MATERIALS AND FINISHES:
Insulator: Nylon resin, UL 94V-0, black color.
Contacts: Precision machined copper alloy.
Contact Plating: Professional performance Gold flash over
nickel plate. Other finishes available upon
request.
Shells: Steel or brass with tin plate; zinc plate with
chromate seal, stainless steel passivated.
Other materials and finishes available upon
request.
Mounting Spacers
and Brackets: Nylon; copper alloy or steel with zinc plate and
chromate seal or tin plate; phosphor bronze
with tin plate; stainless steel, passivated.
Push-On Fasteners: Phosphor bronze or beryllium copper with tin
plate.
Jackscrew Systems: Brass or steel with zinc plate and chromate
seal or clear zinc plate or tin plate; stainless
steel, passivated..
Vibration Lock Systems: Slide lock and lock tabs, steel with nickel
plate.
Hoods: Composite and plastic, UL 94V-0; brass or
steel with zinc plate and chromate seal; alu-
minum or aluminum with electroless nickel
plate; die cast zinc.
Non-magnetic versions are available, contact Technical Sales.
MECHANICAL CHARACTERISTICS:
Fixed Contacts: Size 20 contact, male - 0.040 inch [1.02mm]
mating diameter. Female contact - rugged
open entry design.
Contact Retention
In Insulator: 6 lbs. [27N]
Resistance To Solder 500°F [260°C] for 10 seconds duration per
Iron Heat: IEC 60512-6.
MELO-D SERIES TECHNICAL CHARACTERISTICS
5DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
MD SERIES
D-Sub
Positronic Industries
connectpositronic.com
PROFESSIONAL QUALITY
FIXED CONTACT
STANDARD DENSITY D-SUBMINIATURE
MD SERIES
Size 20 Contacts, Fixed
IEC Publication 60807-2
Performance Level Two
U.L. Recognized CSA Recognized
File #E49351 File #LR54219
Telecommunication
U.L. File #14098
Melo-D series connectors are professional quality connectors
recommended for use in sheltered, non-corrosive indoor or out-
door environments having normal ventilation, but without temper-
ature or humidity controls. These fixed contact connectors meet
the dimensional and performance requirements of IEC 60807-2,
Performance Level Two.
Melo-D series connectors utilize precision machined contacts
which are fixed within the connector body. The female contact is
an open entry design contact, precision machined of high tensile
phosphor bronze.
Six standard connector variants are offered in arrangements of 9,
15, 25, 29, 37 and 50 contacts. Each Melo-D connector variant is
available with contact terminations for solder cup, wrap post, and
straight and right angle (90°) printed board mount terminations featur-
ing a choice of three printed board footprints. Melo-D series connec-
tors are mateable and compatible with all D-subminiature connectors
conforming to IEC 60807-2, IEC 60807-3 and MIL-DTL-24308.
A wide assortment of printed board mounting hardware, cable
support hoods and locking systems is available from stock.
Contact Solder cup contacts - 0.042 inch [1.06mm]
Terminations: minimum hole diameter for 20 AWG
[0.5mm2] wire maximum.
Straight Printed Board Mount - 0.028 inch
[0.71mm] termination diameter.
Right Angle (90°) Printed Board Mount -
0.028 inch [0.71mm] termination diameter
for all printed board footprints.
Wrap Post - 0.025 inch [0.64mm] square.
Shells: Male shells may be dimpled for EMI/ESD
ground paths.
Polarization: Trapezoidally shaped shells and polarized
jackscrews.
Mounting To Angle Brackets: Jackscrews and riveted fasteners with a
0.120 inch [3.05mm] clearance hole, and
threaded riveted fasteners with 4-40 threads
and nylon lock inserts.
Mounting To Printed Board: Rapid installation push-on fasteners and
threaded posts.
Locking Systems: Jackscrews and vibration locking systems.
Mechanical Operations: 500 operations minimum per IEC 60512-5.
ELECTRICAL CHARACTERISTICS:
Contact Current Rating: 7.5 amperes nominal.
Initial Contact
Resistance: 0.008 ohms maximum.
Insulator Resistance: 5 G ohms.
Proof Voltage: 1000 V r.m.s.
