Datasheet
QPMA
E
U
R
O
-
S
T
Y
L
E
•
P
I
G
T
A
I
L
•
P
U
R
•
C
A
B
L
E
C
A
L
L
F
A
C
T
O
R
Y
Contact Factory for more
information
• Intense levels of light output for outdoor applications
• Controlled field of view for signage and narrow lane use
• May also be used for low-cost vision sensor illumination
• Rugged, cost-effective, and easy to install
• Compact devices are completely self-contained - no controller needed
• Up to three colors in one housing
• Immune to ambient light, EMI, and RFI interference
• 50 mm diameter with flat profile and 30 mm mounting base
• PNP (sourcing) or NPN (sinking) input type, depending on model
• 15 to 30 V dc operation
NOTE: Optional sun shield model K50DS is available for enhanced visibility in desert sun brightness
levels (see Sun Shield on page 4).
Model 1LED Function 2Inputs 3
K50LDGRYPQ 3 Color:
Green, Red, Yellow PNP
K50LDGRYNQ NPN
K50LDGRBPQ 3 Color:
Green, Red, Blue PNP
K50LDGRBNQ NPN
Contact factory for other colors and color combinations.
Model* LED Function 2Inputs 3
K50LDXGXPQ 1 Color: Green PNP/NPN
K50LDXRXPQ 1 Color: Red PNP/NPN
K50LDXYXPQ 1 Color: Yellow PNP/NPN
K50LDXWXPQ 1 Color: White PNP/NPN
K50LDXBXPQ 1 Color: Blue PNP/NPN
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
1Integral QD models only are listed.
• To order the 150 mm PVC pigtail with QD model, replace Q with QP in model number (example, K50LDGRYPQP).
• To order the 2 m (6.5 ft) cable model, omit suffix Q from model number (example, K50LDGRYP).
• A model with a QD requires a mating cable (see 4-pin Euro-Style Cordsets).
23-color models: 6 LEDs per color; 1-color models: 18 LEDs per color
31-color models are PNP/NPN selectable, depending on hookup.
EZ-LIGHT™ Indicators - Daylight Visible
Original Document
137330 Rev. B 9 February 2015
137330
Specifications
Supply Voltage and Current
15 to 30 V dc at 120 mA maximum (1-color models)
15 to 30 V dc at 40 mA maximum per LED color (3-color models)
12 V dc minimum voltage to –20 °C for both models
Supply Protection Circuitry
Protected against reverse polarity and transient voltages
Indicators
LED colors are independently selected, depending on mode
Input Response Time
Indicator ON/OFF: 1 ms maximum
Environmental Rating
Fully encapsulated, rated IEC IP67
Construction
Base and covers: polycarbonate
Connections
Integral 4-pin M12/Euro-style quick disconnect fitting, 150 mm PVC
pigtail with QD, or 2 m (6.5 ft) integral cable, depending on model
Operating Conditions
−40 °C to +50 °C (−40 °F to +122 °F)
90% at +55 °C maximum relative humidity (non-condensing)
Certifications
Dimensions
49.5 mm
(1.95")
M12 × 1
M30 × 1.5
(mounting nut included)
max. torque 4.5 Nm (40 lbs/in.)
Ø50 mm (1.97")
13 mm
(0.51")
11 mm
(0.43")
20 mm
(0.79")
Internal Threads
½- 14 NPSM
Percent of Maximum Intensity vs Viewing Angle
X: Viewing Angle (Deg)
Y: Intensity (Percent)
EZ-LIGHT™ Indicators - Daylight Visible
2 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 137330 Rev. B
Wiring – 1-Color Models
Sourcing (PNP) Input Sinking (NPN) Input Key:
3
1
2
4
15-30V dc
X
X
C
1
3
2
4
15-30V dc
X
X
C
1 = Brown
2 = White
3 = Blue
4 = Black
C = Indicator Color
(Green, Red, Yellow,
White or Blue)
X = Not Used
NOTE: 1-color models are PNP/NPN selectable
Wiring – 3-Color Models
Sourcing (PNP) Input Sinking (NPN) Input Key:
3
4
1
2
Indicator
Color
15-30V dc
G
R
YB
or
1
4
3
2
Indicator
Color
R
Y
G
15-30V dc
B
or
1 = Brown
2 = White
3 = Blue
4 = Black
G = Green
R = Red
Y = Yellow
B = Blue
Accessories
4-Pin Threaded M12/Euro-Style Cordsets
Model Length Style Dimensions Pinout (Female)
MQDC-406 1.83 m (6 ft)
Straight
44 Typ.
ø 14.5
M12 x 1
2
3
4
1
1 = Brown
2 = White
3 = Blue
4 = Black
MQDC-415 4.57 m (15 ft)
MQDC-430 9.14 m (30 ft)
MQDC-450 15.2 m (50 ft)
MQDC-406RA 1.83 m (6 ft)
Right-Angle
32 Typ.
[1.26"]
30 Typ.
[1.18"]
ø 14.5 [0.57"]
M12 x 1
MQDC-415RA 4.57 m (15 ft)
MQDC-430RA 9.14 m (30 ft)
MQDC-450RA 15.2 m (50 ft)
EZ-LIGHT™ Indicators - Daylight Visible
P/N 137330 Rev. B www.bannerengineering.com - Tel: +1-763-544-3164 3
Mounting Brackets
SMB30A
• Right-angle bracket with
curved slot for versatile
orientation
• Clearance for M6 (¼ in)
hardware
• Mounting hole for 30 mm
sensor
• 12-ga. stainless steel
45
61
69
A
B
C
Hole center spacing: A to B=40
Hole size: A=ø 6.3, B= 27.1 x 6.3, C=ø 30.5
SMBAMS30RA
• Right-angle SMBAMS series
bracket
• 30 mm hole for mounting
sensors
• Articulation slots for 90°+
rotation
• 12-ga. (2.6 mm) cold-rolled
steel
53
48
45
A
C
B
Hole center spacing: A=26.0, A to B=13.0
Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0
SMBAMS30P
• Flat SMBAMS series bracket
• 30 mm hole for mounting
sensors
• Articulation slots for 90°+
rotation
• 12-ga. 300 series stainless
steel
45
93 A
C
B
Hole center spacing: A=26.0, A to B=13.0
Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0
SMB30SC
• Swivel bracket with 30 mm
mounting hole for sensor
• Black reinforced
thermoplastic polyester
• Stainless steel mounting and
swivel locking hardware
included
67
58
29
B
A
Hole center spacing: A=ø 50.8
Hole size: A=ø 7.0, B=ø 30.0
SMB30MM
• 12-ga. stainless steel bracket
with curved mounting slots
for versatile orientation
• Clearance for M6 (¼ in)
hardware
• Mounting hole for 30 mm
sensor
70
57
A
B
C
57
Hole center spacing: A = 51, A to B = 25.4
Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1
SMB3018SC
• 18 mm swivel side or
barrel-mount bracket
• Black reinforced
thermoplastic polyester
• Stainless steel swivel
locking hardware
included
B
A
67
59
29
Hole center spacing: A = 50.8
Hole size: A = ø 7.0, B = ø 18.0
Sun Shield
K50DS
• Use for enhanced visibility in desert sun brightness levels
• Thermoplastic polyester
EZ-LIGHT™ Indicators - Daylight Visible
4 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 137330 Rev. B
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp.
will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty
period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE
OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE
LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER
ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product
previously manufactured by Banner Engineering Corp.
EZ-LIGHT™ Indicators - Daylight Visible
www.bannerengineering.com - Tel: +1-763-544-3164
