ELECTRIC DOUBLE LAYER CAPACITORS "EVerCAP " JL Screw Terminal Type, High Power Density Type series High power density. Rapid charge-discharge. Suitable for regeneration and UPS applications. Compliant to the RoHS directive (2011/65/EU). Specifications Performance Characteristics Item Category Temperature Range - 25 to + 60C Rated Voltage Range 2.5V Rated Capacitance Range 700 to 2600F Capacitance Tolerance 20% (20C) Leakage Current 0.5C (mA) [C : Rated Capacitance (F)] (After 30 minutes' application of rated voltage : 2.5V) Stability at Low Temperature Capacitance (- 25C) / Capacitance (+20C) x100 DCR* Refer to the table below. (20C) Endurance The specifications listed at right shall be met when the capacitors are restored to 20C after the rated voltage is applied for 2000 hours at 60C. Capacitance change The specifications listed at right shall be met when the capacitors are restored to 20C after storing the capacitors under no load for 2000 hours at 60C. Shelf Life Marking See Note 70% DCR (-25C) / DCR (+20C) DCR Within 30% of the initial capacitance value 300% or less than the initial value Leakage current Less than or equal to the initial specified value Capacitance change DCR Within 30% of the initial capacitance value 300% or less than the initial value Leakage current Less than or equal to the initial specified value Printed with white color letter on black sleeve. Drawing Type numbering system (Example : 2.5V 700F) 1 40 M6(40) Sleeve 2 3 4 5 6 7 8 9 U B1 S W1 D+2MAX. + Mounting bracket T Configuration h H0.5 P A 1 r1 MAX. 51 and larger Bottom plate 12 13 14 Case dia. code(40) Configuration D Code Capacitance tolerance (20%) D 40 Rated capacitance (700F) F 51 Rated voltage (2.5V) 63.5 G Series name Type Pressure relief vent L+ 10 11 J J L 0 E 7 0 7 M S E D Hexagenal headed bolt Bottom plate Hexagenal headed bolt M6 U S 0 12 P A2 D +2MAX. W 1 (40) Code less 2-leg brackets BN No brackets (51,63.5) Code less 3-leg brackets BB 2-leg brackets No bracket BN Note : The capacitance calculated from discharge time (T) with constant current ( i ) after 30minuite charge with rated voltage (2.5V). The discharge current ( i ) is 0.01 x rated capacitance (F). The discharge time (T) measured between 2V and 1V with constant current. The capacitance calculated bellow. Capacitance (F) = i x T SE T Sleeve Cr ( III) Plating (RoHS compliant) Pressure relief vent S h L+ T P 2 H 1 Pressure relief vent U A 2 MAX. 30 1 Dimensions Dimensions of mounting bracket Rated Voltage ( Code ) Cap. (F) Cap. code 2.5V (0E) 700 850 1500 1700 2600 707 857 158 178 268 DCR Typical (m) 3.5 2.5 1.8 1.7 1.3 Case size D x L (mm) D L 40 51 63.5 105 135 135 142 150 Ref. Weight (g) 210 250 450 500 800 The listed DCR value is typical and therefore not a guaranteed value. Dimensions of terminal pitch(W) and length(R) and Normal dia. of bolt (mm) D 40 51 63.5 7 *DC internal resistance W 18.8 26.0 28.6 R 9 10 10 3 3 3 Nominal of bolt M6 M6 M6 Leg shape Symbol P A B T S U H h D 3-Legs 63.5 51 38.1 32.5 43 38.5 - 7.5 5.0 12 60 20 15 - 8.0 5.0 14 60 25 20 40 27 32 48 7.0 3.5 10 45 17 12 2-Legs 51 33.2 40 - 6.0 4.5 14 30 25 15 (mm) 63.5 40.5 46.5 - 7.0 4.5 14 30 35 20 Note)The brackets will be supplied in the separate box. CAT.8100D