34
PRODUCT CATALOGUE - STEGO
TECHNICAL DATA
Heating element PTC resistor – temperature limiting
Surface temperature max. +80 °C (+176 °F), except upper protective grille
at +20 °C (+68 °F) ambient temperature
Temperature safety cut-out to protect against overheating in case of fan failure, automatic reset
Axial fan, ball bearing air flow 63 m³/h, free flow
service life 50,000 h (L10) at 25 °C (77 °F)
Connection male power insert connector according to IEC320 C18
Casing plastic according to UL94 V-0, black
Mounting clip for 35 mm DIN rail, EN 60715 or
screw fixing (M5), tightening torque 2 Nm max.
Fitting position airflow direction up
Dimensions 152.5 x 88 x 66 mm
Weight approx. 0.5 kg
Operation/Storage temperature -40 to +60 °C (-40 to +140 °F) / -40 to +70 °C (-40 to +158 °F)
Operation/Storage humidity max. 90 % RH (non-condensing)
Protection type/Protection class IP20 / II (double insulated)
Approvals VDE, UL File No. E234324, EAC
Important note: Connectors and cables for electrical connection are not included in the delivery. Connection cables can be ordered
separately, see Accessories.
HIGH-PERFORMANCE FAN HEATER (SEMICONDUCTOR)
CS 032 / CSF 032 | 1,000 W
The compact high performance fan heater prevents formation of condensation and frost and provides an evenly
distributed interior air temperature in enclosures with electric/electronic components. The plastic housing provides
double insulation and acts as protection against contact. Two screw connectors at the front of CS 032 allow
comfortable wiring of an external thermostat. The CSF 032 is equipped with a pre-set thermostat. Both models
were designed for wall fixing. A fan heater for fixing on the bottom of the enclosure is available on request.
> Compact and slim design
> High heating performance
> Double insulated
> With or without thermostat
> Quick connection
Art. No. Clip fixing Art. No. Screw fixing Operating voltage Heating capacity¹ Inrush current max.
03209.0-00 03209.0-01 AC 220 – 240 V, 50/60 Hz 1,000 W 12.0 A
03209.9-00 03209.9-01 AC 100 – 120 V, 50/60 Hz 1,000 W 18.0 A
Fan heater CS 032
Fan heater CSF 032
FAN HEATER CS 032 (WITHOUT THERMOSTAT)
FAN HEATER CSF 032 (WITH THERMOSTAT)
Art. No. Clip fixing Art. No. Screw fixing Operating voltage Heating capacity¹ Inrush current max. Switch-off temperature² Switch-on temperature²
03201.0-00 03201.0-01 AC 220 – 240 V, 50/60 Hz 1,000 W 12.0 A +25 °C (+77 °F) +15 °C (+59 °F)
03202.0-00 03202.0-01 AC 220 – 240 V, 50/60 Hz 1,000 W 12.0 A +15 °C (+59 °F) +5 °C (+41 °F)
03201.9-00 03201.9-01 AC 100 – 120 V, 50/60 Hz 1,000 W 18.0 A +25 °C (+77 °F) +15 °C (+59 °F)
03202.9-00 03202.9-01 AC 100 – 120 V, 50/60 Hz 1,000 W 18.0 A +15 °C (+59 °F) +5 °C (+41 °F)
¹ at +25 °C (+77 °F) ambient temperature; ² tolerance ±5 K
Note: Other switch-off and switch-on temperatures on request.
HEATING
www.stego.de | www.stego.co.uk | www.stegonorden.se
34TECHNICAL DATASHEET
25.01.2021 | Specifications are subject to change without notice. Errors and omissions excepted. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application.
35
STEGO - PRODUCT CATALOGUE
View: back side
CSF 032 Fan Heater with Integrated ThermostatCS 032 Fan Heater
Screw fixing Clip fixing
Heating capacity / Ambient temperature diagram
Temperature ( °C)
Heating capacity (W)
Photo: Retaining Clip art. no. 237009 in built-in state
ACCESSORIES
Connection cable with female power insert connector according IEC320 C17
Retaining Clip
Art. No. Note
237009 Suitable for female power insert connector on connection cable 244379 and 244380
TECHNICAL DRAWING
Art. No. Length (L)
244379 1.0 m
244380 2.0 m
HEATING
www.stego.de | www.stego.co.uk | www.stegonorden.se
35
TECHNICAL DATASHEET
25.01.2021 | Specifications are subject to change without notice. Errors and omissions excepted. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application.