MCC TM Micro Commercial Components SMBG5.0(A) THRU SMBG170(A) omponents 20736 Marilla Street Chatsworth !"# $ % !"# Features l For surface mount applications (flat handing surface for accurate Placement) l Available as a unidirectional or bi-directional device l Fast response time: typical less than 1.0ps from 0 volts to VBR minimum Transient Voltage Suppressor 5.0 to 170 Volts 600 Watt l Suppresses transients up to 600W @1.0ms including ESD per Human body model test above 16kv (class 3) DO-215AA (SMBG) (Lead Frame) l Available on tape and reel Mechanical Data l CASE: JEDEC DO-215AA l Terminals: solderable per MIL-STD-750, Method 2026 l Polarity: is indicated by cathode band. Bidirectional devices H Cathode Band J Have no polarity band l o Maximum soldering temperature: 260 C for 10 seconds Maximum Ratings @ 25oC Unless Otherwise Specified Peak Pulse Current on IPP See Table 1 Note: 1 10/1000us waveform Peak Pulse Power PPP 600W Note: 1, Dissipation 5 Peak Forward Surge IFSM) 40A Note: 3 Current Steady State Power P(AV) 1.0W Note: 2, Dissipation 4 Operation And Storage TJ , TSTG -55o C to Temperature Range +150o C Thermal Resistance R 25o C/W NOTES: 1. 2. 3. 4. 5. A E C D F B G DIMENSIONS DIM A B C D E F G H J INCHES MIN .075 .077 .004 --.015 .065 .235 .160 .130 MM MIN 1.91 1.96 .10 --.38 1.65 5.97 4.06 3.30 MAX .095 .083 .008 .02 .03 .084 .255 .185 .155 MAX 2.41 2.10 .20 .51 .76 2.13 6.48 4.70 3.94 NOTE SUGGESTED SOLDER PAD LAYOUT Non-repetitive current pulse, per Fig.2 and derated above o TA=25 C per Fig.1. 2 Mounted on 4.0mm copper pads to each terminal. 8.3ms, single half sine wave duty cycle=4 pulses per. Minute maximum. Peak forward voltage at 40A is 3.5 volts( unipolar only) o Lead temperature at 75 C=TL Peak pulse current waveform is 10/1000us, with maximum duty Cycle of 0.01%. 0.175" 0.095" 0.070" www.mccsemi.com Revision: 3 2003/04/30 MCC TM SMBG5.0(A) thru SMBG170(A) Micro Commercial Components Electrical Characteristics @ 25oC Unless Otherwise Specified MCC PART NUMBER REVERSE STAND-OFF VOLTAGE V WM VOLTS SMBG5.0 SMBG5.0A SMBG6.0 SMBG6.0A SMBG6.5 SMBG6.5A SMBG7.0 SMBG7.0A SMBG7.5 SMBG7.5A SMBG8.0 SMBG8.0A SMBG8.5 SMBG8.5A SMBG9.0 SMBG9.0A SMBG10 SMBG10A SMBG11 SMBG11A SMBG12 SMBG12A SMBG13 SMBG13A SMBG14 SMBG14A SMBG15 SMBG15A SMBG16 SMBG16A SMBG17 SMBG17A SMBG18 SMBG18A SMBG20 SMBG20A SMBG22 SMBG22A SMBG24 SMBG24A SMBG26 SMBG26A 5.0 5.0 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 20 20 22 22 24 24 26 26 BREAKDOWN VOLTAGE V (BR) @IT (VOLTS) MIN 6.40 6.40 6.67 6.67 7.22 7.22 7.78 7.78 8.33 8.33 8.89 8.89 9.44 9.44 10.0 10.0 11.1 11.1 12.2 12.2 13.3 13.3 14.4 14.4 15.6 15.6 16.7 16.7 17.8 17.8 18.9 18.9 20.0 20.0 22.2 22.2 24.4 24.4 26.7 26.7 28.9 28.9 MAX 7.30 7.00 8.15 7.37 8.82 7.98 9.51 8.60 10.2 9.21 10.9 9.83 11.5 10.4 12.2 11.1 13.6 12.3 14.9 13.5 16.3 14.7 17.6 15.9 19.1 17.2 20.4 18.5 21.8 19.7 23.1 20.9 24.4 22.1 27.1 24.5 29.8 26.9 32.6 29.5 35.3 31.9 IT(mA) 10 10 10 10 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 MAXIMUM CLAMPING VOLTAGE@IPP PEAK PULSE CURRENT IPP MAXIMUM REVERSE LEAKAGE @V WM ID VOLTS (AMPS) (uA) 9.6 9.2 11.4 10.3 12.3 11.2 13.3 12.0 14.3 12.9 15.0 13.6 15.9 14.4 16.9 15.4 18.8 17.0 20.1 18.2 22.0 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 26.0 30.5 27.6 32.2 29.2 35.8 32.4 39.4 35.5 43.0 38.9 46.6 42.1 62.5 65.2 52.6 58.3 48.7 53.6 45.1 50.0 42.0 46.5 40.0 44.1 37.7 41.7 35.5 39.0 31.9 35.3 29.9 33.0 27.3 30.2 25.2 27.9 23.3 25.8 22.3 24.0 20.8 23.1 19.7 21.7 18.6 20.5 16.7 18.5 15.2 16.9 14.0 15.4 12.4 14.2 800 800 800 800 500 500 200 200 100 100 50 50 