P Series
Approvals
•Tested acc. to DIN EN 61984
•UL/CSA metallic connectors
Features
•Variable cable clamp (Ø 9-25mm)
•Termination cross section up to 16 mm2(65A)
•Plug and receptacle with “contact click-in
function” insulator to reduce assembly time
•Plastic shell plug (PPCM) for lower cost applications
•Earth connection
•Higher current applications
Advantages
•Low contact resistance
•High current and voltage ratings
•Saving overall weight and space
•Shock and vibration proof
•In the most demanding environments
•Ensuring failure free performance
•Low mating force
•Long life and low rate of wear
•Minimising servicing requirements
•Reducing ownership costs
•UL certification avaible. Contact the factory for
relevant part numbers
Markets
Press lines, punching machines, servo drives
M40 Size 1.5/Size 1.5i Power Connectors
527
MARCH 2005
Technical Characteristics
Number of ways:
Contact diameter:
Nominal current (VDE) / 20°C:
Nominal current (UL):
Nominal current (CSA):
Contact resistance:
Connector life cycle
Test voltage (kV):
Nominal voltage (VDE):
Nominal voltage (UL):
Nominal voltage (CSA):
Operating temperature range (VDE):
Operating temperature range (UL/CSA):
Storage conditions:
Insulation resistance
Insulator material
Contacts: a) material; b) plating
Shell: a) material, b) plating
Seals:
IP code:
Contamination level:
Over voltage category:
Installation altitude:
6way, 8way
6way (4 x 3,6mm + 2 x 2mm)
8way (4 x 3,6mm + 4 x 2mm)
Ø 3,6 mm 65 A
Ø 2,0 mm 30 A
Ø 3,6 mm 50 A
Ø 2,0 mm 20 A
Ø 3,6 mm 35 A
Ø 2,0 mm 12 A
Ø 3,6 mm <1 mΩ
Ø 2,0 mm <3 mΩ
500 mating cycles
Ø 3,6 mm 6kV
Ø 2,0 mm 4kV
Ø 3,6 mm 630 V
Ø 2,0 mm 250 V
Ø 3,6 mm 600 V
Ø 2,0 mm 250 V
Ø 3,6 mm 600 V
Ø 2,0 mm 250 V
-40 °C to 125 °C
-40 °C to 110 °C
-40 °C to +70 °C / humidity
1013 Ωcm
PA, PBT
a) CuZn alloy b) nickel plated and gold-plated
a) CuZn alloy, zinc-diecast, aluminium, plastics
b) nickel-plated, chemical nickel plated, chromium plated
FKM, NBR
IP 67 (mated)
3 (mated)
III
up to 2000 m
P Series
528 MARCH 2005
Connector type overview
PRAF PRAF
PPAF PPAF PPCM
PFDM
PFFA
P Series
529
MARCH 2005
Dimensions are in mm
Connector dimensions
TYPE
PFFA
PFDM
PRAF
PRAF
with mounting
flange
PPAF
PPAF
with mounting
flange
PPCM
DESCRIPTION
Straight receptacle, connecting earth
pin to the shell
Rotateable angled receptacle,
connecting earth pin to the shell
Extension metallic shell with variable
shield connection and variable cable
clamp
Extension metallic shell with variable
shield connection, variable cable clamp
and square flange
Plug, metallic shell with variable shield
connection and variable cable clamp
Plug, metallic shell with variable shield
connection, variable cable clamp and
square flange
Plug, plastic shell with variable shield
connection and variable cable clamp
DRAWING
P Series
530 MARCH 2005
PPAF
Ordering information guide
Shell type
Insulator layout
Without contacts, please
order contacts separately
Cable clamp
06B NNNN 915
P Series
531
MARCH 2005
Ordering Information
Receptacle 8way
(4 x 3,6mm + 4 x 2mm)
Insulator seen from wired side
Connectors including insulator Part numbers
Straight receptacle, connecting earth pin to the shell PFFA08CNNNN000
Sotateable angled receptacle, connecting earth pin to the shell PFDM08CNNNN000
Contacts please order separately Part numbers
Crimp pin Ø 2 mm, 0,75 – 2,5 mm2(AWG 18-14) 021.368.1020
Crimp pin Ø 3,6 mm, 4 – 10 mm2(AWG 12-8) 021.367.1020
Crimp pin Ø 3,6 mm, 2,5 – 4 mm2(AWG 14-12) 021.369.1020
Tools please order separately Part numbers
Crimp tool Ø 2 mm B151
Crimp tool Ø 3,6 mm (AWG 12-8) B271
Crimp tool Ø 3,6 mm (AWG 14-12) B179
Positioner Ø 3,6 mm + Ø 2 mm B263
Receptacle 6way
(4 x 3,6mm + 2 x 2mm)
Insulator seen from wired side
Connectors including insulator Part numbers
Straight receptacle, connecting earth pin to the shell PFFA06CNNNN000
Rotateable angled receptacle, connecting earth pin to the shell PFDM06CNNNN000
Contacts please order separately Part numbers
Crimp pin Ø 2 mm, 0,75 – 2,5 mm2(AWG 18-14) 021.368.1020
Crimp pin Ø 3,6 mm, 4 – 10 mm2(AWG 12-8) 021.367.1020
Crimp pin Ø 3,6 mm, 2,5 – 4 mm2(AWG 14-12) 021.369.1020
Tools please order separately Part numbers
