NVMFS5C670NL MOSFET - Power, Single N-Channel 60 V, 6.1 mW, 71 A Features * * * * * * Small Footprint (5x6 mm) for Compact Design Low RDS(on) to Minimize Conduction Losses Low QG and Capacitance to Minimize Driver Losses NVMFS5C670NLWF - Wettable Flank Option for Enhanced Optical Inspection AEC-Q101 Qualified and PPAP Capable These Devices are Pb-Free and are RoHS Compliant www.onsemi.com V(BR)DSS RDS(ON) MAX 6.1 mW @ 10 V 60 V D (5,6) Symbol Value Unit Drain-to-Source Voltage VDSS 60 V Gate-to-Source Voltage VGS 20 V ID 71 A Continuous Drain Current RqJC (Notes 1, 3) TC = 25C Power Dissipation RqJC (Note 1) Continuous Drain Current RqJA (Notes 1, 2, 3) Steady State TC = 100C TC = 25C TC = 100C TA = 25C Power Dissipation RqJA (Notes 1 & 2) Pulsed Drain Current Steady State W 61 31 ID TA = 100C TA = 25C A 17 MARKING DIAGRAM PD W 3.6 1 1.8 IDM 440 A TJ, Tstg -55 to + 175 C IS 68 A Single Pulse Drain-to-Source Avalanche Energy (IL(pk) = 3.6 A) EAS 166 mJ Lead Temperature for Soldering Purposes (1/8 from case for 10 s) TL 260 C Operating Junction and Storage Temperature Source Current (Body Diode) S (1,2,3) N-CHANNEL MOSFET 12 TA = 100C TA = 25C, tp = 10 ms G (4) 50 PD 71 A 8.8 mW @ 4.5 V MAXIMUM RATINGS (TJ = 25C unless otherwise noted) Parameter ID MAX Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. DFN5 (SO-8FL) CASE 488AA STYLE 1 D S S S G D XXXXXX AYWZZ D D XXXXXX = 5C670L XXXXXX = (NVMFS5C670NL) or XXXXXX = 670LWF XXXXXX = (NVMFS5C670NLWF) A = Assembly Location Y = Year W = Work Week ZZ = Lot Traceability THERMAL RESISTANCE MAXIMUM RATINGS Parameter Symbol Value Unit Junction-to-Case - Steady State RqJC 2.4 C/W Junction-to-Ambient - Steady State (Note 2) RqJA 41 ORDERING INFORMATION See detailed ordering, marking and shipping information on page 5 of this data sheet. 1. The entire application environment impacts the thermal resistance values shown, they are not constants and are only valid for the particular conditions noted. 2. Surface-mounted on FR4 board using a 650 mm2, 2 oz. Cu pad. 3. Maximum current for pulses as long as 1 second is higher but is dependent on pulse duration and duty cycle. (c) Semiconductor Components Industries, LLC, 2016 July, 2019 - Rev. 3 1 Publication Order Number: NVMFS5C670NL/D NVMFS5C670NL ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise specified) Parameter Symbol Test Condition Min Drain-to-Source Breakdown Voltage V(BR)DSS VGS = 0 V, ID = 250 mA 60 Drain-to-Source Breakdown Voltage Temperature Coefficient V(BR)DSS/ TJ Typ Max Unit OFF CHARACTERISTICS Zero Gate Voltage Drain Current IDSS Gate-to-Source Leakage Current V 27 VGS = 0 V, VDS = 60 V mV/C TJ = 25 C 10 TJ = 125C 250 IGSS VDS = 0 V, VGS = 20 V VGS(TH) VGS = VDS, ID = 53 mA 100 mA nA ON CHARACTERISTICS (Note 4) Gate Threshold