GF-P1.0

SJ2M-01GF-M1.0N YRS-8861 – – – YRK-8861 – – EJ-JFAJ2N –

SJ2M-01GF-M1.0S

SJ2F-21GF-P1.0 –––YRF-1120 YRK-1120 –LJ2F-21GF-P1.0 EJ-JFAJ2N –

SJ2M-21GF-M1.0N LJ2M-21GF-M1.0N

SJ3F-002GF-P1.8 –––YRF-882 – – – – –

SJ3F-01GF-P1.8 –––YRF-881 – – – – –

SJ3F-41GF-P1.8 –––YRF-880 – – – – –

SJ4F-71GF-M3.0 –––YRF-1130 – – BJ4F-71GF-M3.0 EJ-JFAJ4 –

SJ4F-81GF-M3.0 –––YRF-1370 – – BJ4F-81GF-M3.0 EJ-JFAJ4 –

SJ5F-71GF-M6.5 –––YRF-888 – – BJ5F-71GF-M6.5 EJ-JFAJ5 –

SJ5M-71GF-M6.5 BJ5M-71GF-M6.5

SJ5F-81GF-M6.5 –––YRF-889 – – LJ5F-81GF-M6.5 EJ-JFAJ5 –

SJ5M-81GF-M6.5 LJ5M-81GF-M6.5

SJ5F-91GF-M6.5 ––––– –

LJ5F-91GF-M6.5 EJ-JFAJ5 –

SJ5M-91GF-M6.5 LJ5M-91GF-M6.5

SJFPS-81T-M1.0 –––YRF-1610 –– – –

SJN-001PT-0.9 YRS-1181 – – – – – – – –

SJN-002PT-0.9 YRS-036 – – – – –

SJWPSR-21T-P1.0 –––––––EJ-JWPS-RT –

SJWPST-21T-M1.0N

SLC-21T-2.0 –YC-310 – – – WC-310 LLC-21T-2.0 – –

SLC-001T-P2.0 –––––––EJ-LCL –

SLC-02T-P2.0 –––––––EJ-LCL –

SLF-01T-P1.3E –YC-202 YRM-201 – – WC-202 LLF/M-01T-P1.3E LEJ-13 LIT-2013

SLM-01T-P1.3E

SLF-41T-P1.3E –YC-203 – – – WC-203 LLF/M-41T-P1.3E LEJ-13 –

SLM-41T-P1.3E

SMF-01T-1.0 –YC-081 – – – – LMF-01T-1.0 – –

SMF-01T-1.3 –YC-082 – – – – LMF-01T-1.3 – –

SMM-003T-P0.5 YRS-800 – – – – WC-800 – – –

SMR-001T-0.6 YRS-580 YC-580R – – –BMR-001T-0.6 – –

SOM-21(T)-187 –YC-680 – – –LOM-21(T)-187 – –

SOM-51(T)-250 –YC-066 – – – WC-066 LOM-51(T)-250 – –

SOTZP-002GD-P0.18 –––––––EJ-OTZS –

Extraction tool

Terminals and parts model

number in alphabetical order

Insertion tool

Hand tools Hand tools

for chain terminals for loose piece terminals for loose piece terminals Extraction and Insertion tools

YRS series YC series YRM series YRF series WC & JUC series

JUK's Hand Tools Terminal in loose form

model No.

YRK . YRK-EX series

Note: Contact JST for wire range.