Clearance and Creepage
Distance [minimum]: 0.039 inch [1.0mm].
Working Voltage: 300 V r.m.s.
CLIMATIC CHARACTERISTICS:
Temperature Range: -55°C to +125°C.
Damp Heat, Steady
State: 10 days.
MD series connectors can be supplied with interfacial seals and sealed
between shell and insulator. This provides an additional
degree of moisture resistance. See Accessories catalog for details.
P
O
S
I
T
R
O
N
I
C
I
N
D
U
S
T
R
I
E
S
•
p
e
r
E
U
D
i
r
e
c
t
i
v
e
2
0
0
2
/
9
5
/
E
C
•
RoHS
RoHS
Compliant
For RoHS options
see page 10.
6
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
MD SERIES
D-Sub
Positronic Industries
connectpositronic.com
PROFESSIONAL QUALITY
FIXED CONTACT
STANDARD DENSITY D-SUBMINIATURE
222120
312
2423 26 2725 3028 29 32 3331
654 87 12111091413
3634 35 37
171615 1918
383534 3736 39 40 4341 42
5
18 20 2119
21 43
242322 272625
761098
45 4644 49
47 48 50
333028 29 3231
131211 161514 17
9876
15423
1514
121110913
32
1876
54
14
12
252423
22212018
17 19
1615
8
76
543 131210
911
21
11 12
20
21
26
1716
242322
13 14 15
25 2927 28
19
18
76543 1098
C
A
E
B
B1
D
D1
K
M
G
H
0.220 [5.59]
Max.
10° Typ.
0.120±0.010 [3.05±0.25]
0.032 [0.81]
Total diametral float Ø0.086
+0.005
-0.000 [Ø2.18
+0.13
-0.00 ]
Mounting hole, two places
0.036±0.008
[0.91±0.20]
0.050±0.010
[1.27±0.25]
for stainless steel shell (0 option)
two places (02 option)
Ø0.120±0.005 [Ø3.05±0.13]
Mounting hole, two places
Ø0.120±0.005 [Ø3.05±0.13]
Mounting hole, two places
Ø0.154 [3.91] Mounting hole,
CONTACT VARIANTS
FACE VIEW OF MALE OR REAR VIEW OF FEMALE
MD 9 MD 15 MD 25
MD 29 MD 37 MD 50
STANDARD SHELL ASSEMBLY
OPTIONAL SHELL ASSEMBLY
WITH UNIVERSAL FLOAT MOUNTS (F)
OPTIONAL SHELL ASSEMBLY (0, 02)
CONNECTOR
VARIANT SIZES
A
±0.015
[0.38]
B
±0.005
[0.13]
B1
±0.005
[0.13]
C
±0.005
[0.13]
D
±0.005
[0.13]
D1
±0.005
[0.13]
E
±0.015
[0.38]
G
±0.010
[0.25]
H
±0.010
[0.25]
K
±0.005
[0.13]
M
±0.010
[0.25]
9 M 1.213
[30.81]
0.666
[16.92]
0.984
[24.99]
0.329
[8.36]
0.494
[12.55]
0.759
[19.28]
0.422
[10.72]
0.233
[5.92]
0.422
[10.72]
9 F 1.213
[30.81]
0.643
[16.33]
0.984
[24.99]
0.311
[7.90]
0.494
[12.55]
0.759
[19.28]
0.422
[10.72]
0.243
[6.17]
0.429
[10.90]
15 M 1.541
[39.14]
0.994
[25.25]
1.312
[33.32]
0.329
[8.36]
0.494
[12.55]
1.083
[27.51]
0.422
[10.72]
0.233
[5.92]
0.422
[10.72]
15 F 1.541
[39.14]
0.971
[24.66]
1.312
[33.32]
0.311
[7.90]
0.494
[12.55]
1.083
[27.51]
0.422
[10.72]
0.243
[6.17]
0.429
[10.90]
25 M 2.088
[53.04]
1.534
[38.96]
1.852
[47.04]
0.329
[8.36]
0.494
[12.55]
1.625
[41.28]
0.422
[10.72]
0.230
[5.84]
0.426
