BFC2 809 07... Vishay BCcomponents Film Dielectric Trimmers TEST VOLTAGE (DC) FOR 1 MINUTE: FEATURES * High temperature type 400 V * Housing dimensions: 11 mm x 14 mm x 9 mm MAXIMUM CONTACT RESISTANCE: * For a basic grid of 2.54 mm 5 m * Top adjustment e3 * Vertical version MINIMUM INSULATION RESISTANCE BETWEEN APPLICATIONS STATOR AND ROTOR: * For fine adjustment in professional applications 10 000 M DESCRIPTION: CATEGORY TEMPERATURE RANGE: The trimmers consist of a glass reinforced polysulphone frame with a polysulphone dust cover, brass rotor and stator with PTFE or polycarbonate film as the dielectric. The stator plates are stacked on pins and separated by rings, so that it is possible to produce a single stator or a differential type. - 40 to + 125 C CLIMATIC CATEGORY (IEC 60068): The rotor contact surfaces are plated to ensure a long life and a stable contact even under severe climatic conditions. 40/125/21 QUALITY LEVEL: Sampling and data evaluation for quality level in accordance with "MIL-STD-105D" and "IEC 60410": MINIMUM STORAGE TEMPERATURE: < 0.15 % major defects - 55 C < 0.65 % minor defects Each capacitor is tested for minimum Cmax and is also subjected to the full test voltage. RELATED SPECIFICATION: Cmin/Cmax: IEC 60418-1 and 4 SINGLE STATOR TYPE EFFECTIVE ANGLE OF ROTATION: 2.5/20 to 7/100 pF 180 (rotation in 180 only, see "Life of Trimmer") DIFFERENTIAL TYPE 2/12 to 7/150 pF OPERATING TORQUE: 1.5 to 25 mNm RATED VOLTAGE (DC): 200 V LIFE OF TRIMMER: MAXIMUM AXIAL THRUST: 2N Document Number 28530 Revision: 18-Oct-07 Maximum 10 cycles: rotation in 180 only (the electrical and mechanical performance is not guaranteed if rotated beyond 10 cycles) For technical questions, contact: dc-film@vishay.com www.vishay.com 329 BFC2 809 07... Vishay BCcomponents Film Dielectric Trimmers 0.8 0.1 (2x) 14 0.5 0.1 (2x) 0.8 0.1 (2x) + 0.1 0 (2x) 0.6 10.16 0.2 0 - 0.2 3.6 0.2 0.5 0.1 (2x) 5.8 0.1 marking 7.62 0.2 11.5 depth of slot = 0.6 8.6 max. 0.6 0.05 0 - 0.3 9.2 0.4 4 0.5 3.81 S handbook, halfpage 2.54 R R 1.3 (4x) S R = rotor, S = stator Trimmers BFC2 809 07... series Dimensions in millimeters ADJUSTMENT: MARKING: The trimmers can be adjusted with a screwdriver or trimming key. Capacitance increase is obtained with clockwise rotation The trimmers are marked with the capacitance value in pF, followed by the letter `E' (single-stator type) or the letter `D' (differential type). MOUNTING: PACKAGING: The trimmer can be mounted on printed-circuit boards with a grid of 2.54 mm and a minimum hole diameter of 1.25 mm. Blister packs of 70 units each. For smallest packaging quantity (SPQ) see Electrical Data Table. ORDERING INFORMATION Cmin /Cmax (pF) CATALOG NUMBER BFC2 809 07... TOP AND BOTTOM ADJUSTMENT SINGLE STATOR TYPE DIFFERENTIAL TYPE 2/12 - 018 2.5/20 004 006 4/40 008 009 5/60 011 012 6/80 013 014 7/100 015 016 7/150 - 107 www.vishay.com 330 For technical questions, contact: dc-film@vishay.com Document Number 28530 Revision: 18-Oct-07 BFC2 809 07... Film Dielectric Trimmers Vishay BCcomponents ELECTRICAL DATA TAN AT Cmax x 10-4 GUARANTEED MAX. Cmin / MIN. Cmax AT 200 kHz (pF) TYPE 2/12 differential PTFE 1) single stator 2.5/20 PTFE differential single stator 4/40 PTFE differential single stator 5/60 PTFE differential single stator 6/80 PTFE differential single stator 7/100 differential 7/150 differential 1 MHz 100 MHz 10 17 0 200 350 .... 