Crimp tool Ø 2 mm B151
Crimp tool Ø 3,6 mm (AWG 12-8) B271
Crimp tool Ø 3,6 mm (AWG 14-12) B179
Positioner Ø 3,6 mm B263
06C
08C
Connectors including insulator and cable clamp Part numbers
Extension with variable shield connection and variable cable clamp PRAF08ANNNN915
Extension with variable shield connection, variable cable clamp and square flange PRAF08ANNNN91502
Contacts please order separately Part numbers
Crimp pin Ø 2 mm, 1 – 2,5 mm2(AWG 18-14) 021.285.2000
Crimp pin Ø 3,6 mm, 1 – 4 mm2(AWG 18-12) 021.282.2000
Crimp pin Ø 3,6 mm, 6 – 16 mm2(AWG 10-6) 021.283.2000
Tools please order separately Part numbers
Crimp tool Ø 2 mm B152
Crimp tool Ø 3,6 mm (AWG 18-12) B179
Crimp tool Ø 3,6 mm (AWG 10-6) B271
Positioner Ø 2 mm B166
Positioner Ø 3,6 mm (AWG 18-12) B167
Positioner Ø 3,6 mm (AWG 10-6) B168
Extension 6way
(4 x 3,6mm + 2 x 2mm)
Insulator seen from wired side
Connectors including insulator and cable clamp Part numbers
Extension with variable shield connection and variable cable clamp PRAF06ANNNN915
Extension with variable shield connection, variable cable clamp and square flange PRAF06ANNNN91502
Contacts please order separately Part numbers
Crimp pin Ø 2 mm, 1 – 2,5 mm2(AWG 18-14) 021.285.2000
Crimp pin Ø 3,6 mm, 1 – 4 mm2(AWG 18-12) 021.282.2000
Crimp pin Ø 3,6 mm, 6 – 16 mm2(AWG 10-6) 021.283.2000
Tools please order separately Part numbers
Crimp tool Ø 2 mm B152
Crimp tool Ø 3,6 mm (AWG 18-12) B179
Crimp tool Ø 3,6 mm (AWG 10-6) B271
Positioner Ø 2 mm B166
Positioner Ø 3,6 mm (AWG 18-12) B167
Positioner Ø 3,6 mm (AWG 10-6) B168
Extension 8way
(4 x 3,6mm + 4 x 2mm)
Insulator seen from wired side
P Series
532 MARCH 2005
Ordering Information
06A
08A
P Series
533
MARCH 2005
Ordering Information
Plug 8way
(4 x 3,6mm + 4 x 2mm)
Insulator seen from wired side
Connectors insulator and cable clamp Part numbers
Plug, metallic shell with variable shield connection and variable cable clamp PPAF08BNNNN915
Plug, metallic shell with variable shield connection, variable cable clamp and square flange PPAF08BNNNN91503
Plug, plastic shell with variable shield connection and variable cable clamp PPCM08DNNNN920
Contacts please order separately Part numbers
Crimp sockets 0,75 – 2,5 mm2(AWG 18-14) 020.123.1020
Crimp sockets 1,5 – 4 mm2(AWG 16-12) 020.370.1020
Crimp sockets 6 – 16 mm2(AWG 10-6) 020.371.1020
Tools please order separately Part numbers
Crimp tool Ø 2 mm B152
Crimp tool Ø 3,6 mm (AWG 16–12) B179
Crimp tool Ø 3,6 mm (AWG 10–6) B271
Positioner Ø 2 mm B154
Positioner Ø 3,6 mm (AWG 16–12) B281
Positioner Ø 3,6 mm (AWG 10–6) B158
Plug 6way
(4 x 3,6mm + 2 x 2mm)
Insulator seen from wired side
Connectors insulator and cable clamp Part numbers
Plug, metallic shell with variable shield connection and variable cable clamp PPAF06BNNNN915
Plug, metallic shell with variable shield connection, variable cable clamp and square flange PPAF06BNNNN91503
Plug, plastic shell with variable shield connection and variable cable clamp PPCM06DNNNN920
Contacts please order separately Part numbers
Crimp socket 0,75 – 2,5 mm2(AWG 18-14) 020.123.1020
Crimp socket 1,5 – 4 mm2(AWG 16-12) 020.370.1020
Crimp socket 6 – 16 mm2(AWG 10-6) 020.371.1020
Tools please order separately Part numbers
Crimp tool Ø 2 mm B152
Crimp tool Ø 3,6 mm (AWG 16–12) B179
Crimp tool Ø 3,6 mm (AWG 10–6) B271
Positioner Ø 2 mm B154
Positioner Ø 3,6 mm (AWG 16–12) B281
Positioner Ø 3,6 mm (AWG 10–6) B158
06B
08B
P Series
534 MARCH 2005
Dimensions are in mm
Mounting styles / dimensions
Drilling drawing PFFA
Variable position PFDM
Drilling drawing PFDM
drilling drawing PRAF/PPAF
cable clamp for PPAF/PRAF
clamp range:
with reducing sleeve from 9 – 17 mm
without reducing sleeve fr om 17 – 25 mm
cable clamp for PPCM
clamp range:
with reducing sleeve from 9 – 17 mm
without reducing sleeve fr om 17 – 25 mm
Ø ¯37
Ø ¯32 +0.15
30
= =
4
x
M4
t
ight area
Ø ¯31.4 +0.2
= =
30
15˚ 300˚
4
x
M4
t
ight area
P Series
535
MARCH 2005
Accessories
Crimp tools Positioner Insertion/extraction tools
B152, B151, B179, B271
B166, B263, B167, B168
B154, B281, B158 B117
B107/A
Other accessories
Thread protection cap
Part number:
031.223.1000