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 MARKING CODE 5.0 5.0A 6.0 6.0A 6.5 6.5A 7.0 7.0A 7.5 7.5A 8.0 8.0A 8.5 8.5A 9.0 9.0A 10 10A 11 11A 12 12A 13 13A 14 14A 15 15A 16 16A 17 17A 18 18A 20 20A 22 22A 24 24A 26 26A www.mccsemi.com Revision: 3 2003/04/30 MCC SMBG5.0(A) thru SMBG170(A) TM Micro Commercial Components Electrical Characteristics @ 25oC Unless Otherwise Specified MCC PART NUMBER REVERSE STAND-OFF VOLTAGE V WM VOLTS SMBG28 SMBG28A SMBG30 SMBG30A SMBG33 SMBG33A SMBG36 SMBG36A SMBG40 SMBG40A SMBG43 SMBG43A SMBG45 SMBG45A SMBG48 SMBG48A SMBG51 SMBG51A SMBG54 SMBG54A SMBG58 SMBG58A SMBG60 SMBG60A SMBG64 SMBG64A SMBG70 SMBG70A SMBG75 SMBG75A SMBG78 SMBG78A SMBG85 SMBG85A SMBG90 SMBG90A SMBG100 SMBG100A SMBG110 SMBG110A SMBG120 SMBG120A 28 28 30 30 33 33 36 36 40 40 43 43 45 45 48 48 51 51 54 54 58 58 60 60 64 64 70 70 75 75 78 78 85 85 90 90 100 100 110 110 120 120 BREAKDOWN VOLTAGE V (BR) @IT (VOLTS) MIN 31.1 31.1 33.3 33.3 36.7 36.7 40.0 40.0 44.4 44.4 47.8 47.8 50.0 50.0 53.3 53.3 56.7 56.7 60.0 60.0 64.4 64.4 66.7 66.7 71.1 71.1 77.8 77.8 83.3 83.3 86.7 86.7 94.4 94.4 100 100 111 111 122 122 133 133 MAX 38.0 34.4 40.7 36.8 44.9 40.6 48.9 44.2 54.3 49.1 58.4 52.8 61.1 55.3 65.1 58.9 69.3 62.7 73.3 66.3 78.7 71.2 81.5 73.7 86.9 78.6 95.1 86.0 102 92.1 106 95.8 115 104 122 111 136 123 149 135 163 147 IT(mA) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 MAXIMUM CLAMPING VOLTAGE@IPP PEAK PULSE CURRENT IPP MAXIMUM REVERSE LEAKAGE @V WM ID VOLTS (AMPS) (uA) MARKING CODE 50.0 45.4 53.5 48.4 59.0 53.3 64.3 58.1 71.4 64.5 76.7 69.4 80.3 72.7 85.5 77.4 91.1 82.4 96.3 87.1 103 93.6 107 96.8 114 103 125 113 134 121 139 126 151 137 160 146 179 162 196 177 214 193 12.0 13.2 11.2 12.4 10.2 11.3 9.3 10.3 8.4 9.3 7.8 8.6 7.5 8.3 7.0 7.7 6.6 7.3 6.2 6.9 5.8 6.4 5.6 6.2 5.3 5.8 4.8 5.3 4.5 4.9 4.3 4.7 3.9 4.4 3.8 4.1 3.4 3.7 3.0 3.4 2.8 3.1 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 28 28A 30 30A 33 33A 36 36A 40 40A 43 43A 45 45A 48 48A 51 51A 54 54A 58 58A 60 60A 64 64A 70 70A 75 75A 78 78A 85 85A 90 90A 100 100A 110 110A 120 120A www.mccsemi.com Revision: 3 2003/04/30 MCC TM Micro Commercial Components SMBG5.0(A) thru SMBG170(A) Electrical Characteristics @ 25oC Unless Otherwise Specified MCC PART NUMBER REVERSE STAND-OFF VOLTAGE V WM VOLTS SMBG130 SMBG130A SMBG150 SMBG150A SMBG160 SMBG160A SMBG170 SMBG170A 130 130 150 150 160 160 170 170 BREAKDOWN VOLTAGE V (BR) @IT (VOLTS) MIN 144 144 167 167 178 178 189 189 MAX 176 159 204 185 218 197 231 209 IT(mA) 1 1 1 1 1 1 1 1 MAXIMUM CLAMPING VOLTAGE@IPP PEAK PULSE CURRENT IPP MAXIMUM REVERSE LEAKAGE @V WM ID VOLTS (AMPS) (uA) MARKING CODE 5 5 5 5 5 5 5 5 130 130A 150 150A 160 160A 170 170A 231 209 268 243 287 259 304 275 2.6 2.9 2.2 2.5 2.1 2.3 2.0 2.2 www.mccsemi.com Revision: 3 2003/04/30 MCC MAXIMUM RATINGS AND CHARACTERISTIC CURVE SMBG SERIES TM Micro Commercial Components Figure 2 Pulse Waveform For Exponential Surge Figure 1 Derating Curve 100 75 100 50 25 50 0 0 0 0 50 100 150 200 1 2 3 4 5 6 Milliseconds Pulse Current (IP ) In Percentage Of IPP - Amperes versus Time (t) - Milliseconds Lead Temperature C Figure 3 Typical Capacitance versus Breakdown Voltage 10000 1000 100 10 1.0 10 100 1000 Volts Typical Capacitance ( pF) - picofarads versus Breakdown Voltage (V BR) - Volts www.mccsemi.com Revision: 3 2003/04/30 MAXIMUM RATINGS AND CHARACTERISTIC CURVE SMBG SERIES MCC TM Micro Commercial Components Figure 4 Peak Pulse Power versus Pulse Width Peak Pulse Power (PPP ) - Kilowatts versus Pulse Width (TW ) - Microseconds www.mccsemi.com Revision: 3 2003/04/30