[10.82]
25 F 2.088
[53.04]
1.511
[38.38]
1.852
[47.04]
0.311
[7.90]
0.494
[12.55]
1.625
[41.28]
0.422
[10.72]
0.243
[6.17]
0.429
[10.90]
29 M 1.770
[44.96]
1.274
[32.36]
1.534
[38.96]
0.450
[11.43]
0.605
[15.37]
1.322
[33.58]
0.539
[13.69]
0.217
[5.51]
0.426
[10.82]
29 F 1.770
[44.96]
1.251
[31.78]
1.534
[38.96]
0.431
[10.95]
0.605
[15.37]
1.322
[33.58]
0.539
[13.69]
0.237
[6.02]
0.429
[10.90]
37 M 2.729
[69.32]
2.182
[55.42]
2.500
[63.50]
0.329
[8.36]
0.494
[12.55]
2.272
[57.71]
0.422
[10.72]
0.230
[5.84]
0.426
[10.82]
37 F 2.729
[69.32]
2.159
[54.84]
2.500
[63.50]
0.311
[7.90]
0.494
[12.55]
2.272
[57.71]
0.422
[10.72]
0.243
[6.17]
0.429
[10.90]
50 M 2.635
[66.93]
2.079
[52.81]
2.406
[61.11]
0.441
[11.20]
0.605
[15.37]
2.178
[55.32]
0.534
[13.56]
0.230
[5.84]
0.426
[10.82]
50 F 2.635
[66.93]
2.064
[52.43]
2.406
[61.11]
0.423
[10.74]
0.605
[15.37]
2.178
[55.32]
0.534
[13.56]
0.243
[6.17]
0.429
[10.90]
MD SERIES
7DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
MD SERIES
D-Sub
Positronic Industries
connectpositronic.com
PROFESSIONAL QUALITY
FIXED CONTACT
STANDARD DENSITY D-SUBMINIATURE
Swaged spacer with
push-on fastener
phosphor bronze
Fixed female jackscrews
ØD
0.225 [5.71]
L
0.010 [0.25]
NOMINAL
Fixed
female
jackscrews
0.495 [12.57]
0.720 [18.29]
0.025 [0.64] Sq.
0.135±0.005
[3.43±0.13]
Ferrite inductor bar
Ferrite Inductor Bar
L
Swaged spacer with push-on
fastener phosphor bronze
A
Fixed female jackscrews
0.010 [0.25] Nominal
0.352 [8.94]
20 AWG max.
[0.5 mm ]
0.135 [3.43]
2
Fixed female jackscrews
Fixed male
jackscrew
Fixed female
jackscrew
MD SERIES
Typical Part Number: MD15M200T6Z
Typical Part Number: MD15M200T2Z
Typical Part Number: MD25F3S60T0
Fixed male and female polarized jackscrews available.
Specify code T6 in step 7 of ordering information.
For solder cup contacts, specify
code 2 in step 4
of ordering information.
For wrap post contacts,
specify code 6 in step 4
of ordering information.
STRAIGHT PRINTED BOARD MOUNT CONNECTOR
CODE 3, 32 AND 33
FILTERING CHARACTERISTICS
ATTENUATION [dB]
IMPEDANCE [OHMS]
FREQUENCY
* NO-LOAD CONDITION
MD25M6S50T0
Typical Part Number: MD15F600T20
WRAP POST CONNECTOR
CODE 6
RIGHT ANGLE (90°)
PRINTED BOARD MOUNT CONNECTOR
STRAIGHT PRINTED BOARD MOUNT CONNECTOR
MATERIAL: Nickel zinc ceramic
IMPEDANCE
ATTENUATION*
For straight printed board mount
contacts, specify code number in
step 4 of ordering information.
Specify code F or Q in step 6 of ordering
information. F for ferrite inductor and Q
for ferrite inductor with push-on fastener.
