SMPA2010 - M/A-COM Technology Solutions, Inc.

Cascadable Amplifier

200 to 2000 MHz

Rev. V2

PA2010 / SMPA2010

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Features

• HIGH OUTPUT POWER: +25.5 dBm (TYP.)

• HIGH THIRD ORDER IP3: +33 dBm (TYP.)

• MODERATE NOISE FIGURE: 5.0 dBm (TYP.)

• LOW VSWR: 1.5:1 (TYP.)

Description

The PA2010 power amplifier is a discrete hybrid design, which

uses thin film manufacturing processes for accurate

performance and high reliability.

This single stage GaAs FET feedback amplifier design

displays impressive performance characteristics over a

broadband frequency range.

Both TO-8 and Surface Mount packages are hermetically

sealed, and MIL-STD-883 environmental screening is avail-

able.

Electrical Specifications: Z0 = 50Ω, VCC = +15 VDC

Parameter Typical Guaranteed

25ºC 0º to 50ºC -54º to +85ºC*

Frequency GHz 0.2-2.4 0.2-2.0 0.2-2.0

Small Signal Gain (min) dB 10.0 9.0 8.5

Gain Flatness (max) dB ±0.3 ±0.7 ±1.0

Reverse Isolation dB 20

Noise Figure (max) dB 5.5 6.5 7.0

Power Output

@ 1 dB comp. (min) dBm 25.5 23.5 23.0

IP3 dBm +33

IP2 dBm +50

Second Order Harmonic IP dBm +55

VSWR Input / Output (max) 1.8:1 / 1.5:1 1.9:1 / 1.7:1 2.0:1 / 1.8:1

DC Current @ 15 Volts (max) mA 179 187 189

Units

Product Image

Ordering Information

Part Number Package

PA2010 TO-8

SMPA2010 Surface Mount

MAAP-008326-CP2010 SMA Connectorized **

Absolute Maximum Ratings

Parameter Absolute

Maximum

Storage Temperature -62ºC to +150ºC

Case Temperature +85ºC

DC Voltage +17 V

Continuous Input Power +17 dBm

Short Term Input power

(1 minute max.) 100 mW

Peak Power (3 µsec max.) 0.5 W

“S” Series Burn-In

Temperature (case) +85ºC

Thermal Data: VCC = +15 VDC

Parameter Rating

Thermal Resistance θjc 50ºC/W

Transistor Power Dissipation Pd 1.25 W

Junction Temperature Rise

Above Case Tjc +63ºC

* Over temperature performance limits for part number CPA2010, guaranteed from 0oC to +50oC only.

** The connectorized version is not RoHs compliant.