SFH601 www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, with Base Connection FEATURES A 1 6 B C 2 5 C NC 3 4 E * Isolation test voltage (1.0 s), 5300 VRMS * VCEsat 0.25 ( 0.4) V, IF = 10 mA, IC = 2.5 mA * Built to conform to VDE requirements * Highest quality premium device * Long term stability i179004-11 * Storage temperature, -55 to +150 C i179004-3 * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DESCRIPTION The SFH601 is an optocoupler with a gallium arsenide LED emitter which is optically coupled with a silicon planar phototransistor detector. The component is packaged in a plastic plug-in case 20 AB DIN 41866. AGENCY APPROVALS * UL1577, file no. E52744 system code H or J, double protection The coupler transmits signals between two electrically isolated circuits. * DIN EN 60747-5-5 (VDE 0884-5) available with option 1 * CSA 93751 * BSI IEC 60950; IEC 60065 ORDERING INFORMATION S F H 6 0 1 - PART NUMBER # X CTR BIN 0 # # DIP Option 6 7.62 mm 10.16 mm Option 7 Option 9 PACKAGE OPTION > 0.7 mm AGENCY CERTIFIED/PACKAGE UL, BSI, CSA DIP-6 > 0.1 mm CTR (%) 40 to 80 63 to 125 100 to 200 160 to 320 SFH601-1 SFH601-2 SFH601-3 SFH601-4 DIP-6, 400 mil, option 6 SFH601-1X006 SFH601-2X006 SFH601-3X006 SFH601-4X006 SMD-6, option 7 SFH601-1X007 SFH601-2X007T SFH601-3X007(T) SFH601-4X007(T) SMD-6, option 9 SFH601-1X009T SFH601-2X009 SFH601-3X009 SFH601-4X009(T) 40 to 80 63 to 125 100 to 200 160 to 320 SFH601-1X001 SFH601-2X001 - SFH601-4X001 VDE, cUL, UL, BSI DIP-6, option 1 DIP-6, 400 mil, option 6 SFH601-1X016 - SFH601-3X016 SFH601-4X016 SMD-6, option 7 SFH601-1X017 SFH601-2X017(T) SFH601-3X017(T) - SMD-6, option 9 - - SFH601-3X019(T) - Note * For additional information on the available options refer to option information. Rev. 1.6, 23-Jul-15 Document Number: 83663 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH601 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage VR 6 V DC forward current IF 60 mA Surge forward current t = 10 s IFSM 2.5 A Pdiss 100 mW Collector emitter voltage VCEO 100 V Emitter base voltage VEBO 7 V IC 50 mA Total power dissipation OUTPUT Collector current t = 1.0 ms IC 100 mA Pdiss 150 mW Storage temperature range Tstg -55 to +150 C Ambient temperature range Tamb -55 to +100 C Tj 100 C Tsld 260 C Power dissipation COUPLER Junction temperature Soldering temperature (1) Max. 10 s, dip soldering: distance to seating plane 1.5 mm Notes * Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP). ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage IF = 60 mA VF - 1.25 1.65 V Breakdown voltage IR = 10 A VBR 6 - - V VR = 6 V IR - 0.01 10 A Reverse current Capacitance VF = 0 V, f = 1 MHz Thermal resistance CO - 25 - pF Rthja - 750 - K/W pF OUTPUT Collector emitter capacitance f = 1 MHz, VCE = 5 V CCE - 6.8 - Collector base capacitance f = 1 MHz, VCB = 5 V CCB - 8.5 - pF Emitter base capacitance f = 1 MHz, VEB = 5 V CEB - 11 - pF Thermal resistance Collector emitter leakage current Rthja - 500 - K/W SFH601-1 ICEO - 2 50 nA SFH601-2 ICEO - 2 50 nA SFH601-3 ICEO - 5 100 nA SFH601-4 ICEO - 5 100 nA IF = 10 mA, IC = 2.5 mA VCEsat - 0.25 0.4 V VI-O = 0, f = 1 MHz CIO - 0.6 - pF VCE =10 V COUPLER Saturation voltage collector emitter Capacitance (input to output) Note * Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. Rev. 1.6, 23-Jul-15 Document Number: 83663 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH601 www.vishay.com Vishay Semiconductors CURRENT TRANSFER RATIO PARAMETER TEST CONDITION IF = 10 mA IC/IF at VCE = 5.0 V IF = 1 mA PART SYMBOL MIN. TYP. MAX. SFH601-1 CTR 40 - 80 UNIT % SFH601-2 CTR 63 - 125 % SFH601-3 CTR 100 - 200 % SFH601-4 CTR 160 - 320 % SFH601-1 CTR 13 30 - % SFH601-2 CTR 22 45 - % SFH601-3 CTR 34 70 - % SFH601-4 CTR 56 90 - % SYMBOL MIN. TYP. MAX. UNIT Note * Current transfer ratio and collector emitter leakage current by dash number. SWITCHING CHARACTERISTICS PARAMETER TEST CONDITION PART NON-SATURATED Current VCC = 5 V, RL = 75 IF - 10 - mA Rise time VCC = 5 V, RL = 75 tr - 2 - s Fall time VCC = 5 V, RL = 75 tf - 2 - s Turn-on time VCC = 5 V, RL = 75 ton - 3 - s Turn-off time VCC = 5 V, RL = 75 toff - 2.3 - s SFH601-1 IF - 20 - mA SFH601-2 IF - 10 - mA SFH601-3 IF - 10 - mA SFH601-4 IF - 0.5 - mA SFH601-1 tr - 2 - s SFH601-2 tr - 3 - s SFH601-3 tr - 3 - s SFH601-4 tr - 4.6 - s SFH601-1 tf - 11 - s SFH601-2 tf - 14 - s SFH601-3 tf - 14 - s SFH601-4 tf - 15 - s SFH601-1 ton - 3 - s SFH601-2 ton - 4.2 - s SFH601-3 ton - 4.2 - s SFH601-4 ton - 6 - s SFH601-1 toff - 18 - s SFH601-2 toff - 23 - s SFH601-3 toff - 23 - s SFH601-4 toff - 25 - s SATURATED Current Rise time Fall time Turn-on time Turn-off time IF RL = 7 5 IC IF 1k VCC = 5 V VCC = 5 V 47 47 isfh601_02 isfh601_01 Fig. 1 - Linear Operation (without Saturation) Rev. 1.6, 23-Jul-15 Fig. 2 - Switching Operation (with Saturation) Document Number: 83663 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH601 www.vishay.com Vishay Semiconductors SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION Climatic classification SYMBOL VALUE According to IEC 68 part 1 Comparative tracking index Maximum rated withstanding isolation voltage UNIT 55 / 100 / 21 t = 1 min Maximum transient isolation voltage Maximum repetitive peak isolation voltage CTI 175 VISO 4420 VRMS VIOTM 8000 V VIORM 890 V VIO = 500 V, Tamb = 25 C RIO 1012 VIO = 500 V, Tamb = 100 C RIO 1011 Output safety power PSO 700 mW Input safety current ISI 400 mA TSI Isolation resistance Input safety temperature 