90 Patterns - Dual Grid Vishay Micro-Measurements Transducer-Class(R) Strain Gages size shown. GAGE PATTERN Actual Enlarged when necessary for definition. inch millimeter DIMENSIONS GAGE DESIGNATION RES. IN OHMS STANDARD CREEP CODE Often used on small column transducers. GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.062 0.295 0.080 0.080 1.57 7.49 2.03 2.03 MATRIX SIZE 0.36 L x 0.14 W 9.0 L x 3.6 W N2A-XX-S063Q-350 350 0.2% Q* General-purpose 90 `tee' rosette. GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.062 0.133 0.075 0.168 1.57 3.38 1.91 4.27 0.19 L x 0.23 W MATRIX SIZE 4.9 L x 5.8 W 350 0.2% L* Encapsulated 90 `tee' rosettes. L GAGE LENGTH N2A-XX-S064L-350 OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.080 0.170 0.110 0.240 2.03 4.32 2.79 6.10 MATRIX SIZE 0.23 L x 0.30 W 5.9 L x 7.6 W J2A-XX-S114L-350 J2A-XX-S152M-10C 350 0.4% 1000 0.4% L M *Only creep code available for this gage type. Document No: 11556 Revision 22-Aug-03 micro-measurements@vishay.com www.vishaymg.com 17 90 Patterns - Dual Grid Vishay Micro-Measurements Transducer-Class(R) Strain Gages size shown. GAGE PATTERN Actual Enlarged when necessary for definition. inch millimeter DIMENSIONS GAGE DESIGNATION RES. IN OHMS STANDARD CREEP CODE Designed for low-cost, half-bridge transducers. BAL is balanced to 0.2%, but RG is 350 ohms 15%. BAL is balanced to 0.2%, but RG is 1000 ohms 15%. GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH GRID 1 0.060 0.180 GRID 1 0.120 0.175 1.52 4.57 3.05 4.45 MATRIX SIZE 0.22 L x 0.22 W 5.6 L x 5.6 W N2A-XX-S153R-35B N2A-XX-S150R-1KB BAL 0.2% BAL 0.2% R* R* Often used on column transducers. GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.100 0.415 0.130 0.130 2.54 10.54 3.30 3.30 MATRIX SIZE 0.48 L x 0.19 W 12.2 L x 4.8 W N2K-XX-S165V-10C/DP 1000 0.2% V Often used on column transducers. GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.100 0.415 0.130 0.130 2.54 10.54 3.30 3.30 MATRIX SIZE 0.48 L x 0.19 W 12.2 L x 4.8 W N2A-XX-S053P-350 350 0.2% P *Only creep code available for this gage type. www.vishaymg.com 18 micro-measurements@vishay.com Document No: 11556 Revision 22-Aug-03 90 Patterns - Dual Grid Vishay Micro-Measurements Transducer-Class(R) Strain Gages size shown. GAGE PATTERN Actual Enlarged when necessary for definition. inch millimeter DIMENSIONS GAGE DESIGNATION RES. IN OHMS STANDARD CREEP CODE General-purpose 90 `tee' rosettes. GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.125 0.230 0.150 0.340 3.18 5.84 3.81 8.64 0.29 L x 0.40 W MATRIX SIZE 7.4 L x 10.2 W N2A-XX-S054Y-350 N2K-XX-S145R-10C/DP TK-XX-S145R-10C/DP 350 0.2% 1000 0.2% 1000 0.2% Y R R Three-tab version of S145R pattern. GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.125 0.230 0.150 0.340 3.18 5.84 3.81 8.64 MATRIX SIZE 0.29 L x 0.40 W 7.4 L x 10.2 W N2K-XX-S146R-10C/DP TK-XX-S146R-10C/DP 1000 0.2% 1000 0.2% R R Used on high-accuracy column load cells. (1) Gage length is 0.200 in (5.1mm). (2) Transverse gage length is 0.050 in (1.27mm). GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH (1) 0.325 (2) 0.270 (1) 8.26 (2) 6.86 MATRIX SIZE 0.38 L x 0.33 W 9.6 L x 8.4 W N2A-XX-S167R-350 N2K-XX-S015T-350/DP N2K-XX-S184T-10C/DP TK-XX-S015T-350/DP TK-XX-S184T-10C/DP 350 350 1000 350 1000 0.2% 0.2% 0.2% 0.2% 0.2% R* T* T* T* T* *Only creep code available for this gage type. Document No: 11556 Revision 22-Aug-03 micro-measurements@vishay.com www.vishaymg.com 19