Hand tools

Crimping tools

SPA-001T-P0.5 –YC-610R ––––BPA-001T-P0.5 EJ-PH –

YC-611R

SPAL-001T-P0.5 –YC-610R ––––BPAL-001T-P0.5 EJ-PAL –

YC-611R

SPAL-002T-P0.5 YRS-1340 – – – – – – EJ-PAL

SPB-1.0-250N-S ––––– JUCS-PB – – –

SPB-2.5-250N-S ––––– JUCS-PB – – –

SPBD-001T-P0.5 –YC-610R – – – – – – –

SPBD-002T-P0.5 –YC-611R – – – – – – –

SPF-01T-2.5C –YC-043R – – – – LPF-01T-2.5C – –

SPH-001T-P0.5L YRS-245 – – – – – – – –

SPH-002T-P0.5L YRS-241 – – – – – – EJ-PH –

SPH-002T-P0.5S YRS-240 – YRM-240 – WC-240 BPH-002T-P0.5S EJ-PH –

SPH-004T-P0.5S YRS-243 – – – – – – EJ-PH –

SPHD-001T-P0.5 –YC-610R –––WC-610 BPHD-001T-P0.5 EJ-PHD-RB –

YC-611R

SPHD-002T-P0.5 YRS-620 – YRM-620 – WC-620 BPHD-002T-P0.5 EJ-PHD-RB –

SPID-001T-P0.5 YRS-1620 – – – – – – EJ-PID –

SPLI-002T-P0.5 YRS-1410 – – – – – – – –

SPND-001T-C0.5 YRS-1091 – – – – – – EJ-PND –

SPND-002T-C0.5 YRS-1090 – – – – – – EJ-PND –

SPNI-001T-P0.5 –YC-610R ––– – – – –

YC-611R

SPNI-002T-P0.5 YRS-1340 – – – – – – – –

SPS-01T-110 –YC-740 – – – WC-740 LPS-01T-110 – –

SPS-01T-187(-8) –YC-730 –––WC-730 LPS-01T-187(-8) EJ-PS187 –

YC-731

SPS-21T-205(-5) –YC-760 – – – – LPS-21T-205(-5) – –

SPS-21T-250 –YC-780 – – – WC-780 LPS-21T-250 EJ-PS250 –

SPS-21T-250S –YC-780 – – – WC-780 LPS-21T-250S EJ-PS250 –

SPS-21T-250R –YC-780 – – – – LPS-21T-250R EJ-PS250 –

SPS-41T-110 –YC-750 –––WC-750 LPS-41T-110 – –

YC-751

SPS-51T-187(-8) –YC-710 –––WC-710 LPS-51T-187(-8) EJ-PS187 –

YC-711

SPS-51T-205 –YC-770 ––––LPS-51T-205 – –

YC-771

SPS-61T-250 –YC-720 – – – WC-720 LPS-61T-250 EJ-PS250 –

SPS-61T-250S –YC-720 – – – – LPS-61T-250S EJ-PS250 –

SPS-61T-250R –YC-721 – – – – LPS-61T-250R EJ-PS250 –

SPS-91T-250 –––YRF-790 – – BPS-91T-250 EJ-PS250 –

SPS-91T-250S –––YRF-790 – – BPS-91T-250S EJ-PS250 –

SPS-91T-250R –––YRF-791 – – BPS-91T-250R EJ-PS250 –

SPSI-001T-M1.1 –YC-335R – – – – – EJ-PSIP –

SPSM-001T-M1.1 –YC-335R – – – – – EJ-PSIR –

SPSI-41T-M1.1 –YC-225R – – – – – EJ-PSIP –

SPSM-41T-M1.1 –YC-226R – – – – – EJ-PSIR –

SPUD-001T-P0.5 YRS-1320 – – – – – – EJ-PUD –

SPUD-002T-P0.5 YRS-1520 – – – – – – EJ-PUD –

109

Extraction tool

Terminals and parts model

number in alphabetical order

Insertion tool

Hand tools Hand tools

for chain terminals for loose piece terminals for loose piece terminals Extraction and Insertion tools

YRS series YC series YRM series YRF series WC & JUC series

JUK's Hand Tools Terminal in loose form

model No.

YRK . YRK-EX series

Note: Contact JST for wire range.

