TS3YJ-203-RF7 - VISHAY SFERNICE

TS3

www.vishay.com Vishay Sfernice

Revision: 05-Aug-13 1Document Number: 51041

For technical questions, contact:

sferpottrimmers@vishay.com

, see also Application Note:

www.vishay.com/doc?51001

and

www.vishay.com/doc?52029

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

3 mm Square Surface Mount Miniature Trimmer Single-Turn

Cermet Sealed

FEATURES

• 0.125 W at 70 °C

• Small size for optimum packaging density

• Suitable for both manual and automatic operations

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

DIMENSIONS in millimeters (inches) ± 0.25 mm (± 0.010")

TS3YJ

RECOMMENDED SOLDERING AREAS

2.2 ± 0.2

(0.087 ± 0.008)

0.15

(0.006)

1.3 ± 0.1

(0.051 ± 0.004)

0.66 ± 0.1

(0.026 ± 0.004)

2 places

2.3 ± 0.2

(0.091 ± 0.008)

1.5 ± 0.15

(0.059 ± 0.006)

2 places

1.47 ± 0.15

(0.058 ± 0.006)

Adjustment slot

0.52 (0.020) wide

x 1.93 (0.076) long

x 0.51 (0.020) deep

3.2 + 0.4/- 0.2

(0.126 + 0.016/- 0.008)

3.5 ± 0.2

(0.138 ± 0.008) B

1.6 (0.063)

4.5

(0.177)

0.65

(0.026)

1.1 (0.043)

0.6 (0.024) 0.6 (0.024)

1.1 (0.043)

1.6 (0.063)

TS3

www.vishay.com Vishay Sfernice

Revision: 05-Aug-13 2Document Number: 51041

For technical questions, contact:

sferpottrimmers@vishay.com

, see also Application Note:

www.vishay.com/doc?51001

and

www.vishay.com/doc?52029

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ELECTRICAL SPECIFICATIONS

Resistive element Cermet

Electrical travel 220°

Resistance range 10  to 2 M

Stocked range 1 k to 100 k

Standard series 1 - 2 - 5

Tolerance standard ± 20 %

Circuit diagram

Power rating 0.125 W at 70 °C

Temperature coefficient (max.)  100  ± 150 ppm/°C/> 100  ± 100 ppm/°C

Limiting element voltage (max.) 200 V

Contact resistance variation 3 % or 3 

End resistance 1 % or 3 

Dielectric strength (RMS) 500 V (sea level)

Insulation resistance (500 VDC)100 M

MECHANICAL SPECIFICATIONS

Mechanical travel 250°

Operating torque (max. Ncm) 0.5

End stop torque (min. Ncm) 2

Unit weight (max. g) 0.1

Mechanical life (cycles) 50

ENVIRONMENTAL SPECIFICATIONS

Temperature range - 55 °C to + 125 °C

Sealing Sealed container IP67

MSL level 1

SOLDERING RECOMMENDATIONS

Recommended reflow profile 2, see Application Note www.vishay.com/doc?52029

STANDARD RESISTANCE ELEMENT DATA

RESISTANCE PART MARKING CODE RESISTANCE CODE

10 A1 100

20 21 200

50 51 500

100 A2 101

200 22 201

500 52 501

1K A3 102

2K 23 202

5K 53 502

10K A4 103

20K 24 203

50K 54 503

100K A5 104

200K 25 204

500K 55 504

1M A6 105

2M 26 205

bcw

(2)

(3)

(1)

TS3

www.vishay.com Vishay Sfernice

Revision: 05-Aug-13 3Document Number: 51041

For technical questions, contact:

sferpottrimmers@vishay.com

, see also Application Note:

www.vishay.com/doc?51001

and

www.vishay.com/doc?52029

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PACKAGING

ORDERING INFORMATION (Part Number)

MODEL STYLE OHMIC VALUE TOLERANCE PACKAGING SPECIAL

NUMBER

TS3 YJ From

10  to 2 M

503 = 50 k

M = ± 20 % R15 =

Reel 1000 pieces

(If applicable)

Given by

Vishay

for custom

design

DESCRIPTION (for information only)

TS3 YJ 50K 20 % TR e3

MODEL STYLE VALUE TOLERANCE SPECIAL PACKAGING LEAD FINISH

Ø 13 ± 0.51 Ø 21.01 ± 0.79

Ø 178 ± 2.03

Equal spaced

3 places

1.78 min.

12.40 + 2.00

2.67 ± 0.2

60 ± 2.03

2.5 ± 0.1

4.0 ± 0.1

0.3 ± 0.1

5.52 ± 0.18

3.8 ± 0.2

1.5 ± 0.2

1.5 ± 0.1

2.0 ± 0.1

4.0 ± 0.1

1.75 ± 0.1

12 ± 0.2

Reel of 1000 pieces

1550 M3RJS3YT

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 02-Oct-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free

requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference

to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21

conform to JEDEC JS709A standards.