PROFESSIONAL QUALITY FIXED CONTACT STANDARD DENSITY D-SUBMINIATURE Positronic Industries connectpositronic.com D-Sub Size 20 Contacts, Fixed IEC Publication 60807-2 Performance Level Two U.L. Recognized File #E49351 CSA Recognized File #LR54219 MD SERIES Telecommunication U.L. File #14098 O NIC INDU Di * EC For RoHS options see page 10. 5/ U rE Compliant IES RoHS TR POS R S IT straight and right angle (90) printed board mount terminations featuring a choice of three printed board footprints. Melo-D series connectors are mateable and compatible with all D-subminiature connectors conforming to IEC 60807-2, IEC 60807-3 and MIL-DTL-24308. A wide assortment of printed board mounting hardware, cable support hoods and locking systems is available from stock. * pe Melo-D series connectors are professional quality connectors recommended for use in sheltered, non-corrosive indoor or outdoor environments having normal ventilation, but without temperature or humidity controls. These fixed contact connectors meet the dimensional and performance requirements of IEC 60807-2, Performance Level Two. Melo-D series connectors utilize precision machined contacts which are fixed within the connector body. The female contact is an open entry design contact, precision machined of high tensile phosphor bronze. Six standard connector variants are offered in arrangements of 9, 15, 25, 29, 37 and 50 contacts. Each Melo-D connector variant is available with contact terminations for solder cup, wrap post, and rec tive 2002 /9 MELO-D SERIES TECHNICAL CHARACTERISTICS MATERIALS AND FINISHES: Insulator: Contacts: Contact Plating: Shells: Nylon resin, UL 94V-0, black color. Precision machined copper alloy. Professional performance Gold flash over nickel plate. Other finishes available upon request. Steel or brass with tin plate; zinc plate with chromate seal, stainless steel passivated. Other materials and finishes available upon request. Mounting Spacers and Brackets: Nylon; copper alloy or steel with zinc plate and chromate seal or tin plate; phosphor bronze with tin plate; stainless steel, passivated. Push-On Fasteners: Phosphor bronze or beryllium copper with tin plate. Jackscrew Systems: Brass or steel with zinc plate and chromate seal or clear zinc plate or tin plate; stainless steel, passivated.. Vibration Lock Systems: Slide lock and lock tabs, steel with nickel plate. Hoods: Composite and plastic, UL 94V-0; brass or steel with zinc plate and chromate seal; aluminum or aluminum with electroless nickel plate; die cast zinc. Non-magnetic versions are available, contact Technical Sales. MECHANICAL CHARACTERISTICS: Fixed Contacts: Contact Retention In Insulator: Resistance To Solder Iron Heat: 5 Size 20 contact, male - 0.040 inch [1.02mm] mating diameter. Female contact - rugged open entry design. 