Hand tools

Crimping tools

1211

SPXA-001T-P0.6 ––––– – –EJ-PXA –

SRA-20(T)-** –YC-181 – – – – LRA-20(T)-** – –

SRA-21(T)-** –YC-141 – – – – LRA-21(T)-** – –

SRA-50(T)-** –YC-182 – – – – LRA-50(T)-** – –

SRA-51(T)-** –YC-142 – – – – LRA-51(T)-** – –

SRB-1.0-( ) ––––– JUCS-RB/RT – – –

SRB-2.5-( ) ––––– JUCS-RB/RT – – –

SRB-51(T)-** –YC-142 – – – – LRB-51(T)-** – –

SRC-01(T)-** –YC-033 – – – – LRC-01(T)-** – –

SRC-50(T)-** –YC-183 – – – – LRC-50(T)-** – –

SRC-51(T)-** –YC-142 – – – – LRC-51(T)-** – –

SRF-51(T)-** –YC-142 – – – – LRF-51(T)-** – –

SRFCP-002GG-M0.9 YRS-1530 ––––––EJ-RFC-P –

YRS-1531

SRFF-01GG-S0.9 –––––––EJ-RFC-R –

SRFF-61GG-S0.9 –––YRF-1450 ––EJ-RFC-R –

SRFM-01GG-S0.9 –––– ––EJ-RPZ –

SRFM-61GG-S0.9 –––YRF-1450 ––EJ-RPZ –

SRICM-61GG-S0.6 –YC-840R – – – – – – –

SRICM-61T-S0.6

SRT-1.0-( ) ––––– JUCS-RB/RT – – –

SRT-2.5-( ) ––––– JUCS-RB/RT – – –

SRT-51T-** –YC-143R – – – – LRT-51T-** – –

SRWF-01GG-M0.6

SRWF-01T-M0.6 –––––––EJ-RPZ –

SRWM-01GG-S0.6

SRWF-21GG-M0.6 –––––––EJ-RPZ –

SRWM-21GG-S0.6

SRWF-61GG-M0.6 BRWF-61GG-M0.6

SRWF-61T-M0.6 –YC-840R – – – – BRWM-61GG-S0.6 EJ-RPZ –

SRWM-61GG-S0.6

SSFH-001T-P0.5 YRS-1580 ––––––EJ-SFH –

YRS-1581

SSFH-002T-P0.5 YRS-1490 – – – – – – EJ-SFH –

SSH-003T-P0.2-H YRS-859 – – – – WC-SH2832 – – –

SSH-003GA-P0.2 YRS-859 – – – – WC-SH2832 – – –

SSHJ-003T-P0.2 YRS-859 – – – – – – – –

SSHL-002T-P0.2 YRS-1590 – – – – WC-GH2630 – – –

SSHL-003T-P0.2 YRS-859 – – – – WC-SH2832 – – –

SSHL-003GA1-P0.2 YRS-859 – – – – WC-SH2832 – – –

SSF-01T-P1.4 –YC-500 – – – – BSF/M-01T-P1.4 SLJ-1.4 ITBL-08V

SSM-01T-P1.4

SSF-21T-P1.4 –YC-550 – – – WC-550 BSF/M-21T-P1.4 SLJ-1.4 –

SSM-21T-P1.4

STI-01(T)-110N –YC-041 – – – – LTI-01(T)-110N – –

STI-1.0-250D/N ––––– JUCS-TI – – –

STI-2.5-250D/N ––––– JUCS-TI – – –

STI-41(T)-110N –YC-063 – – – – LTI-41(T)-110N – –

STI-51(T)-250N –YC-322 – – – – LTI-51(T)-250N – –

STO-01(T)-110N(-8) –YC-041 – – – – LTO-01(T)-110N(-8) – –

STO-01(T)-187N(-8) –YC-042 – – – – LTO-01(T)-187N(-8) – –

Extraction tool

Terminals and parts model

number in alphabetical order

Insertion tool

Hand tools Hand tools

for chain terminals for loose piece terminals for loose piece terminals Extraction and Insertion tools

YRS series YC series YRM series YRF series WC & JUC series

JUK's Hand Tools Terminal in loose form

model No.

YRK . YRK-EX series

Note: Contact JST for wire range.