175 C Creepage distance Standard DIP-4 7 mm Clearance distance Standard DIP-4 7 mm Creepage distance 400 mil DIP-4 8 mm Clearance distance 400 mil DIP-4 8 mm 0.4 mm Insulation thickness DTI Note * As per IEC 60747-5-5, 7.4.3.8.2, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 103 103 5 (TA = - 25 C, VCE = 5.0 V) IC/IF = f (IF) 5 3 IC (%) IF IC (%) IF 4 2 102 1 5 100 10-1 isfh601_03 3 2 2 10 1 5 5 100 5 101 2 IF (mA) Fig. 3 - Current Transfer Ratio vs. Diode Current Rev. 1.6, 23-Jul-15 DC (TA = 0 C, VCE = 5.0 V) Pulsmode IC/IF = f (IF) Pulse 4 100 10-1 isfh601_04 5 100 5 101 2 IF (mA) Fig. 4 - Current Transfer Ratio vs. Diode Current Document Number: 83663 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH601 www.vishay.com 5 103 DC Pulsbetrieb Pulse 4 VCE = 5.0 V) IC (%) IF DC Pulsbetrieb Pulse 5 3 IC/IF = f (IF) 2 102 IC (%) IF 103 Vishay Semiconductors 4 3 2 102 1 1 5 5 (IF = 10 mA, VCE = 5.0 V) IC/IF = f (T) 100 10-1 100 5 IF (mA) isfh601_05 DC Pulsbetrieb Pulse 5 25 30 TA = 50 C, VCE = 5.0 V) IC/IF = f (IF) 2 102 1 C 75 TA(C) DC Pulsbetrieb Pulse IB = 40 A 20 IB = 30 A IC (mA) 3 50 Fig. 8 - Current Transfer Ratio vs. Diode Current 4 IC (%) IF 0 isfh601_08 Fig. 5 - Current Transfer Ratio vs. Diode Current 103 101 -25 101 2 5 5 IB = 20 A 10 IC = f (VCE) IB = 10 A (IF = 0) IB = 5 A 100 10-1 IB = 2 A 5 100 5 101 2 IF (mA) isfh601_06 0 Fig. 6 - Current Transfer Ratio vs. Diode Current 103 5 DC Pulsbetrieb Pulse 5 VCE 30 DC Pulsbetrieb Pulse IC/IF = f (IF) IF = 12 mA 3 1 5 IF = 10 mA 20 Ic (mA) 2 15 IF = 14 mA 4 102 10 Fig. 9 - Transistor Characteristics TA = 75 C, VCE = 5.0 V) (%) IC IF 0 isfh601_09 IC = f (VCE) IF = 8 mA IF = 6 mA 10 IF = 4 mA IF = 1 mA 100 10-1 isfh601_07 5 100 IF (mA) 5 101 2 Fig. 7 - Current Transfer Ratio vs. Diode Current Rev. 1.6, 23-Jul-15 0 0 isfh601_10 5 VCE IF = 2 mA 10 15 Fig. 10 - Output Characteristics Document Number: 83663 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH601 www.vishay.com Vishay Semiconductors 1.2 1.0 0.9 25 50 75 VCEsat = f (IC) 0.8 0.7 VF (V) VCEsat (V) 1.1 1.0 0.6 0.5 IF = 2 x IC 0.4 0.3 IF = 3 x IC 0.2 0.1 0 0.9 10- 1 100 101 102 IF (mA) isfh601_11 VCE = 10 V IF = IC 0.7 VCE sat (V) ICEO (A) IC (mA) VCEsat = f (IC) 0.8 VCE = 40 V 10-1 102 1.0 ICEO = f (V, T) (IF = 0) 5 101 Fig. 14 - Saturation Voltage vs. Collector Current and Modulation Depth SFH601-2 Fig. 11 - Forward Voltage 100 100 isfh601_14 5 10-2 5 0.6 0.5 0.4 0.3 IF = 2 x IC 0.2 IF = 3 x IC 0.1 10-3 -25 isfh601_12 0 0 25 50 TA (C) 75 100 5 isfh601_15 Fig. 12 - Collector Emitter Off-state Current 101 IC (mA) 5 102 Fig. 15 - Saturation Voltage vs. Collector Current and Modulation Depth SFH601-3 1.0 1.0 VCEsat = f (IC) 0.9 VCEsat = f (IC) 0.8 0.8 0.7 0.7 IF = 3 