6 lbs. [27N] 500F [260C] for 10 seconds duration per IEC 60512-6. DIMENSIONS ARE IN INCHES [MILLIMETERS]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. Contact Terminations: Solder cup contacts - 0.042 inch [1.06mm] minimum hole diameter for 20 AWG [0.5mm2] wire maximum. Straight Printed Board Mount - 0.028 inch [0.71mm] termination diameter. Right Angle (90) Printed Board Mount 0.028 inch [0.71mm] termination diameter for all printed board footprints. Wrap Post - 0.025 inch [0.64mm] square. Shells: Male shells may be dimpled for EMI/ESD ground paths. Polarization: Trapezoidally shaped shells and polarized jackscrews. Mounting To Angle Brackets: Jackscrews and riveted fasteners with a 0.120 inch [3.05mm] clearance hole, and threaded riveted fasteners with 4-40 threads and nylon lock inserts. Mounting To Printed Board: Rapid installation push-on fasteners and threaded posts. Locking Systems: Jackscrews and vibration locking systems. Mechanical Operations: 500 operations minimum per IEC 60512-5. ELECTRICAL CHARACTERISTICS: Contact Current Rating: Initial Contact Resistance: Insulator Resistance: Proof Voltage: Clearance and Creepage Distance [minimum]: Working Voltage: 7.5 amperes nominal. 0.008 ohms maximum. 5 G ohms. 1000 V r.m.s. 0.039 inch [1.0mm]. 300 V r.m.s. CLIMATIC CHARACTERISTICS: Temperature Range: Damp Heat, Steady State: -55C to +125C. 10 days. MD series connectors can be supplied with interfacial seals and sealed between shell and insulator. This provides an additional degree of moisture resistance. See Accessories catalog for details. PROFESSIONAL QUALITY FIXED CONTACT STANDARD DENSITY D-SUBMINIATURE D-Sub Positronic Industries connectpositronic.com CONTACT VARIANTS FACE VIEW OF MALE OR REAR VIEW OF FEMALE 6 3 7 4 8 5 2 1 9 9 2 3 4 5 6 7 5 6 7 1 8 10 11 12 13 14 15 MD 9 1 4 3 3 4 5 8 9 1 3 4 5 6 7 8 9 7 8 9 10 11 12 13 23 24 25 MD 25 10 2 6 14 15 16 17 18 19 20 21 22 MD 15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 10 11 12 13 14 15 16 17 18 19 11 12 13 14 15 16 17 18 19 20 2 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 21 22 23 24 25 26 27 28 29 MD 29 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 MD 37 MD SERIES 2 1 MD 50 STANDARD SHELL ASSEMBLY M B B1 K D1 E D H 0.0360.008 [0.910.20] C A 10 Typ. G 0.0500.010 [1.270.25] O0.1200.005 [O3.050.13] Mounting hole, two places 0.220 [5.59] Max. OPTIONAL SHELL ASSEMBLY WITH UNIVERSAL FLOAT MOUNTS (F) OPTIONAL SHELL ASSEMBLY (0, 02) 0.1200.010 [3.050.25] O0.1200.005 [O3.050.13] Mounting hole, two places for stainless steel shell (0 option) O0.154 [3.91] Mounting hole, two places (02 option) CONNECTOR VARIANT SIZES A 0.015 [0.38] 9M 1.213 [30.81] 9F 1.213 [30.81] 15 M 1.541 [39.14] 15 F 1.541 [39.14] 25 M 2.088 [53.04] 25 F 2.088 [53.04] 29 M 1.770 [44.96] 29 F 1.770 [44.96] 37 M 2.729 [69.32] 37 F 2.729 [69.32] 50 M 2.635 [66.93] 50 F 2.635 [66.93] B 0.005 [0.13] B1 0.005 [0.13] C 0.005 [0.13] 0.666 [16.92] 0.984 [24.99] 0.643 [16.33] 0.984 [24.99] 0.994 [25.25] 0.971 [24.66] 1.534 [38.96] 1.511 [38.38] 1.251 [31.78] 2.182 [55.42] 2.159 [54.84] 2.079 [52.81] 2.064 [52.43] H 0.010 [0.25] K 0.005 [0.13] M 0.010 [0.25] 0.329 [8.36] 0.494 [12.55] 0.759 [19.28] 0.422 [10.72] 0.233 [5.92] 0.422 [10.72] 0.494 [12.55] 0.759 [19.28] 0.422 [10.72] 0.243 [6.17] 0.429 [10.90] 0.494 [12.55] 1.083 [27.51] 0.422 [10.72] 0.233 [5.92] 0.422 [10.72] 0.494 [12.55] 1.083 [27.51] 0.422 [10.72] 0.243 [6.17] 0.429 [10.90] 0.494 [12.55] 1.625 [41.28] 0.422 [10.72] 0.230 [5.84] 0.426 [10.82] 0.494 [12.55] 1.625 [41.28] 0.422 [10.72] 0.243 [6.17] 0.429 [10.90] 0.605 [15.37] 1.322 [33.58] 0.539 [13.69] 0.217 [5.51] 0.426 [10.82] 0.605 [15.37] 1.322 [33.58] 0.539 [13.69] 0.237 [6.02] 0.429 [10.90] 0.494 [12.55] 2.272 [57.71] 0.422 [10.72] 0.230 [5.84] 0.426 [10.82] 0.494 [12.55] 2.272 [57.71] 0.422 [10.72] 0.243 [6.17] 0.429 [10.90] 0.605 [15.37] 2.178 [55.32] 0.534 [13.56] 0.230 [5.84] 0.426 [10.82] 0.605 [15.37] 2.178 [55.32] 0.534 [13.56] 0.243 [6.17] 0.429 [10.90] 0.329 [8.36] 0.311 [7.90] 0.450 [11.43] 0.431 [10.95] 0.329 [8.36] 0.311 [7.90] 2.406 [61.11] 2.406 [61.11] G 0.010 [0.25] 0.311 [7.90] 2.500 [63.50] 2.500 [63.50] E 0.015 [0.38] 0.329 [8.36] 1.534 [38.96] 1.534 [38.96] [ D1 0.005 [0.13] 0.311 [7.90] 1.852 [47.04] 1.852 [47.04] 1.274 [32.36] D 0.005 [0.13] 1.312 [33.32] 1.312 [33.32] +0.13 O0.086+0.005 -0.000 O2.18-0.00 Mounting hole, two places 0.032 [0.81] Total diametral float 0.441 [11.20] 0.423 [10.74] ] DIMENSIONS ARE IN INCHES [MILLIMETERS]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. 6 PROFESSIONAL QUALITY FIXED CONTACT STANDARD DENSITY D-SUBMINIATURE Positronic Industries connectpositronic.com D-Sub SOLDER CUP CONNECTOR CODE 2 Fixed female jackscrews 20 AWG max. 2 [0.5 mm ] Fixed female jackscrew For solder cup contacts, specify code 2 in step 4 of ordering information. 0.135 [3.43] 0.352 [8.94] Fixed male jackscrew Fixed male and female polarized jackscrews available. Specify code T6 in step 7 of ordering information. MD SERIES Typical Part Number: MD15M200T6Z Typical Part Number: MD15M200T2Z STRAIGHT PRINTED BOARD MOUNT CONNECTOR CODE 3, 32 AND 33 CODE NUMBER L OD 3 0.150 [3.81] 0.028 [0.71] 32 0.375 [9.53] 0.028 [0.71] 33 0.500 [12.70] 0.028 [0.71] Fixed female jackscrews Swaged spacer with push-on fastener phosphor bronze 0.225 [5.71] NEW! 0.010 [0.25] NOMINAL For straight printed board mount contacts, specify code number in step 4 of ordering information. L OD Typical Part Number: MD25F3S60T0 FERRITE INDUCTOR BAR FOR EMI/RFI NOISE SUPPRESSION CODE F AND Q FILTERING CHARACTERISTICS STRAIGHT PRINTED BOARD MOUNT CONNECTOR Fixed female jackscrews Swaged spacer with push-on fastener phosphor bronze IMPEDANCE [OHMS] ATTENUATION [dB] 0.010 [0.25] Nominal IMPEDANCE ATTENUATION* SERIES CODE NO. MD, MDX, HDC ODD L A 0.375 [9.53] 0.240 [6.10] 32 DD FREQUENCY A 0.375 [9.53] 0.165 [4.19] 0.515 [13.08] 0.165 [4.19] ED, HDC 36 0.375 [9.53] 0.101 [2.57] MD, MDX 4 ---------- ---------- ODD 5 ---------- ---------- MD 59 ---------- ---------- MD, HDC 6 Ferrite Inductor Bar L RIGHT ANGLE (90) PRINTED BOARD MOUNT CONNECTOR Ferrite inductor bar 0.1350.005 [3.430.13] 0.375 [9.53] 0.360 [9.14] Specify code F or Q in step 6 of ordering information. F for ferrite inductor and Q for ferrite inductor with push-on fastener. * NO-LOAD CONDITION MATERIAL: Nickel zinc ceramic WRAP POST CONNECTOR Fixed female jackscrews 0.025 [0.64] Sq. 0.495 [12.57] CODE 6 For wrap post contacts, specify code 6 in step 4 of ordering information. 