STANDARD SPECIFICATIONS:
TYPICAL APPLICATIONS:
FEATURES:
40.0 X 35.0 X 13.1mm
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Visit www.abracon.com for Terms & Conditions of Sale
CERTIFIED
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
MSL level: Not Applicable
APAMP-128
Revised: 10.30.14
• High Reliability/Sensitivity
• Compact Size
• Easy to install (magnet base)
• ROHS Compliant
ANTENNA’S IMPEDANCE AND RETURN-LOSS CHARACTERISTICS
Antenna
Low Noise Amplifier (LNA)
Parameters
Min.
Typ.
Max.
Units
Note
Center Frequency
1574.40
1575.42
1576.44
MHz
DC Voltage
2.5
3.5
V
Gain
26
28
30
dB
(+25°C ± 10°C)
Output VSWR
2.0
Noise Figure
1.8
(+25°C ± 10°C)
DC current
14
16
mA
(At 3.0V)
• Automotive Navigation
• Automotive Monitoring
• Personal Tracking
Parameters
Min.
Typ.
Max.
Units
Note
Center Frequency 1574.40 1575.42 1576.44 MHz
Bandwidth
10.0 MHz
VSWR 1.5:1
Polarization Model
RHCP
(Right Hand Circular Polarization)
Impedance
50
Ω
Gain
3.5
dBic
(
Based on 70× 70mm ground plane)
Operating Temperature -40 +80 ˚C
Storage Temperature
-45 +85
˚C
GPS Active Antenna Module - Magnet Base
RoHS/RoHS II compliant
Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I)
ESD Sensitive
Test condition: 20x20mm ground
S11: Input VSWR
40.0 X 35.0 X 13.1mm
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Visit www.abracon.com for Terms & Conditions of Sale
CERTIFIED
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
APAMP-128
Revised: 10.30.14
LNA REFLECTION PROFILE
OUTLINE DRAWING:
Unit:mm
Top View
Side View
Bottom View
Parameters
Description
L (Cable Length)
300±10cm
Antenna
Dielectric Ceramic
RF Cable
RG174
PCB
FR4
RF Connector SMA-J3
Shielding
Tinplate
Thickness
13.5mm
Mounting Type
Magnet Base
GPS Active Antenna Module - Magnet Base
RoHS/RoHS II compliant
Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I)
ESD Sensitive
Test condition: DC 3.0V
S21: LNA Gain
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Revised: 10.30.14
Visit www.abracon.com for Terms & Conditions of Sale
CERTIFIED
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
PRODUCT IMAGE:
PACKAGING:
CAUTION:
(1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause
damage to the component.
(2) Do not expose the component to open flame.
(3) This specification applies to the functionality of the component as a single unit. Please insure the component is thoroughly evaluated in the application
circuit.
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
APAMP-128 40.0 X 35.0 X 13.1mm
Each 475 x 215 x 215 mm size carton includes 100 pieces of antenna.
GPS Active Antenna Module - Magnet Base
RoHS/RoHS II compliant
Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I)
ESD Sensitive