SOLDER CUP CONNECTOR
CODE 2
FERRITE INDUCTOR BAR FOR EMI/RFI NOISE SUPPRESSION
CODE F AND Q
CODE
NUMBER LØD
30.150 [3.81] 0.028 [0.71]
32 0.375 [9.53] 0.028 [0.71]
33 0.500 [12.70] 0.028 [0.71]
SERIES CODE
NO. A L
MD, MDX, HDC
32
0.375 [9.53] 0.240 [6.10]
ODD 0.375 [9.53] 0.165 [4.19]
DD 0.515 [13.08] 0.165 [4.19]
ED, HDC 36 0.375 [9.53] 0.101 [2.57]
MD, MDX 4---------- ----------
ODD 5---------- ----------
MD 59 ---------- ----------
MD, HDC 60.375 [9.53] 0.360 [9.14]
NEW!
8
MD SERIES
D-Sub
Positronic Industries
connectpositronic.com
PROFESSIONAL QUALITY
FIXED CONTACT
STANDARD DENSITY D-SUBMINIATURE
Specify code 59
in step 4 of
ordering information 0.112 [2.84]
Typ.
D
0.112 [2.84] Typ.
0.112 [2.84] Typ.
D
A
B
±0.008
[0.20]
j
ackscrews
female
Fixed
X 0.233 [5.92]
Oval hole Typ.
0.125 [3.18]
E
C
713 12 11 10 9 8
2021222325 24
654321
141516171819
Numbering shown is rear view
of male and face view of female.
Ø0.028 [0.71]
0.125 [3.18]
Nominal
0.112 [2.84] Typ.
0.112 [2.84] Typ.
D
jackscrews
female
Fixed B
±0.008
[0.20]
A
C
Specify code 5
in step 4 of
ordering information
D
0.112 [2.84]
Typ.
Numbering shown is rear view
of male and face view of female.
0.160 [4.06]
Nominal
Ø0.028 [0.71]
25 192021222324
13 76
8
9101112
1415161718
12345
Push-on fastener
beryllium copper
RIGHT ANGLE (90°) PRINTED BOARD MOUNT CONNECTOR
CODE 5, 0.283 [7.19] CONTACT EXTENSION
MD**5R4*** 0.283 [7.19] CONTACT EXTENSION
PART NUMBER A B C D
MD9*5R4*** 1.204
[30.58]
0.984
[24.99]
0.339
[8.61]
0.283
[7.19]
MD15*5R4*** 1.532
[38.91]
1.312
[33.32]
0.339
[8.61]
0.283
[7.19]
MD25*5R4*** 2.072
[52.63]
1.852
[47.04]
0.339
[8.61]
0.283
[7.19]
MD29*5R4*** 1.754
[44.55]
1.534
[38.96]
0.395
[10.03]
0.283
[7.19]
MD37*5R4*** 2.720
[69.09]
2.500
[63.50]
0.339
[8.61]
0.283
[7.19]
MD50*5R4*** 2.626
[66.70]
2.406
[61.11]
0.395
[10.03]
0.283
[7.19]
Typical Part Number:
MD25M59B0T2X
Typical Part Number:
MD29M59B0T2X
Typical Part Number:
MD50M5R4NT2X
Typical Part Number:
MD25M5R4NT2X
RIGHT ANGLE (90°) PRINTED BOARD MOUNT CONNECTOR
CODE 59, 0.545 [13.84] CONTACT EXTENSION
MD50*59B*** 2.626
[66.70]
2.406
[61.11]
0.275
[6.99]
0.545
[13.84]
PART NUMBER A B C D
MD9*59B*** 1.204
[30.58]
0.984
[24.99]
0.275
[6.99]
0.545
[13.84]
MD15*59B*** 1.532
[38.91]
1.312
[33.32]
0.275
[6.99]
0.545
[13.84]
MD25*59B*** 2.072
[52.63]
1.852
[47.04]
0.275
[6.99]
0.545
[13.84]
MD29*59B*** 1.754
[44.55]
1.534
[38.96]
0.275
[6.99]
0.545
[13.84]
MD37*59B*** 2.720
[69.09]
2.500
[63.50]
0.275
[6.99]
0.545
[13.84]
0.657
[16.69]
E
0.601
[15.27]
0.601
[15.27]
0.601
[15.27]
0.657
[16.69]
0.601
[15.27]
MD**59B*** 0.545 [13.84] CONTACT EXTENSION
MD SERIES
9DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
MD SERIES
D-Sub
Positronic Industries
connectpositronic.com
PROFESSIONAL QUALITY
FIXED CONTACT
STANDARD DENSITY D-SUBMINIATURE
0.216 [5.49]
0.108 [2.74]
Typ.