0.720 [18.29] Typical Part Number: MD15F600T20 7 DIMENSIONS ARE IN INCHES [MILLIMETERS]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. MD25M6S50T0 PROFESSIONAL QUALITY FIXED CONTACT STANDARD DENSITY D-SUBMINIATURE D-Sub Positronic Industries connectpositronic.com RIGHT ANGLE (90) PRINTED BOARD MOUNT CONNECTOR CODE 5, 0.283 [7.19] CONTACT EXTENSION B 0.008 [0.20] Fixed female jackscrews A PART NUMBER A B C D MD9*5R4*** 1.204 [30.58] 0.984 [24.99] 0.339 [8.61] 0.283 [7.19] MD15*5R4*** 1.532 [38.91] 1.312 [33.32] 0.339 [8.61] 0.283 [7.19] MD25*5R4*** 2.072 [52.63] 1.852 [47.04] 0.339 [8.61] 0.283 [7.19] MD29*5R4*** 1.754 [44.55] 1.534 [38.96] 0.395 [10.03] 0.283 [7.19] MD37*5R4*** 2.720 [69.09] 2.500 [63.50] 0.339 [8.61] 0.283 [7.19] MD50*5R4*** 2.626 [66.70] 2.406 [61.11] 0.395 [10.03] 0.283 [7.19] MD SERIES MD**5R4*** 0.283 [7.19] CONTACT EXTENSION C 0.112 [2.84] Typ. Specify code 5 in step 4 of ordering information 0.112 [2.84] Typ. Numbering shown is rear view of male and face view of female. D D 0.112 [2.84] Typ. 13 12 25 Typical Part Number: MD25M5R4NT2X 11 24 10 23 9 22 7 8 21 20 Push-on fastener beryllium copper 6 19 5 4 18 17 3 16 2 15 0.160 [4.06] Nominal 1 14 Typical Part Number: MD50M5R4NT2X O0.028 [0.71] RIGHT ANGLE (90) PRINTED BOARD MOUNT CONNECTOR 0.125 [3.18] X 0.233 [5.92] Oval hole Typ. CODE 59, 0.545 [13.84] CONTACT EXTENSION MD**59B*** 0.545 [13.84] CONTACT EXTENSION B 0.008 [0.20] Fixed female jackscrews PART NUMBER A B C D E MD9*59B*** 1.204 [30.58] 0.984 [24.99] 0.275 [6.99] 0.545 [13.84] 0.601 [15.27] MD15*59B*** 1.532 [38.91] 1.312 [33.32] 0.275 [6.99] 0.545 [13.84] 0.601 [15.27] MD25*59B*** 2.072 [52.63] 1.852 [47.04] 0.275 [6.99] 0.545 [13.84] 0.601 [15.27] MD29*59B*** 1.754 [44.55] 1.534 [38.96] 0.275 [6.99] 0.545 [13.84] 0.657 [16.69] MD37*59B*** 2.720 [69.09] 2.500 [63.50] 0.275 [6.99] 0.545 [13.84] 0.601 [15.27] MD50*59B*** 2.626 [66.70] 2.406 [61.11] 0.275 [6.99] 0.545 [13.84] 0.657 [16.69] A C E Specify code 59 in step 4 of ordering information 0.112 [2.84] Typ. Numbering shown is rear view of male and face view of female. D 0.112 [2.84] Typ. D 0.112 [2.84] Typ. 13 12 25 Typical Part Number: MD25M59B0T2X Typical Part Number: MD29M59B0T2X 11 24 10 23 9 22 7 8 21 20 6 19 5 18 4 17 3 16 2 15 O0.028 [0.71] 1 14 0.125 [3.18] Nominal 8 PROFESSIONAL QUALITY FIXED CONTACT STANDARD DENSITY D-SUBMINIATURE Positronic Industries connectpositronic.com D-Sub RIGHT ANGLE (90) PRINTED BOARD MOUNT CONNECTOR C O0.125 [3.18] Typ. B 0.008 [0.20] MD SERIES Fixed female jackscrews CODE 4, 0.450 [11.43] CONTACT EXTENSION A MD**4B*** 0.450 [11.43] CONTACT EXTENSION PART NUMBER A B C D MD9*4B*** 1.204 [30.58] 0.984 [24.99] 0.506 [12.85] 0.450 [11.43] MD15*4B*** 1.532 [38.91] 1.312 [33.32] 0.506 [12.85] 0.450 [11.43] MD25*4B*** 2.072 [52.63] 1.852 [47.04] 0.506 [12.85] 0.450 [11.43] MD29*4B*** 1.754 [44.55] 1.534 [38.96] 0.562 [14.27] 0.450 [11.43] MD37*4B*** 2.720 [69.09] 2.500 [63.50] 0.506 [12.85] 0.450 [11.43] MD50*4B*** 2.626 [66.70] 2.406 [61.11] 0.562 [14.27] 0.450 [11.43] 0.112 [2.84] Typ. Specify code 4 in step 4 of ordering information Numbering shown is rear view of male and face view of female. D 0.112 [2.84] Typ. D 0.112 [2.84] Typ. 13 12 25 11 24 10 23 9 22 7 8 21 Typical Part Number: MD25M4B0T20 20 6 19 5 18 4 17 3 16 2 15 1 14 0.160 [4.06] Nominal Typical Part Number: MD50M4B0T20 O0.028 [0.71] RIGHT ANGLE (90) AND STRAIGHT PRINTED BOARD CONTACT HOLE PATTERN MOUNT CONNECTOR WITH MATING FACE POSITIONED TO FOLLOW DIRECTION OF ARROW. Sym. Sym. 0.492 [12.50] 0.216 [5.49] 0.656 [16.66] 0.108 [2.74] Typ. 0.112 [2.84] 0.054 [1.37] Typ. 0.162 [4.11] 0.112 [2.84] 0.108 [2.74] Typ. MD9 0.378 [9.60] 0.054 [1.37] Typ. 0.324 [8.23] MD15 Sym. 0.224 [5.69] 0.112 [2.84] 0.054 [1.37] Typ. 0.432 [10.97] 0.108 [2.74] Typ. 0.486 [12.34] MD29 1.250 [31.75] 0.055 [1.40] Typ. 0.652 [16.56] 0.109 [2.77] Typ. 0.112 [2.84] 0.055 [1.40] Typ. 0.598 [15.19] MD25 Sym. 0.767 [19.48] Sym. 0.926 [23.52] 1.203 [30.56] 0.109 [2.77] Typ. 0.978 [24.84] 0.109 [2.77] Typ. 0.112 [2.84] 0.924 [23.47] Sym. 0.870 [22.10] 0.224 [5.69] 0.112 [2.84] 0.055 [1.40] Typ. 0.815 [20.70] MD37 MD50 SUGGESTED PRINTED BOARD HOLE SIZES: 9 DIMENSIONS ARE IN INCHES [MILLIMETERS]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. Suggest 0.045 [1.14] O hole for contact termination positions. Suggest 0.123 0.003 [3.12 0.08] O hole for mounting connector with push-on fasteners. PROFESSIONAL QUALITY FIXED CONTACT STANDARD DENSITY D-SUBMINIATURE D-Sub Positronic Industries connectpositronic.com ORDERING INFORMATION - CODE NUMBERING SYSTEM Specify Complete Connector By Selecting An Option From Step 1 Through 8 EXAMPLE 1 2 3 4 5 6 7 8 9 10 MD 25 F 59 R7 N T6 X /AA -14 STEP 1 - BASIC SERIES STEP 10 - SPECIAL OPTIONS MD series. -14 - 0.000030 [0.76] gold over nickel. -15 - 0.000050 [1.27] gold over nickel. STEP 2 - CONNECTOR VARIANTS 9, 15, 25, 29, 37, 50 MD SERIES STEP CONTACT TECHNICAL SALES FOR SPECIAL OPTIONS STEP 3 - CONNECTOR GENDER 5/ Di * Compliant EC IT RoHS IES POS NIC INDU U rE 2 - Solder cup. 3 - Solder, Straight Printed Board Mount with 0.150 [3.81] Tail Length. 32 - Solder, Straight Printed Board Mount with 0.375 [9.52] Tail Length. 33 - Solder, Straight Printed Board Mount with 0.500 [12.70] tail length. 4 - Solder, Right Angle (90) Printed Board Mount with 0.450 [11.43] Contact Extension. 5 - Solder, Right Angle (90) Printed Board Mount with 0.283 [7.19] Contact Extension. 59 - Solder, Right Angle (90) Printed Board Mount with 0.545 [13.84] Contact Extension. 6 - Wrap Post. O TR * pe STEP 4 - CONTACT TERMINATION TYPE R S M - Male F - Female rec tive 2002 /9 STEP 9 - ENVIRONMENTAL COMPLIANCE OPTIONS /AA - Compliant per EU Directive 2002/95/EC (RoHS) NOTE: If compliance to environmental legislation is not required, this step will not be used. Example: MD25F59R7NT6X STEP 8 - Shell Options 0 *4 S X Z - Zinc plated, with chromate seal. Stainless steel, passivated. Tin plated. Tin plated and dimpled (male connectors only). *1 STEP 5 - MOUNTING STYLE 0 02 B B3 B7 B8 F P P2 R - R2 R3 R4 R5 R6 R7 R8 S S2 S5 S6 - S7 - Mounting Hole, 0.120 [3.05] O. Mounting Hole, 0.154 [3.91] O. Bracket, Mounting, Right Angle (90) Metal. Bracket, Mounting, Right Angle (90) Metal with Cross Bar. Bracket, Mounting, Right Angle (90) Plastic. Bracket, Mounting, Right Angle (90) Plastic with Cross Bar. Float Mounts, Universal. Threaded Post, Brass, 0.225 [5.71] Length. Threaded Post, Nylon, 0.225 [5.71] Length. Bracket, Mounting, Right