UHF RFID Inlays AD-381m5 Dimensions Operating Frequency RF Protocol Chip EPC Memory TID Memory USER Memory 1.969 x 1.181 in [50 x 30mm] Global (860 - 960 MHz) ISO-18000-6C, EPC Class 1, Gen 2 Imping Monza 5 128 bit 48-bit unique serialized TID number 32 bit Common Applications Item Level Retail & Apparel Supply Chain, Inventory & Logistics Library, Media, Documents & Files Toll free US 866-903- RFID (7343) / rfid.info@averydennison.com International +1-770-965-0807 PART NUMBER RF600486 RF600487 Format Dry Inlay Wet Inlay Antenna dimensions (CD x MD) 1.969 x 1.181 in [50 x 30mm] 1.969 x 1.181 in [50 x 30mm] Die-cut dimensions N/A 2.126 x 1.34 in [54 x 34.01mm] Inlay substrate material PET PET Inlay-to-liner adhesive N/A S-490 (FASSON) Liner material N/A 1.5M Clear PET Face Sheet N/A N/A Standard pitch 1.50 in [38.1mm] 1.50 in [38.1mm] Standard web width 2.75 in [69.85mm] 2.28 in [58mm] Total thickness over chip 10-13 mils [254-330.2 microns] 14-17 mils [356-431.8 microns] Operating temperature -40 to 185 F [-40 to 85 C] -40 to 185 F [-40 to 85 C] RoHS EU Directive 2011/65/EU Compliant EU Directive 2011/65/EU Compliant Quality assurance 100% read tested with-of-tolerance inlay marked 100% read tested with-of-tolerance inlay marked Un-wind direction Inlay-side Out PS Inlay-side Out Core size with adaptor insert 3 in [76.2 mm] 3 in [76.2 mm] Maximum roll outer diameter (not to exceed) 13 in [330.2 mm] 13 in [330.2 mm] Average # of units per roll 15,000 good +/- 10% 10,000 good +/- 10% Rev 01 01 Care and handling: RFID inlays are sensitive to ESD. Observe standard industry practices relating to electronics/RFID to keep environmental impact and static charge to a minimum. Applications: This product should be tested by the customer/ user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use. Warranty: Please refer to Avery Dennison RFID standard terms and conditions. Product Information: Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data. Trademark statement: Avery Dennison, S490 and Fasson are trademarks of Avery Dennison Corporation. For the most recent information on Avery Dennison products, visit www.rfid.averydennison.com. (c) 2017 Avery Dennison Corp. All rights reserved. 170 Monarch Lane, Miamisburg, OH 45342, USA