0.162 [4.11]
0.054 [1.37]
Typ.
Sym. 0.656
[16.66] 0.378 [9.60]
0.324 [8.23]
0.108 [2.74]
Typ.
0.054 [1.37]
Typ.
0.926 [23.52] 0.652 [16.56]
Sym. Sym.
0.109 [2.77]
Typ.
0.598 [15.19]
0.055 [1.40]
Typ.
1.250 [31.75] 0.978 [24.84]
0.924 [23.47]
0.055 [1.40]
Typ.
0.109
[2.77]
Typ.
Sym. 1.203
[30.56]
0.870
[22.10]
0.109
[2.77]
Typ.
0.055 [1.40]
Typ.
Sym.
0.815 [20.70]
Sym. 0.432
[10.97]
0.767
[19.48]
0.054
[1.37]
Typ. 0.486
[12.34]
0.108 [2.74]
Typ.
0.492
[12.50]
0.112
[2.84]
0.112
[2.84]
0.112
[2.84]
0.112
[2.84]
0.224
[5.69]
0.112
[2.84]
0.224
[5.69]
0.112
[2.84]
Specify code 4
in step 4 of
ordering information 0.112 [2.84]
Typ.
D
0.112 [2.84] Typ.
0.112 [2.84] Typ.
D
713 12 11 10 9 8
2021222325 24
654321
141516171819
Numbering shown is rear view
of male and face view of female.
C
A
B
±0.008
[0.20]
jackscrews
female
Fixed
Ø0.125
[3.18]
Typ.
Ø0.028 [0.71]
0.160 [4.06]
Nominal
MD SERIES
RIGHT ANGLE (90°) PRINTED BOARD MOUNT CONNECTOR
CODE 4, 0.450 [11.43] CONTACT EXTENSION
RIGHT ANGLE (90°) AND STRAIGHT PRINTED BOARD CONTACT HOLE PATTERN
MOUNT CONNECTOR WITH MATING FACE POSITIONED TO FOLLOW DIRECTION OF ARROW.
Typical Part Number:
MD25M4B0T20 Typical Part Number:
MD50M4B0T20
MD**4B*** 0.450 [11.43] CONTACT EXTENSION
MD50*4B*** 2.626
[66.70]
2.406
[61.11]
0.562
[14.27]
0.450
[11.43]
PART NUMBER A B C D
MD9*4B*** 1.204
[30.58]
0.984
[24.99]
0.506
[12.85]
0.450
[11.43]
MD15*4B*** 1.532
[38.91]
1.312
[33.32]
0.506
[12.85]
0.450
[11.43]
MD25*4B*** 2.072
[52.63]
1.852
[47.04]
0.506
[12.85]
0.450
[11.43]
MD29*4B*** 1.754
[44.55]
1.534
[38.96]
0.562
[14.27]
0.450
[11.43]
MD37*4B*** 2.720
[69.09]
2.500
[63.50]
0.506
[12.85]
0.450
[11.43]
MD9 MD15 MD25
MD50MD37MD29
SUGGESTED PRINTED BOARD HOLE SIZES:
Suggest 0.045 [1.14] Ø hole for contact termination positions.
Suggest 0.123 ±0.003 [3.12 ±0.08] Ø hole for mounting connector with push-on fasteners.
10
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
MD SERIES
D-Sub
Positronic Industries
connectpositronic.com
PROFESSIONAL QUALITY
FIXED CONTACT
STANDARD DENSITY D-SUBMINIATURE
*1For additional information on accessories listed in steps 5, 6 and 7, see
Accessory Catalog.
*2Ferrite inductor is available on contact types 32, 4, 59 and 6 only. For
more information on ferrite inductors, see page 7.
*3VL, V3 and V5 locking systems are not available for connector variants
37 and 50. Jackscrews are highly recommended to minimize damage
to contacts on variants with high mating forces.
*4For stainless steel dimpled male versions contact Technical Sales.
*5AN and AC hood are not available for connector variant 29. Consult
Technical Sales for availability.
