For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
1
HMC869LC5
v01.0614
GaAs MMIC I/Q DOWNCONVERTER
12 - 16 GHz
General Description
FeaturesTypical Applications
The HMC869LC5 is a GaAs MCM I/Q downconverter
in a leadless RoHS compliant SMT package. This
device provides a small signal conversion gain of
14 dB with a noise gure of 2.8 dB and 32 dB of image
rejection. The HMC869LC5 utilizes an LNA followed
by an image reject mixer which is driven by an LO buf-
fer amplier. The image reject mixer eliminates the
need for a lter following the LNA, and removes ther-
mal noise at the image frequency. I and Q mixer out-
puts are provided and an external 90° hybrid is needed
to select the required sideband. The HMC869LC5 is
a much smaller alternative to hybrid style image reject
mixer downconverter assemblies, and it eliminates
the need for wire bonding by allowing the use of
surface mount manufacturing techniques.
Electrical Specications, TA = +25 °C,
IF = 100 MHz, LO = +2 dBm, VD3 = 5V, VD1, VD2 = 3V*
Parameter Min. Typ. Max. Units
Frequency Range, RF 12 - 16 GHz
Frequency Range, LO 8.5 - 19.5 GHz
Frequency Range, IF DC - 3.5 GHz
Conversion Gain (As IRM) 10 14 dB
Noise Figure 2.8 dB
Image Rejection 15 32 dB
1 dB Compression (Input) -10 dBm
LO to RF Isolation 30 45 dB
LO to IF Isolation 20 32 dB
IP3 (Input) -1 dBm
Amplitude Balance 0dB
Phase Balance ±10 Deg
Supply Current (ID1 + ID2) 60 88 mA
Supply Current (ID3) 100 120 mA
*Data taken as IRM with external 90° IF Hybrid
Functional Diagram
The HMC869LC5 is ideal for:
• Point-to-Point and Point-to-Multi-Point Radio
• Military Radar, EW & ELINT
• Satellite Communications
Conversion Gain: 14 dB
Image Rejection: 32 dB
LO to RF Isolation: 45 dB
Noise Figure: 2.8 dB
Input IP3: -1 dBm
32 Lead 5x5mm SMT Ceramic Package: 25mm²
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
2
HMC869LC5
v01.0614
GaAs MMIC I/Q DOWNCONVERTER
12 - 16 GHz
Conversion Gain vs. Temperature
Input P1dB vs. Temperature
Conversion Gain vs. LO Drive
Image Rejection vs. Temperature
Return Loss
Input IP3 vs. LO Drive
Data Taken As IRM With External 90° IF Hybrid
0
5
10
15
20
11 12 13 14 15 16 17
+25C
+85C
-40C
CONVERSION GAIN (dB)
RF FREQUENCY (GHz)
10
20
30
40
50
11 12 13 14 15 16 17
+25C
+85C
-40C
IMAGE REJECTION (dB)
RF FREQUENCY (GHz)
0
5
10
15
20
11 12 13 14 15 16 17
-2 dBm
0 dBm
+2 dBm
+4 dBm
+6 dBm
CONVERSION GAIN (dB)
RF FREQUENCY (GHz)
-16
-14
-12
-10
-8
-6
-4
11 12 13 14 15 16 17
+25C
+85C
-40C
P1dB (dBm)
RF FREQUENCY (GHz)
-25
-20
-15
-10
-5
0
8 10 12 14 16 18 20
LO
RF
RETURN LOSS (dB)
FREQUENCY (GHz)
-8
-6
-4
-2
0
2
11 12 13 14 15 16 17
-2 dBm
0 dBm
+2 dBm
+4 dBm
IP3 (dBm)
RF FREQUENCY (GHz)
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
3
HMC869LC5
v01.0614
GaAs MMIC I/Q DOWNCONVERTER
12 - 16 GHz
Isolations IF Bandwidth*
Amplitude Balance vs. LO Drive Phase Balance vs. LO Drive
Quadrature Channel Data Taken Without IF Hybrid
* Conversion gain data taken with external IF hybrid, LO frequency xed at 12 GHz and RF varied
Noise Figure vs. LO Drive,
LO Frequency = 12 GHz
Noise Figure vs. LO Drive,
IF Frequency = 100 MHz
-60
-50
-40
-30
-20
-10
0
10
11 12 13 14 15 16 17
ISOLATION (dB)
RF FREQUENCY (GHz)
LO/IF2
LO/IF1
RF/IF1
RF/IF2
LO/RF
-5
-3
-1
1
3
5
11 12 13 14 15 16 17
-2 dBm
0 dBm
+2 dBm
+4 dBm
AMPLITUDE BALANCE (dB)
RF FREQUENCY (GHz)
-30
-20
-10
0
10
20
30
0.5 1 1.5 2 2.5 3 3.5
RETURN LOSS
CONVERSION GAIN
RESPONSE (dB)
IF FREQUENCY (GHz)
-20
-15
-10
-5
0
5
10
15
20
11 12 13 14 15 16 17
-2 dBm
0 dBm
+2 dBm
+4 dBm
PHASE BALANCE (degrees)
RF FREQUENCY (GHz)
0
1
2
3
4
5
6
0.5 1 1.5 2 2.5 3 3.5
-4 dBm
-2 dBm
0 dBm
+2 dBm
+4 dBm
NOISE FIGURE (dB)
IF FREQUENCY (GHz)
0
1
2
3
4
5
6
11 12 13 14 15 16 17
-2 dBm
0 dBm
+2 dBm
+4 dBm
NOISE FIGURE (dB)
RF FREQUENCY (GHz)
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
4
HMC869LC5
v01.0614
GaAs MMIC I/Q DOWNCONVERTER
12 - 16 GHz
MxN Spurious Outputs
nLO
mRF 01234
0xx 43 40 54 xx
122 xx 42 56 77
274 67 xx 74 98
399 97 73 xx 90
4xx 104 120 102 xx
RF = 13.6 GHz @ -20 dBm
LO = 13.5 GHz @ +2 dBm
Data taken without IF hybrid
All values in dBc below IF power level.
