HMC869LC5 v01.0614 Typical Applications Features The HMC869LC5 is ideal for: Conversion Gain: 14 dB * Point-to-Point and Point-to-Multi-Point Radio Image Rejection: 32 dB * Military Radar, EW & ELINT LO to RF Isolation: 45 dB * Satellite Communications Noise Figure: 2.8 dB Input IP3: -1 dBm TE 32 Lead 5x5mm SMT Ceramic Package: 25mm Functional Diagram General Description B SO LE The HMC869LC5 is a GaAs MCM I/Q downconverter in a leadless RoHS compliant SMT package. This device provides a small signal conversion gain of 14 dB with a noise figure of 2.8 dB and 32 dB of image rejection. The HMC869LC5 utilizes an LNA followed by an image reject mixer which is driven by an LO buffer amplifier. The image reject mixer eliminates the need for a filter following the LNA, and removes thermal noise at the image frequency. I and Q mixer outputs are provided and an external 90 hybrid is needed to select the required sideband. The HMC869LC5 is a much smaller alternative to hybrid style image reject mixer downconverter assemblies, and it eliminates the need for wire bonding by allowing the use of surface mount manufacturing techniques. Electrical Specifications, TA = +25 C, IF = 100 MHz, LO = +2 dBm, VD3 = 5V, VD1, VD2 = 3V* Parameter Min. Typ. Max. Units Frequency Range, RF 12 - 16 GHz Frequency Range, LO 8.5 - 19.5 GHz DC - 3.5 GHz 14 dB 2.8 dB 32 dB O MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT GaAs MMIC I/Q DOWNCONVERTER 12 - 16 GHz Frequency Range, IF Conversion Gain (As IRM) 10 Noise Figure Image Rejection 15 1 dB Compression (Input) -10 dBm LO to RF Isolation 30 45 dB LO to IF Isolation 20 32 dB IP3 (Input) -1 dBm Amplitude Balance 0 dB Phase Balance 10 Deg Supply Current (ID1 + ID2) 60 88 mA Supply Current (ID3) 100 120 mA *Data taken as IRM with external 90 IF Hybrid 1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC869LC5 v01.0614 GaAs MMIC I/Q DOWNCONVERTER 12 - 16 GHz Data Taken As IRM With External 90 IF Hybrid IMAGE REJECTION (dB) 50 15 +25C +85C -40C 5 0 30 20 10 11 12 13 14 15 16 17 11 12 Conversion Gain vs. LO Drive 14 15 16 17 18 20 16 17 Return Loss 0 20 LO RF -5 10 B SO 15 -2 dBm 0 dBm +2 dBm +4 dBm +6 dBm 5 0 11 12 13 14 15 16 -10 -15 -20 -25 8 17 10 12 14 16 FREQUENCY (GHz) RF FREQUENCY (GHz) Input IP3 vs. LO Drive O Input P1dB vs. Temperature 2 -4 -6 0 -8 IP3 (dBm) P1dB (dBm) 13 RF FREQUENCY (GHz) LE RF FREQUENCY (GHz) CONVERSION GAIN (dB) +25C +85C -40C 40 TE 10 RETURN LOSS (dB) CONVERSION GAIN (dB) 20 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT Image Rejection vs. Temperature Conversion Gain vs. Temperature -10 -12 +25C +85C -40C -14 -2 -4 -2 dBm 0 dBm +2 dBm +4 dBm -6 -8 -16 11 12 13 14 15 RF FREQUENCY (GHz) 16 17 11 12 13 14 15 RF FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 2 HMC869LC5 v01.0614 GaAs MMIC I/Q DOWNCONVERTER 12 - 16 GHz Quadrature Channel Data Taken Without IF Hybrid IF Bandwidth* 10 30 RF/IF1 -10 20 RESPONSE (dB) RF/IF2 -20 10 RETURN LOSS CONVERSION GAIN 0 TE LO/IF2 -30 LO/IF1 -40 -10 -20 -50 LO/RF -60 11 12 13 14 15 16 -30 0.5 17 1 2 2.5 3 3.5 16 17 16 17 IF FREQUENCY (GHz) Amplitude Balance vs. LO Drive Phase Balance vs. LO Drive 5 20 15 -2 dBm 0 dBm +2 dBm +4 dBm 1 -1 -3 11 B SO 3 -5 12 13 14 15 16 -2 dBm 0 dBm +2 dBm +4 dBm 10 5 0 -5 -10 -15 -20 17 11 12 6 5 NOISE FIGURE (dB) 4 3 2 1 0 0.5 15 6 -4 dBm -2 dBm 0 dBm +2 dBm +4 dBm 5 14 Noise Figure vs. LO Drive, IF Frequency = 100 MHz O Noise Figure vs. LO Drive, LO Frequency = 12 GHz 13 RF FREQUENCY (GHz) RF FREQUENCY (GHz) NOISE FIGURE (dB) 1.5 LE RF FREQUENCY (GHz) PHASE BALANCE (degrees) ISOLATION (dB) 0 AMPLITUDE BALANCE (dB) MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT Isolations -2 dBm 0 dBm +2 dBm +4 dBm 4 3 2 1 0 1 1.5 2 2.5 IF FREQUENCY (GHz) 3 3.5 11 12 13 14 15 RF FREQUENCY (GHz) * Conversion gain data taken with external IF hybrid, LO frequency fixed at 12 GHz and RF varied 3 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC869LC5 v01.0614 GaAs MMIC I/Q DOWNCONVERTER 12 - 16 GHz Absolute Maximum Ratings nLO mRF 0 1 2 3 RF +5 dBm 4 LO Drive +20 dBm xx 43 40 54 xx VD1, VD2 4.0V 22 xx 42 56 77 VD3 5.5V 2 74 67 xx 74 98 Channel Temperature 150 C 3 99 97 73 xx 90 xx 104 120 102 xx Continuous Pdiss (T=85C) (derate 9.56 mW/C above 85C) 0.65 W 4 RF = 13.6 GHz @ -20 dBm LO = 13.5 GHz @ +2 dBm Data taken without IF hybrid Thermal Resistance (RTH) (channel to package bottom) 71 C/W Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C LE All values in dBc below IF power level. TE 0 1 O B SO ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT MxN Spurious Outputs 4 HMC869LC5 v01.0614 GaAs MMIC I/Q DOWNCONVERTER 12 - 16 GHz TE LE B SO NOTES: 1.. PACKAGE BODY MATERIAL: ALUMINA 2.. LEAD AND GROUND PADDLE PLATING: 30 - 80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKLE 3.. DIMENSIONS ARE IN INCHES [MILLIMETERS] 4.. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 5.. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM 6.. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND O MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT Outline Drawing Package Information Part Number Package Body Material Lead Finish HMC869LC5 Alumina, White Gold over Nickel MSL Rating MSL3 [1] Package Marking [2] H869 XXXX [1] Max peak reflow temperature of 260 C [2] 4-Digit lot number XXXX 5 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC869LC5 v01.0614 GaAs MMIC I/Q DOWNCONVERTER 12 - 16 GHz Pin Descriptions Interface Schematic N/C 2, 4, 10, 12, 17, 19, 21 GND These pins and ground paddle must be connected to RF/DC ground. 3 RF This pin is AC coupled and matched to 50 Ohms. 6 VD3 Power supply for LO amplifier. 28, 29 VD2, VD1 Power supply for RF LNA. 18 IF2 20 IF1 11 LO LE This pin is DC coupled for applications not requiring operation to DC. This port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary frequency range. For operation to DC, this pin must not sink / source more than 3 mA of current or part non-function and possible failure will result. This pin is AC coupled and matched to 50 Ohms. O Typical Application MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT Description The pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. TE Function 1, 5, 7 - 9, 13 - 16, 22 - 27, 30 - 32 B SO Pin Number Note: LSB and USB is determined by GND on Hybrid Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 6 HMC869LC5 v01.0614 GaAs MMIC I/Q DOWNCONVERTER 12 - 16 GHz TE LE B SO List of Materials for Evaluation PCB 111227 [1] O MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT Evaluation PCB Item Description J1, J2 PCB Mount SMA RF Connector, SRI J3, J4 PCB Mount SMA Connector, Johnson J5, J6, J7 DC Pin C1, C2, C3 Capacitor 0402, Pkg. 100pF C4, C5, C6 Capacitor 0402, Pkg. 1000pF C7, C8,C9 Capacitor, Case A, 2.2uF R1, R2 Resistor, 0402 Pkg. 0 Ohm U1 HMC869LC5 PCB [2] 111225 Evaluation Board The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 or Arlon 25FR 7 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC869LC5 v01.0614 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT O B SO LE TE GaAs MMIC I/Q DOWNCONVERTER 12 - 16 GHz 8 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: HMC869LC5TR HMC869LC5 111227-HMC869LC5 HMC869LC5TR-R5