x IC 0.6 VCE sat (V) VCEsat (V) 100 0.5 0.4 0.3 0.6 0.4 0.3 0.2 0.2 0.1 0 0.1 0 100 isfh601_13 101 102 IC (mA) Fig. 13 - Saturation Voltage vs. Collector Current and Modulation Depth SFH601-1 Rev. 1.6, 23-Jul-15 IF = IC 0.5 IF = 2 x IC IF = 3 x IC 100 isfh601_16 5 101 IC (mA) 5 102 Fig. 16 - Saturation Voltage vs. Collector Current and Modulation Depth SFH601-4 Document Number: 83663 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH601 www.vishay.com IF (mA) 104 D=0 0.005 0.01 0.02 0.05 0.1 103 D= Vishay Semiconductors tp T tp IF T 102 0.2 0.5 DC 101 10- 5 10- 4 D = parameter, IF = f(tp) 10- 3 10- 2 10- 1 100 101 tp (s) isfh601_17 Fig. 17 - Permissible Pulse Load 200 Ptot = f (TA) Ptot (mW) 150 Transistor 100 Diode 50 0 0 25 isfh601_18 50 75 100 TA (C) Fig. 18 - Permissible Power Dissipation for Transistor and Diode 120 IF = f (TA) IF (mA) 90 60 30 0 0 isfh601_19 25 50 75 100 TA (C) Fig. 19 - Permissible Forward Current Diode Rev. 1.6, 23-Jul-15 Document Number: 83663 7 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH601 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in inches (millimeters) 3 2 1 4 5 6 Pin one ID 6.4 0.1 ISO method A 8.6 0.1 7.62 typ. 1.2 0.1 1 min. 3.555 0.255 18 4 typ. 2.95 0.5 0.8 min. 0.85 0.05 0.5 0.05 0.25 typ. 3 to 9 7.62 to 8.81 i178004 2.54 typ. Option 6 Option 7 Option 9 10.36 9.96 7.62 typ. 9.53 10.03 7.8 7.4 7.62 ref. 0.7 4.6 4.1 0.102 0.249 0.30 typ. 8 min. 0.51 1.02 0.35 0.25 8.4 min. 10.16 10.92 10.3 max. 0.76 0.76 2.54 R0.25 2.54 R0.25 1.78 1.78 18450-16 Rev. 1.6, 23-Jul-15 15 max. 8 min. 8 min. 11.05 1.52 8 min. 11.05 1.52 Document Number: 83663 8 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DIP-6A www.vishay.com Vishay Semiconductors DIP-6A PACKAGE DIMENSIONS in inches (millimeters) 3 2 1 4 5 6 Pin one ID 6.4 0.1 ISO method A 8.6 0.1 1 min. 7.62 typ. 1.2 0.1 3.555 0.255 18 4 typ. 2.95 0.5 0.8 min. 0.85 0.05 0.5 0.05 3 to 9 0.25 typ. 7.62 to 8.81 i178004 2.54 typ. Note The information in this document provides generic information but for specific information on a product the appropriate product datasheet should be used. Rev. 1.2, 24-Aug-15 Document Number: 83263 1 For technical questions, contact: optocoupler.answers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: SFH601-1 SFH601-2 SFH601-3 SFH601-4 SFH601-1X001 SFH601-1X006 SFH601-1X007 SFH601-1X009T SFH601-1X016 SFH601-1X017 SFH601-2X001 SFH601-2X006 SFH601-2X007 SFH601-2X007T SFH601-2X009 SFH601-2X016 SFH601-2X017 SFH601-2X017T SFH601-3X001 SFH601-3X006 SFH601-3X007 SFH601-3X007T SFH601-3X009 SFH601-3X016 SFH601-3X017 SFH601-3X017T SFH601-3X019 SFH601-3X019T SFH6014X001 SFH601-4X006 SFH601-4X007 SFH601-4X007T SFH601-4X009 SFH601-4X009T SFH601-4X016 SFH601-4X017 SFH601-4X017T