Voltage Threshold Temperature Coefficient VGS(TH)/TJ Drain-to-Source On Resistance Forward Transconductance RDS(on) 1.2 2.0 -4.7 VGS = 10 V ID = 35 A 5.1 6.1 VGS = 4.5 V ID = 35 A 7.0 8.8 gFS VDS = 15 V, ID = 35 A V mV/C 82 mW S CHARGES AND CAPACITANCES Input Capacitance CISS Output Capacitance COSS Reverse Transfer Capacitance CRSS 1400 VGS = 0 V, f = 1 MHz, VDS = 25 V 690 pF 15 Total Gate Charge QG(TOT) VGS = 4.5 V, VDS = 48 V; ID = 35 A 9.0 nC Total Gate Charge QG(TOT) VGS = 10 V, VDS = 48 V; ID = 35 A 20 nC Threshold Gate Charge QG(TH) 2.5 Gate-to-Source Charge QGS Gate-to-Drain Charge QGD Plateau Voltage VGP 3.1 td(ON) 11 VGS = 10 V, VDS = 48 V; ID = 35 A 4.5 nC 2.0 V SWITCHING CHARACTERISTICS (Note 5) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time tr td(OFF) VGS = 4.5 V, VDS = 48 V, ID = 35 A, RG = 2.5 W tf 60 ns 15 4 DRAIN-SOURCE DIODE CHARACTERISTICS Forward Diode Voltage Reverse Recovery Time Charge Time Discharge Time Reverse Recovery Charge VSD VGS = 0 V, IS = 35 A TJ = 25C 0.9 TJ = 125C 0.8 tRR ta tb 1.2 V 34 VGS = 0 V, dIS/dt = 100 A/ms, IS = 35 A QRR 17 ns 17 19 nC Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 4. Pulse Test: pulse width v 300 ms, duty cycle v 2%. 5. Switching characteristics are independent of operating junction temperatures. www.onsemi.com 2 NVMFS5C670NL TYPICAL CHARACTERISTICS 3.8 V 100 80 3.4 V 60 40 3.0 V 20 RDS(on), DRAIN-TO-SOURCE RESISTANCE (mW) 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 60 TJ = 25C 40 4.0 TJ = 125C 0 0.5 1.0 1.5 2.0 TJ = -55C 2.5 3.0 3.5 VDS, DRAIN-TO-SOURCE VOLTAGE (V) VGS, GATE-TO-SOURCE VOLTAGE (V) Figure 1. On-Region Characteristics Figure 2. Transfer Characteristics 14 TJ = 25C ID = 35 A 13 12 11 10 9 8 7 6 3.5 80 0 15 5 100 20 2.6 V 0 VDS = 5 V 120 RDS(on), DRAIN-TO-SOURCE RESISTANCE (mW) ID, DRAIN CURRENT (A) 120 140 4.5 V 6.5 V to 10 V ID, DRAIN CURRENT (A) 140 4.5 5.5 6.5 7.5 8.5 9.5 VGS, GATE VOLTAGE (V) 4.0 10 TJ = 25C 9 8 VGS = 4.5 V 7 6 VGS = 10 V 5 4 5 15 25 35 45 55 65 75 ID, DRAIN CURRENT (A) Figure 3. On-Resistance vs. Gate-to-Source Voltage Figure 4. On-Resistance vs. Drain Current and Gate Voltage 100000 1.8 VGS = 10 V ID = 35 A TJ = 175C IDSS, LEAKAGE (nA) RDS(on), NORMALIZED DRAIN-TO- SOURCE RESISTANCE 2.0 1.6 1.4 1.2 1.0 10000 TJ = 125C 1000 TJ = 85C 100 0.8 0.6 -50 -25 0 25 50 75 100 125 150 175 10 10 20 30 40 50 TJ, JUNCTION TEMPERATURE (C) VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 5. On-Resistance Variation with Temperature Figure 6. Drain-to-Source Leakage Current vs. Voltage www.onsemi.com 3 60 NVMFS5C670NL TYPICAL CHARACTERISTICS VGS, GATE-TO-SOURCE VOLTAGE (V) C, CAPACITANCE (pF) 10000 CISS 1000 COSS 100 CRSS 10 1 VGS = 0 V TJ = 25C f = 1 MHz 0 10 20 30 40 50 60 10 QT 9 8 7 6 5 4 QGD QGS 3 VDS = 48 V