Absolute Maximum Ratings
RF +5 dBm
LO Drive +20 dBm
VD1, VD2 4.0V
VD3 5.5V
Channel Temperature 150 °C
Continuous Pdiss (T=85°C)
(derate 9.56 mW/°C above 85°C) 0.65 W
Thermal Resistance (RTH)
(channel to package bottom) 71 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
5
HMC869LC5
v01.0614
GaAs MMIC I/Q DOWNCONVERTER
12 - 16 GHz
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING: 30 - 80 MICROINCHES
GOLD OVER 50 MICROINCHES MINIMUM NICKLE
3. DIMENSIONS ARE IN INCHES [MILLIMETERS]
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND
Package Information
Part Number Package Body Material Lead Finish MSL Rating Package Marking [2]
HMC869LC5 Alumina, White Gold over Nickel MSL3 [1] H869
XXXX
[1] Max peak reow temperature of 260 °C
[2] 4-Digit lot number XXXX
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
6
HMC869LC5
v01.0614
GaAs MMIC I/Q DOWNCONVERTER
12 - 16 GHz
Pin Number Function Description Interface Schematic
1, 5, 7 - 9,
13 - 16, 22 - 27,
30 - 32
N/C
The pins are not connected internally; however, all data
shown herein was measured with these pins connected
to RF/DC ground externally.
2, 4, 10, 12,
17, 19, 21 GND These pins and ground paddle must be
connected to RF/DC ground.
3RF This pin is AC coupled
and matched to 50 Ohms.
6VD3 Power supply for LO amplier.
28, 29 VD2, VD1 Power supply for RF LNA.
18 IF2
This pin is DC coupled for applications not requiring
operation to DC. This port should be DC blocked
externally using a series capacitor whose value has
been chosen to pass the necessary frequency range.
For operation to DC, this pin must not sink / source more
than 3 mA of current or part non-function and possible
failure will result.
20 IF1
11 LO This pin is AC coupled
and matched to 50 Ohms.
Pin Descriptions
Typical Application
Note: LSB and USB is determined by GND on Hybrid
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
7
HMC869LC5
v01.0614
GaAs MMIC I/Q DOWNCONVERTER
12 - 16 GHz
Evaluation PCB
The circuit board used in the nal application
should use RF circuit design techniques. Signal
lines should have 50 Ohm impedance while the
package ground leads and exposed paddle should
be connected directly to the ground plane similar
to that shown. A sufficient number of via holes
should be used to connect the top and bottom
ground planes. The evaluation circuit board shown
is available from Hittite upon request.
List of Materials for Evaluation PCB 111227 [1]
Item Description
J1, J2 PCB Mount SMA RF Connector, SRI
J3, J4 PCB Mount SMA Connector, Johnson
J5, J6, J7 DC Pin
C1, C2, C3 Capacitor 0402, Pkg. 100pF
C4, C5, C6 Capacitor 0402, Pkg. 1000pF
C7, C8 ,C 9 Capacitor, Case A, 2.2uF
R1, R2 Resistor, 0402 Pkg. 0 Ohm
U1 HMC869LC5
PCB [2] 1112 25 Eva l uati o n Boar d
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25FR
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
8
HMC869LC5
v01.0614
GaAs MMIC I/Q DOWNCONVERTER
12 - 16 GHz
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
