MCC TM Micro Commercial Components DL5221 THRU DL5267 omponents 20736 Marilla Street Chatsworth !"# $ % !"# Features * * * * Wide Voltage Range Available Glass Package High Temp Soldering: 260C for 10 Seconds At Terminals Surface Mount Package * Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix designates Compliant. See ordering information) 500 mW Zener Diode 2.4 to 75 Volts Marking : Cathode band denotes polarity Maximum Ratings * * * * * * MINIMELF Operating Temperature: -65C to +175C Storage Temperature: -65C to +175C 500 mWatt DC Power Dissipation Power Derating: 4.0mW/C above 50C Forward Voltage @ 200mA: 1.1 Volts Moisture Sensitivity Level 1 Cathode Mark C Figure 1 - Typical Capacitance 100 B A pf 10 At zero volts At -2 Volts V R DIM A B C 1 0 100 DIMENSIONS 200 VZ INCHES MIN .130 .008 .055 MAX .146 .016 .059 MM MIN 3.30 .20 1.40 MAX 3.70 .40 1.50 NOTE Typical Capacitance (pf) - versus - Zener voltage (VZ) Figure 2 - Derating Curve SUGGESTED SOLDER PAD LAYOUT 0.105 400 mW 0.075" 200 0.030" 0 75 150 175 225 Temperature C Power Dissipation (mW) - Versus - Ambient Temperature C Note:1.Lead in Glass Exemption Applied, see EU Directive Annex 5. Revision: A www.mccsemi.com 1 of 5 2011/01/01 MCC DL5221 thru DL5267 Micro Commercial Components MCC PART NUMBER DL5221 DL5222 DL5223 DL5224 DL5225 DL5226 DL5227 DL5228 DL5229 DL5230 DL5231 DL5232 DL5233 DL5234 DL5235 DL5236 DL5237 DL5238 DL5239 DL5240 DL5241 DL5242 DL5243 DL5244 DL5245 DL5246 DL5247 DL5248 DL5249 DL5250 DL5251 DL5252 DL5253 DL5254 DL5255 DL5256 DL5257 DL5258 DL5259 DL5260 DL5261 DL5262 DL5263 DL5264 DL5265 DL5266 DL5267 NOMINAL ZENER VOLTAGE VZ @ IZT TEST CURRENT I ZT VOLTS mA 2.4 2.5 2.7 2.8 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.0 6.2 6.8 7.5 8.2 8.7 9.1 10 11 12 13 14 15 16 17 18 19 20 22 24 25 27 28 30 33 36 39 43 47 51 56 60 62 68 75 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 9.5 9.0 8.5 7.8 7.4 7.0 6.6 6.2 5.6 5.2 5.0 4.6 4.5 4.2 3.8 3.4 3.2 3.0 2.7 2.5 2.2 2.1 2.0 1.8 1.7 MAXIMUM ZENER IMPEDANCE `B' SUFFIX ONLY Z ZT @ IZT Z ZK @I ZK = 0.25mA OHMS OHMS 30 30 30 30 29 28 24 23 22 19 17 11 7.0 7.0 5.0 6.0 8.0 8.0 10 17 22 30 13 15 16 17 19 21 23 25 29 33 35 41 44 49 58 70 80 93 105 125 150 170 185 230 270 1200 1250 1300 1400 1600 1600 1700 1900 2000 1900 1600 1600 1600 1000 750 500 500 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 700 700 800 900 1000 1100 1300 1400 1400 1600 1700 MAXIMUM REVERSE LEAKAGE CURRENT IR @ VR A VOLTS 100 100 75 75 50 25 15 10 5.0 5.0 5.0 5.0 5.0 5.0 3.0 3.0 3.0 3.0 3.0 3.0 2.0 1.0 0.5 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 2.0 3.0 3.5 4.0 5.0 6.0 6.5 6.5 7.0 8.0 8.4 9.1 9.9 10 11 12 13 14 14 15 17 18 19 21 21 23 25 27 30 33 36 39 43 46 47 52 56 MAX. ZENER VOLTAGE TEMP COEFFICIENT `B' SUFFIX ONLY % / C -0.085 -0.085 -0.080 -0.080 -0.075 -0.070 -0.065 -0.060 0.055 0.030 0.030 +0.038 +0.038 +0.045 +0.050 +0.058 +0.062 +0.065 +0.068 +0.075 +0.076 +0.077 +0.079 +0.082 +0.082 +0.083 +0.084 +0.085 +0.086 +0.086 +0.087 +0.088 +0.089 +0.090 +0.091 +0.091 +0.092 +0.093 +0.094 +0.095 +0.095 +0.096 +0.096 +0.097 +0.097 +0.097 +0.098 NOTE 1: Table as shown lists type numbers, which indicate a tolerance of 20% with guaranteed limits on only Vz, IR, and V F. Devices with guaranteed limits on all six parameters are indicated by suffix " A" for 10%, " B" for 5%, " C" for 2% tolerance NOTE 2: The electrical characteristics are measured after allowing the device to stabilize for 20 seconds. NOTE 3: Temperature coefficient (aVZ). Test conditions for temperature coefficient are as follows: a. IZT = 7.5mA, TI = 25oC T2 = 125oC (DL5221 thru DL5242) b. IZT = Rated IZT , TI = 25oC, T2 = 125oC (DL5243 thru DL5267) Device to be temperature stabilized with current applied prior to reading breakdown voltage at the specified ambient temperature. Revision: A www.mccsemi.com 2 of 5 2011/01/01 TM MCC DL5221 thru DL5267 Characteristics (T j=25 unless otherwise specified) Micro Commercial Components Figure 1. Zener Voltage versus Zener Current - Vz=1 thru 16 Volts Figure 2. Zener Voltage versus Zener Current - Vz=15 thru 30 Volts Revision: A www.mccsemi.com 3 of 5 TM 2011/01/01 MCC DL5221 thru DL5267 Micro Commercial Components Characteristics (T j=25 unless otherwise specified) Figure 3. Zener Voltage versus Zener Current - Vz=30 thru 75 Volts Figure 4. Thermal resistance from junction to ambient as a function of pulse duration Revision: A TM www.mccsemi.com 4 of 5 2011/01/01 MCC TM Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 2.5Kpcs/Reel ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: A 5 of 5 2011/01/01 3