TJ = 25C ID = 35 A 2 1 0 0 2 4 6 8 10 12 14 16 18 VDS, DRAIN-TO-SOURCE VOLTAGE (V) QG, TOTAL GATE CHARGE (nC) Figure 7. Capacitance Variation Figure 8. Gate-to-Source and Drain-to-Source Voltage vs. Total Charge 20 t, TIME (ns) 100 IS, SOURCE CURRENT (A) 1000 tr td(on) td(off) 10 VGS = 4.5 V VDS = 48 V ID = 35 A tf 1 ID, DRAIN CURRENT (A) 1000 100 10 TJ = -55C 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 VSD, SOURCE-TO-DRAIN VOLTAGE (V) Figure 9. Resistive Switching Time Variation vs. Gate Resistance Figure 10. Diode Forward Voltage vs. Current 100 TC = 25C VGS 10 V Single Pulse 10 10 ms 0.1 0.1 TJ = 25C RG, GATE RESISTANCE (W) 500 ms 1 10 1 100 IPEAK, DRAIN CURRENT (A) 1 TJ = 125C RDS(on) Limit Thermal Limit Package Limit 1 1 ms 10 TJ = 25C TJ = 100C 1 0.1 10 100 1E-5 1E-4 1E-3 1E-2 VDS (V) TIME IN AVALANCHE (s) Figure 11. Maximum Rated Forward Biased Safe Operating Area Figure 12. Maximum Drain Current vs. Time in Avalanche www.onsemi.com 4 NVMFS5C670NL TYPICAL CHARACTERISTICS 100 R(t) (C/W) 50% Duty Cycle 10 20% 10% 5% 1 2% 1% 0.1 0.01 0.000001 Single Pulse 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 PULSE TIME (sec) Figure 13. Thermal Characteristics DEVICE ORDERING INFORMATION Device Marking Package Shipping NVMFS5C670NLT1G 5C670L DFN5 (Pb-Free) 1500 / Tape & Reel NVMFS5C670NLWFT1G 670LWF DFN5 (Pb-Free, Wettable Flanks) 1500 / Tape & Reel NVMFS5C670NLT3G 5C670L DFN5 (Pb-Free) 5000 / Tape & Reel NVMFS5C670NLWFT3G 670LWF DFN5 (Pb-Free, Wettable Flanks) 5000 / Tape & Reel NVMFS5C670NLAFT1G 5C670L DFN5 (Pb-Free) 1500 / Tape & Reel NVMFS5C670NLWFAFT1G 670LWF DFN5 (Pb-Free, Wettable Flanks) 1500 / Tape & Reel NVMFS5C670NLWFAFT3G 670LWF DFN5 (Pb-Free, Wettable Flanks) 5000 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. www.onsemi.com 5 NVMFS5C670NL PACKAGE DIMENSIONS DFN5 5x6, 1.27P (SO-8FL) CASE 488AA ISSUE M 2X 0.20 C D 2 A B D1 2X 0.20 C 3 q E 2 2 c A1 4 TOP VIEW C A RECOMMENDED SOLDERING FOOTPRINT* 0.10 C SIDE VIEW 8X b C A B 0.05 c SEATING PLANE DETAIL A 0.10 C 0.10 DIM A A1 b c D D1 D2 E E1 E2 e G K L L1 M q 4X E1 1 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION D1 AND E1 DO NOT INCLUDE MOLD FLASH PROTRUSIONS OR GATE BURRS. 2X DETAIL A 0.495 4.560 2X 1.530 STYLE 1: PIN 1. SOURCE 2. SOURCE 3. SOURCE 4. GATE 5. DRAIN e/2 e L 1 3.200 4 4.530 K PIN 5 (EXPOSED PAD) MILLIMETERS MIN NOM MAX 0.90 1.00 1.10 0.00 --- 0.05 0.33 0.41 0.51 0.23 0.28 0.33 5.00 5.30 5.15 4.70 4.90 5.10 3.80 4.00 4.20 6.00 6.30 6.15 5.70 5.90 6.10 3.45 3.65 3.85 1.27 BSC 0.51 0.575 0.71 1.20 1.35 1.50 0.51 0.575 0.71 0.125 REF 3.00 3.40 3.80 0_ --- 12 _ E2 L1 M 1.330 2X 0.905 1 0.965 G 4X D2 1.000 4X 0.750 BOTTOM VIEW 1.270 PITCH DIMENSIONS: MILLIMETERS *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NVMFS5C670NL/D/D