PA2010 / SMPA2010 Cascadable Amplifier 200 to 2000 MHz Rev. V2 Features * * * * Product Image HIGH OUTPUT POWER: +25.5 dBm (TYP.) HIGH THIRD ORDER IP3: +33 dBm (TYP.) MODERATE NOISE FIGURE: 5.0 dBm (TYP.) LOW VSWR: 1.5:1 (TYP.) Description The PA2010 power amplifier is a discrete hybrid design, which uses thin film manufacturing processes for accurate performance and high reliability. This single stage GaAs FET feedback amplifier design displays impressive performance characteristics over a broadband frequency range. Both TO-8 and Surface Mount packages are hermetically sealed, and MIL-STD-883 environmental screening is available. Ordering Information Part Number Package PA2010 TO-8 SMPA2010 Surface Mount MAAP-008326-CP2010 SMA Connectorized ** ** The connectorized version is not RoHs compliant. Absolute Maximum Ratings Electrical Specifications: Z0 = 50, VCC = +15 VDC Typical Parameter Guaranteed Parameter Absolute Maximum Units 25C 0 to 50C -54 to +85C* Storage Temperature -62C to +150C Frequency GHz 0.2-2.4 0.2-2.0 0.2-2.0 Case Temperature +85C Small Signal Gain (min) dB 10.0 9.0 8.5 DC Voltage +17 V Gain Flatness (max) dB 0.3 0.7 1.0 Continuous Input Power +17 dBm Reverse Isolation dB 20 Short Term Input power (1 minute max.) 100 mW Noise Figure (max) dB 5.5 6.5 7.0 Peak Power (3 sec max.) 0.5 W Power Output @ 1 dB comp. (min) +85C dBm 25.5 23.5 23.0 "S" Series Burn-In Temperature (case) IP3 dBm +33 IP2 dBm +50 Second Order Harmonic IP dBm +55 VSWR Input / Output (max) DC Current @ 15 Volts (max) mA Thermal Data: VCC = +15 VDC Parameter Rating Thermal Resistance jc 50C/W 1.8:1 / 1.5:1 1.9:1 / 1.7:1 2.0:1 / 1.8:1 Transistor Power Dissipation Pd 1.25 W 179 187 189 Junction Temperature Rise Above Case Tjc +63C * Over temperature performance limits for part number CPA2010, guaranteed from 0oC to +50oC only. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. PA2010 / SMPA2010 Cascadable Amplifier 200 to 2000 MHz Rev. V2 Outline Drawing: TO-8 * Typical Performance Curves at +25C WEIGHT: 1 gram (0.04 oz.) max Outline Drawing: Surface Mount * WEIGHT: 1 gram (0.04 oz.) max Outline Drawing: SMA Connectorized * WEIGHT: 19 grams (0.67 oz.) max Dimensions are inches (millimeters) 0.015 (0.38) unless otherwise specified. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.