809 07018 0 200 350 .... 809 07004 10 10 10 10 17 17 25 25 PTFE 10 25 2) 50 - PC CATALOG NUMBER TEMP. COEFF. 3) (10-6/K) DIEL. 0 200 0 200 0 200 0 200 0 200 SPQ BFC2 ... ..... 350 .... 809 07006 350 .... 809 07008 350 .... 809 07009 350 .... 809 07011 350 .... 809 07012 350 .... 809 07013 350 .... 809 07014 350 .... 809 07015 350 .... 809 07016 350 .... 809 07107 Notes: 1. PTFE = polytetrafluorethylene 2. PC = polycarbonate 3. C: 60 % to 80 % of Cmax; Tamb: from + 20 C to + 125 C TEST PROCEDURES AND REQUIREMENTS IEC 60418-1 CLAUSE IEC 60068 TEST METHOD TEST PROCEDURE REQUIREMENTS 4.2 method of mounting method A 14 capacitance drift after TC measurement C/C: 1 % 19 thrust axial thrust of 2 N C/C: 0.3 % 21 robustness of terminations: 1N no damage 1 cycle; 0.5 hours at lower and 0.5 C/C: 1 % 21.1 Ua 21.2 Ub 22 Na tensile bending bending not allowed rapid change of temperature hours at upper category temperature 23 T soldering: Ta solderability Tb resistance to heat solder bath immersion 3 mm; good wetting 235 C; 2 s no mechanical damage solder bath: 260 C; 10 s no mechanical damage 24 Eb impact bump 4000 10 bumps; 40 g; 6 ms C/C: 0.2 %; 25 Fc vibration frequency 10 to 55 Hz; C/C: 0.25 %; amplitude 0.35 mm; no mechanical damage no mechanical damage 1.5 hours Document Number 28530 Revision 18-Oct-07 For technical questions, contact: dc-film@vishay.com www.vishay.com 331 BFC2 809 07... Vishay BCcomponents IEC 60418-1 CLAUSE IEC 60068 TEST METHOD 26 26.1 Film Dielectric Trimmers TEST PROCEDURE C/C: 3 climatic sequence: B dry heat REQUIREMENTS 16 hours at upper category tan : 10 x 10-4 temperature Rins: 10000 M; rotor contact R: 10 m 26.2 D 26.3 Aa damp heat accelerated, 1 cycle; 24 hours; + 40 C; voltage proof: first cycle 95 to 100 % RH 400 V for 1 minute cold 16 hours; - 40 C visual examination: no mechanical damage 26.5 27 Ca damp heat accelerated, 1 cycle; 24 hours; + 40 C; operating torque: remaining cycles 95 to 100 % RH 1.5 to 35 mNm 21 days; + 40 C; C/C: 3 % tan : 10 x 10-4 damp heat steady state 90 to 95 % RH Rins: 10000 M; rotor contact R: 10 m voltage proof: 400 V for 1 minute visual examination: no mechanical damage operating torque: 1.5 to 35 mNm 29 mechanical endurance 10 cycles Maximum 10 cycles: rotation in 180 only (the electrical and mechanical performance is not guaranteed if rotated beyond 10 cycles) C/C: 0.3 % C/C after axial thrust: 0.3 %; rotor contact R: 10 m voltage proof: 400 V for 1 minute visual examination: no mechanical damage operating torque: 1 to 50 mNm www.vishay.com 332 For technical questions, contact: dc-film@vishay.com Document Number 28530 Revision: 18-Oct-07 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000