Hand tools

Crimping tools

STO-0.25-110N –YC-810 – – – – – – –

STO-0.5-110N –YC-820 – – – JUCS-05110 – – –

STO-1.0-110N ––––– JUCS-2.8/4.8 – – –

STO-1.0-187N ––––– JUCS-2.8/4.8 – – –

STO-1.0-250N ––––– JUCS-6.3 – – –

STO-2.5-250N ––––– JUCS-6.3 – – –

STO-21(T)-205N(-5) –YC-053 – – – – LTO-21(T)-205N – –

STO-21(T)-250N –YC-102 – – – – LTO-21(T)-250N – –

STO-41(T)-110N(-8) –YC-062 – – – – LTO-41(T)-110N(-8) – –

STO-41(T)-187N(-8) –YC-051 – – – – LTO-41(T)-187N(-8) – –

STO-41T-187S –YC-064 – – – – LTO-41T-187S EJ-187S –

STO-61(T)-250N –YC-047 – – – – LTO-61(T)-250N – –

STO-81(T)-250N –YC-280 – YRF-280 – – LTO-81(T)-250N – –

STS-002GG-P0.6 YRS-1360 – – – – – – EJ-TSD –

STSD-002GG-P0.6

SVA-41T-P1.1 –YC-450 – – – – BVA-41T-P1.1 – –

SVF-01T-1.5A –YC-044 – – – – LVF-01T-1.5A – –

SVF-01T-1.5N –YC-151 – – – – LVF-01T-1.5N EJ-SV –

SVF-01T-2.36N –YC-152 – – – – LVF-01T-2.36N EJ-LV –

SVF-42T-P2.0 –YC-592 – – – WC-592 BVF-42T-P2.0 VLJ-20 –

SVM-42T-P2.0 –YC-593 – – – WC-592 BVM-42T-P2.0 VLJ-20 –

SVF-61T-P0.2 –YC-590 – YRF-590 – WC-590 BVF/M-61T-P2.0 VLJ-20 –

SVM-61T-P0.2

SVF-81T-P0.2 –––YRF-591 – WC-591 BVF/M-81T-P2.0 VLJ-20 –

SVM-81T-P0.2

YC-160R YRM-160

SVH-21T-P1.1 –YC-161R – – – WC-160 BVH-21T-(P)1.1 EJ-NV –

YC-164R YRM-164

SVH-41T-P1.1 –YC-930R ––– WC-930 BVH-41T-P1.1 EJ-NV –

YC-931R

SVSF-61T-S2.0 –––YRF-590 – – – VLJ-20 –

SVSM-61T-S2.0

SVSF-81T-S2.0 –––YRF-591 – – – VLJ-20 –

SVSM-81T-S2.0

SVT-41T-P1.1 –YC-630 – – – – BVT-41T-P1.1 EJ-VT –

SVU-21T-P0.6 –YC-990R – – – – BVU-21T-P0.6 EJ-VU –

SVYF-61T-P0.5A –––YRF-536 – – – – –

SWPJT-21T-P0.5 –––––––EJ-WPJ –

SWPJT-21T-P0.5A –––––––EJ-WPJ –

SWPJR-21T-M0.5 –––––––EJ-WPJ –

SWPKP-21T-0.6 –––YRF-1051 – – BWPKP-21T-0.6 – –

SWPKR-21T-0.6 –––YRF-1050 – – BWPKR-21T-0.6 – –

SWPR-001T-P025 YRS-980 – – – – WC-JWPF – EJ-JWPF –

SWPT-001T-P025

SXA-01T-P0.6 YRS-701 YC-701R – – – WC-700M BXA-01T-P0.6 EJ-XAG, EJ-XMP –

SXA-001T-P0.6 YRS-692 YC-692R – – – – BXA-001T-P0.6 EJ-XMP, EJ-XMR IT-XA

SXA-001T-P0.6L YRS-691 – – – – WC-691 – – –

1413

Extraction tool

Terminals and parts model

number in alphabetical order

Insertion tool

Hand tools Hand tools

for chain terminals for loose piece terminals for loose piece terminals Extraction and Insertion tools

YRS series YC series YRM series YRF series WC & JUC series

JUK's Hand Tools Terminal in loose form

model No.

YRK . YRK-EX series

Note: Contact JST for wire range.

Hand tools

Crimping tools

1615

Extraction tool

Terminals and parts model

number in alphabetical order

Insertion tool

Hand tools Hand tools

for chain terminals for loose piece terminals for loose piece terminals Extraction and Insertion tools

YRS series YC series YRM series YRF series WC & JUC series

JUK's Hand Tools Terminal in loose form

model No.