Angle (90) Metal, Swaged to Connector with 4-40 Thread Fixed Female Jackscrews. Bracket, Mounting, Right Angle (90) Metal, Swaged to Connector with 4-40 Thread Fixed Female Jackscrews with Cross Bar. Bracket, Mounting, Right Angle (90) Metal, Swaged to Connector with 0.120 [3.05] O Mounting Hole. Bracket, Mounting, Right Angle (90) Metal, Swaged to Connector with 4-40 Threads. Bracket, Mounting, Right Angle (90) Metal, Swaged to Connector with 4-40 Locknut. Bracket, Mounting, Right Angle (90) Metal, Swaged to Connector with 0.120 [3.05] O Mounting Hole with Cross Bar. Bracket, Mounting, Right Angle (90) Metal, Swaged to Connector with 4-40 Threads with Cross Bar. Bracket, Mounting, Right Angle (90) Metal, Swaged to Connector with 4-40 Locknut with Cross Bar. Swaged Spacer, 4-40 Threads, 0.225 [5.71] Length. Swaged Spacer, 4-40 Threads, 0.125 [3.18] Length. Swaged Locknut, 4-40 Threads. Swaged Spacer with Push-on Fastener, 4-40 Threads, 0.225 [5.71] Length. Swaged Spacer with Push-on Fastener for use with Ferrite Inductor, 4-40 Threads, 0.375 [9.53] Length. *1 For additional information on accessories listed in steps 5, 6 and 7, see Accessory Catalog. *2 Ferrite inductor is available on contact types 32, 4, 59 and 6 only. For more information on ferrite inductors, see page 7. *3 VL, V3 and V5 locking systems are not available for connector variants 37 and 50. Jackscrews are highly recommended to minimize damage to contacts on variants with high mating forces. *4 For stainless steel dimpled male versions contact Technical Sales. *5 AN and AC hood are not available for connector variant 29. Consult Technical Sales for availability. *1 STEP 7 - LOCKING AND POLARIZING SYSTEMS 0 *3 V3 3 * V5 *3 VL T T2 T6 E E2 E3 E6 - None. Lock Tab, connector front panel mounted. Lock Tab, connector rear panel mounted. Lock Lever, used with Hoods only. Fixed Female Jackscrews. Fixed Female Jackscrews. Fixed Male and Female Polarized Jackscrews. Rotating Male Jackscrews. Rotating Male Screw Locks. Rotating Male with Internal Hex for 3/32 Hex Drives Rotating Male and Female Polarized Jackscrews. *1 STEP 6 - HOODS AND PUSH-ON FASTENERS 0 J L Y - Y6 ZHG* AN *5 AC W5 N*2 F 2 * Q- None. Hood, Top Opening, Plastic. Hood, Side Opening, Plastic. Hood, Top Opening, Plastic with Rotating Male Jackscrews. Available in size 50 only. Hood, Top Opening, Plastic with Rotating Male and Female Polarized Jackscrews. Available in size 50 only. Hood, Top or Side Opening, Robust and Extended Height, Composite and Plastic with Rotating Male Jackscrews. Available in size 9, 15, 25, 37, and 50 only. Hood, Top Opening, Metal. Available in size 15, 25, 37, and 50 only. Hood, EMI/RFI, Metal. Available in size 9, 15, 25, 37, and 50 only. Lightweight Aluminum Hood, nickel finish. Lightweight Aluminum Hood, no finish. Hood, Top or Side Opening, Plastic. Available in size 9, 15, and 25 only. Push-on fastener for right angle (90) mounting brackets. Ferrite inductor. Ferrite inductor for use with push-on fastener and right angle (90) mounting brackets. DIMENSIONS ARE IN INCHES [MILLIMETERS]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. 10