EZ-LIGHTTM Indicators - Daylight Visible Datasheet E* PI GT A I L * P UR E QPMA A BL EU RO YL Intense levels of light output for outdoor applications Controlled field of view for signage and narrow lane use May also be used for low-cost vision sensor illumination Rugged, cost-effective, and easy to install Compact devices are completely self-contained - no controller needed Up to three colors in one housing Immune to ambient light, EMI, and RFI interference 50 mm diameter with flat profile and 30 mm mounting base PNP (sourcing) or NPN (sinking) input type, depending on model 15 to 30 V dc operation *C -S T * * * * * * * * * * Contact Factory for more information CA L L F A CT O RY NOTE: Optional sun shield model K50DS is available for enhanced visibility in desert sun brightness levels (see Sun Shield on page 4). Model 1 LED Function 2 K50LDGRYPQ 3 Color: Green, Red, Yellow K50LDGRYNQ K50LDGRBPQ K50LDGRBNQ 3 Color: Green, Red, Blue Inputs 3 Model* LED Function 2 Inputs 3 PNP K50LDXGXPQ 1 Color: Green PNP/NPN NPN K50LDXRXPQ 1 Color: Red PNP/NPN PNP K50LDXYXPQ 1 Color: Yellow PNP/NPN NPN K50LDXWXPQ 1 Color: White PNP/NPN K50LDXBXPQ 1 Color: Blue PNP/NPN Contact factory for other colors and color combinations. WARNING: Not To Be Used for Personnel Protection Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. 1 Integral QD models only are listed. * To order the 150 mm PVC pigtail with QD model, replace Q with QP in model number (example, K50LDGRYPQP). * To order the 2 m (6.5 ft) cable model, omit suffix Q from model number (example, K50LDGRYP). * A model with a QD requires a mating cable (see 4-pin Euro-Style Cordsets). 2 3-color models: 6 LEDs per color; 1-color models: 18 LEDs per color 3 1-color models are PNP/NPN selectable, depending on hookup. Original Document 137330 Rev. B 9 February 2015 137330 EZ-LIGHTTM Indicators - Daylight Visible Specifications Supply Voltage and Current 15 to 30 V dc at 120 mA maximum (1-color models) 15 to 30 V dc at 40 mA maximum per LED color (3-color models) 12 V dc minimum voltage to -20 C for both models Environmental Rating Fully encapsulated, rated IEC IP67 Supply Protection Circuitry Protected against reverse polarity and transient voltages Connections Integral 4-pin M12/Euro-style quick disconnect fitting, 150 mm PVC pigtail with QD, or 2 m (6.5 ft) integral cable, depending on model Indicators LED colors are independently selected, depending on mode Input Response Time Indicator ON/OFF: 1 ms maximum Construction Base and covers: polycarbonate Operating Conditions -40 C to +50 C (-40 F to +122 F) 90% at +55 C maximum relative humidity (non-condensing) Certifications Dimensions O50 mm (1.97") 49.5 mm (1.95") 13 mm (0.51") 20 mm (0.79") 11 mm (0.43") M30 x 1.5 (mounting nut included) max. torque 4.5 Nm (40 lbs/in.) Internal Threads 1/2- 14 NPSM M12 x 1 Percent of Maximum Intensity vs Viewing Angle X: Viewing Angle (Deg) Y: Intensity (Percent) 2 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 137330 Rev. B EZ-LIGHTTM Indicators - Daylight Visible Wiring - 1-Color Models Sourcing (PNP) Input Sinking (NPN) Input 15-30V dc 1 C 2 4 1 = Brown 1 3 15-30V dc 3 C X 3 = Blue C = Indicator Color (Green, Red, Yellow, White or Blue) 4 X 2 = White 4 = Black 2 X Key: X X = Not Used NOTE: 1-color models are PNP/NPN selectable Wiring - 3-Color Models Sinking (NPN) Input Sourcing (PNP) Input Key: 1 = Brown Indicator Color B Y or 2 = White 15-30V dc 3 = Blue 4 = Black 3 R 2 1 4 G 1 R or Indicator Color 15-30V dc 4 G Y 3 B G = Green R = Red 2 Y = Yellow B = Blue Accessories 4-Pin Threaded M12/Euro-Style Cordsets Model Length MQDC-406 1.83 m (6 ft) MQDC-415 4.57 m (15 ft) MQDC-430 9.14 m (30 ft) MQDC-450 15.2 m (50 ft) MQDC-406RA 1.83 m (6 ft) MQDC-415RA 4.57 m (15 ft) MQDC-430RA 9.14 m (30 ft) Style Dimensions 44 Typ. Straight M12 x 1 o 14.5 P/N 137330 Rev. B 15.2 m (50 ft) 2 1 3 4 32 Typ. [1.26"] 30 Typ. [1.18"] Right-Angle MQDC-450RA Pinout (Female) 1 2 3 4 = = = = Brown White Blue Black M12 x 1 o 14.5 [0.57"] www.bannerengineering.com - Tel: +1-763-544-3164 3 EZ-LIGHTTM Indicators - Daylight Visible Mounting Brackets SMB30A * Right-angle bracket with curved slot for versatile orientation * Clearance for M6 (1/4 in) hardware * Mounting hole for 30 mm sensor * 12-ga. stainless steel 45 C 61 B A 69 Hole center spacing: A to B=40 Hole size: A=o 6.3, B= 27.1 x 6.3, C=o 30.5 C 53 A B 48 A 93 67 SMB30SC * Swivel bracket with 30 mm mounting hole for sensor * Black reinforced thermoplastic polyester * Stainless steel mounting and swivel locking hardware included C B Hole center spacing: A=26.0, A to B=13.0 Hole size: A=26.8 x 7.0, B=o 6.5, C=o 31.0 SMB30MM * 12-ga. stainless steel bracket with curved mounting slots for versatile orientation * Clearance for M6 (1/4 in) hardware * Mounting hole for 30 mm sensor 45 Hole center spacing: A=26.0, A to B=13.0 Hole size: A=26.8 x 7.0, B=o 6.5, C=o 31.0 45 SMBAMS30P * Flat SMBAMS series bracket * 30 mm hole for mounting sensors * Articulation slots for 90+ rotation * 12-ga. 300 series stainless steel SMBAMS30RA * Right-angle SMBAMS series bracket * 30 mm hole for mounting sensors * Articulation slots for 90+ rotation * 12-ga. (2.6 mm) cold-rolled steel B 58 29 A Hole center spacing: A=o 50.8 Hole size: A=o 7.0, B=o 30.0 57 70 C 57 B A SMB3018SC * 18 mm swivel side or barrel-mount bracket * Black reinforced thermoplastic polyester * Stainless steel swivel locking hardware included 67 B 59 29 Hole center spacing: A = 51, A to B = 25.4 Hole size: A = 42.6 x 7, B = o 6.4, C = o 30.1 A Hole center spacing: A = 50.8 Hole size: A = o 7.0, B = o 18.0 Sun Shield K50DS * * 4 Use for enhanced visibility in desert sun brightness levels Thermoplastic polyester www.bannerengineering.com - Tel: +1-763-544-3164 P/N 137330 Rev. B EZ-LIGHTTM Indicators - Daylight Visible Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. www.bannerengineering.com - Tel: +1-763-544-3164