YRK . YRK-EX series

Hand tools

Crimping tools

SXAM-01T-P0.6 YRS-701 YC-701R – – – WC-700M BXAM-01T-P0.6 EJ-XAW –

SXAM-001T-P0.6 YRS-692 YC-692R – – – – BXAM-001T-P0.6 EJ-XAW –

SXF-01T-P0.7 –YC-251 – – – – BXF-01T-(P)0.7 LEJ-7 –

SXF-41T-P0.7 –YC-252 – – – – BXF-41T-(P)0.7 LEJ-7 –

SXH-001T-P0.6 YRS-110 YC-110R –––WC-110 BXH-001T-P0.6 XJ-06 –

YC-111R

SXH-001T-P0.6N –––––––XJ-06 –

SXH-002T-P0.6 YRS-480 – – – – – – XJ-06 –

SXM-01T-P0.6 YRS-701 YC-701R – – – – BXM-01T-P0.6 EJ-XAG, EJ-XMP –

SXM-001T-P0.6 YRS-692 YC-692R – – – – BXM-001T-P0.6 EJ-XMP, EJ-XMR IT-XA

SXNI-001T-P0.6 YRS-1380 – – – – – – – –

SXNI-003T-P0.6 YRS-1390 – – – – – – – –

SYF-001T-P0.6 YRS-125 – – – – – – – –

SYF-01T-P0.5A –YC-520 – – – WC-520 BYF-01T-P0.5A YLJ-0.5 –

SYM-01T-P0.5A BYM-01T-P0.5A

SYF-41T-P0.5A –YC-530 – – – WC-530 BYF-41T-P0.5A YLJ-0.5 –

SYM-41T-P0.5A BYM-41T-P0.5A

SYF-61T-P0.5A – – – YRF-536 – – – – –

SYM-001T-P0.6 YRS-121 YC-121R – – – WC-121 BYM-001T-P0.6 SMJ-06 –

SYM-01T-P0.7 –YC-251 – – – – BYM-01T-(P)0.7 LEJ-7 –

SYM-41T-P0.7 –YC-252 – – – – BYM-41T-(P)0.7 LEJ-7 –

SZE-002T-P0.3 YRS-1460 – – – – – – – –

SZE-003T-P0.3 YRS-1330 – – – – – – – –

SZF-01T-P0.7 –YC-390R – – – – BZF-01T-(P)07 ZLJ-0.7S –

SZM-01T-P0.7 BZM-01T-(P)0.7

SZF-41T-P0.7 –YC-380R – – – – BZF-41T-(P)07 ZLJ-0.7S –

SZM-41T-P0.7 BZM-41T-(P)0.7

SZH-002T-P0.5 YRS-491 – – – – WC-491 – – –

SZH-003T-P0.5 YRS-490 – – – – WC-490 – – –

SZN-002T-P0.7K YRS-541 – – – – – – – –

SZN-003T-P0.7K YRS-540 – – – – – – – –

SZND-002T-P0.5 YRS-1710 – – – – – – – –

SZPD-002T-P0.3 YRS-1460 – – – – – – – –

Note : Contact JST for wire range.

Crimping tools

Contact and Applicable dies

J1000

Type II L

J1LL

J2SL

J3SL

J2ML

J3ML

J2LL

J3LL

J32LL

Yellow green

Handle unit

Upper pin

Lower pin

Case

White

Yellow

Purple

Green

Orange

Red

Blue

J2000

J300

Series Anvil Common partsColor markNominal

Contact Model No. Crimper

Receptacle

SF1F-21(*)-P0.6

SJ2F-002GF-P1.0

SJ2F-01GF-P1.0

SJ2F-21GF-P1.0

SF3F-002(*)-P2.0

SF3F-01(*)-P2.0

SF3F-41(*)-P2.0

SF3F-71(*)-P2.0

SF1M-21(*)-M0.6A

J1LA / B

J1LC / D

J2SA / B

J2MA / B

J2LA / B

J3SA / B

J3SC / D

J3MA / B

J3MC / D

J3LA / B

J3LC / D

J32LA / B

SJ2M-002GF-M1.0N

SJ2M-01GF-M1.0N

SJ2M-21GF-M1.0N

SF3M-002(*)-M2.0N

SF3M-01(*)-M2.0N

SF3M-41(*)-M2.0N

SF3M-71(*)-M2.0N

Tab Crimper

Model No. Applicable wire size

AWG

Insulation O.D.

(mm)

Die mark

#20

#18

#22

KV0.75

#28

#24

#20

#22

#20

#28

#24

#26

#24

#20

#22

#20

#16

#18

#16

#14

1.76

2.03

1.58

1.90

1.20

1.43

1.53

1.58

1.76

1.20

1.43

1.30

1.11

1.43

1.76

1.58

2.56

1.76

2.35

2.03

2.83

3.10

3.30

YRK-EX

• High reliability of crimping is provided by choosing the crimper and anvil suitable for the wire specification.

• The crimping die can be easily exchanged by only insertion and extraction of pin.

• Common handle and crimping dies can be stored in One case and it is easy to carry.

Dies replacement type hand crimping tools

Patent pending

Dimensions: 376(W)×295(L)×73(D) mm

Dimensions: 75(W)×314(L)×25(D) mm

Weight: Approx. 800 g (When assembling dies)

Note: 1. J1000 Finish(*): T ...... Tin-plated

GC ...Gold-plated

2. J300 Finish(*): GF… Nickel-undercoated, 0.38

m selective gold-plated

GI… Nickel-undercoated, 0.76

m selective gold-plated

T ......Tin-plated

3. The wear of parts is caused by using hand tool repeatedly.

Measure the crimping height daily and conduct periodical inspection of the wearing parts,

such as ratchet, pin and so on.

*1... Crimper is either the pair of

A and B or the pair of C and D.

*2... When using wire type UL 2517.

Crimping tools

Contact and Applicable dies

J1000

Type II L

J2000

J300

Series Nominal Contact Model No.

Receptacle

SF1F-21(*)-P0.6

SJ2F-002GF-P1.0

SJ2F-01GF-P1.0

SJ2F-21GF-P1.0

SF3F-002(*)-P2.0

SF3F-01(*)-P2.0

SF3F-41(*)-P2.0

SF3F-71(*)-P2.0

SF1M-21(*)-M0.6A YRK-1210

YRK-8851

YRK-8861

YRK-1120

YRK-8821

YRK-8811

YRK-8801

YRK-1071

LA / LB

LC / LD

SA / SB

MA / MB

LA / LB

SA / SB

SC / SD

MA / MB

MC / MD

LA / LB

LC / LD

2LA / 2LB

SJ2M-002GF-M1.0N

SJ2M-01GF-M1.0N

SJ2M-21GF-M1.0N

SF3M- 002(*)-M2.0N

SF3M-01(*)-M2.0N

SF3M-41(*)-M2.0N

SF3M-71(*)-M2.0N

Tab Hand crimp

tools Model No. of

crimper Applicable wire size

AWG

Insulation O.D. (mm)

Marking

2LA

2LB

#22

KV0.75

#20

#18

#28

#24

#20

#22

#20

#28

#24

#26

#24

#20

#22

#20

#16

#18

#16

#14

1.58

1.90

1.76

2.03

1.20

1.43

1.53

1.58

1.76

1.20

1.43

1.30

1.11

1.43

1.76

1.58

2.56

1.76

2.35

2.03

2.83

3.10

3.30

*1

YRK series hand crimping tools suitable for mass-production

• Crimping work, such as setting contacts to hand tools etc., is facilitated by using a strip contact to improve the productivity.

• A light operation enables to terminate the contact correctly, by adopting straight-ahead crimping.

• A structure, that the carrier of contact doesn't fly off, has been adopted to this tool.

YRK Standard type

• When exchanging the crimper, the crimping suitable for

the wire specification can be conducted.

• Anvil is fixed to tool.

Hand Crimping Tools

Dimensions: 75(W)×314(L)×25(D) mm

Weight: Approx. 800 g (When assembling dies)

Note: 1. J1000 Finish(*): T ...... Tin-plated

GC ...Gold-plated

2. J300 Finish(*): GF… Nickel-undercoated, 0.38

m selective gold-plated

GI… Nickel-undercoated, 0.76

m selective gold-plated

T ......Tin-plated

3. The wear of parts is caused by using hand tool repeatedly.

Measure the crimping height daily and conduct periodical inspection of the wearing parts,

such as ratchet, pin and so on.

*1... Crimper is either the pair of

A and B or the pair of C and D.

*2... When using wire type UL 2517.