MD SERIES
ORDERING INFORMATION - CODE NUMBERING SYSTEM
Specify Complete Connector By Selecting An Option From Step 1 Through 8
STEP 3 - CONNECTOR GENDER
M - Male
F - Female
123456789
MD 25 F59 R7 NT6 X/AA
10
-14
STEP 1 - BASIC SERIES
MD series.
STEP 10 - SPECIAL OPTIONS
-14 - 0.000030 [0.76µ] gold over
nickel.
-15 - 0.000050 [1.27µ] gold over
nickel.
CONTACT TECHNICAL SALES
FOR SPECIAL OPTIONS
STEP 8 - Shell Options
0 - Zinc plated, with chromate seal.
*4 S - Stainless steel, passivated.
X - Tin plated.
Z - Tin plated and dimpled (male connectors only).
*1 STEP 6 - HOODS AND PUSH-ON FASTENERS
0 - None.
J - Hood, Top Opening, Plastic.
L - Hood, Side Opening, Plastic.
Y - Hood, Top Opening, Plastic with Rotating Male Jackscrews.
Available in size 50 only.
Y6 - Hood, Top Opening, Plastic with Rotating Male and Female
Polarized Jackscrews. Available in size 50 only.
Z - Hood, Top or Side Opening, Robust and Extended Height,
Composite and Plastic with Rotating Male Jackscrews. Available in
size 9, 15, 25, 37, and 50 only.
H - Hood, Top Opening, Metal. Available in size 15, 25, 37, and 50 only.
G - Hood, EMI/RFI, Metal. Available in size 9, 15, 25, 37, and 50 only.
*5 AN - Lightweight Aluminum Hood, nickel finish.
*5 AC - Lightweight Aluminum Hood, no finish.
W - Hood, Top or Side Opening, Plastic. Available in size 9, 15, and
25 only.
N - Push-on fastener for right angle (90°) mounting brackets.
*2 F - Ferrite inductor.
*2 Q - Ferrite inductor for use with push-on fastener and right angle (90°)
mounting brackets.
*1 STEP 5 - MOUNTING STYLE
0 - Mounting Hole, 0.120 [3.05] Ø.
02 - Mounting Hole, 0.154 [3.91] Ø.
B - Bracket, Mounting, Right Angle (90°) Metal.
B3 - Bracket, Mounting, Right Angle (90°) Metal with Cross Bar.
B7 - Bracket, Mounting, Right Angle (90°) Plastic.
B8 - Bracket, Mounting, Right Angle (90°) Plastic with Cross Bar.
F - Float Mounts, Universal.
P - Threaded Post, Brass, 0.225 [5.71] Length.
P2 - Threaded Post, Nylon, 0.225 [5.71] Length.
R - Bracket, Mounting, Right Angle (90°) Metal, Swaged to
Connector with 4-40 Thread Fixed Female Jackscrews.
R2 - Bracket, Mounting, Right Angle (90°) Metal, Swaged to
Connector with 4-40 Thread Fixed Female Jackscrews with
Cross Bar.
R3 - Bracket, Mounting, Right Angle (90°) Metal, Swaged to
Connector with 0.120 [3.05] Ø Mounting Hole.
R4 - Bracket, Mounting, Right Angle (90°) Metal, Swaged to
Connector with 4-40 Threads.
R5 - Bracket, Mounting, Right Angle (90°) Metal, Swaged to
Connector with 4-40 Locknut.
R6 - Bracket, Mounting, Right Angle (90°) Metal, Swaged to
Connector with 0.120 [3.05] Ø Mounting Hole with Cross Bar.
R7 - Bracket, Mounting, Right Angle (90°) Metal, Swaged to
Connector with 4-40 Threads with Cross Bar.
R8 - Bracket, Mounting, Right Angle (90°) Metal, Swaged to
Connector with 4-40 Locknut with Cross Bar.
S - Swaged Spacer, 4-40 Threads, 0.225 [5.71] Length.
S2 - Swaged Spacer, 4-40 Threads, 0.125 [3.18] Length.
S5 - Swaged Locknut, 4-40 Threads.
S6 - Swaged Spacer with Push-on Fastener, 4-40 Threads, 0.225
[5.71] Length.
S7 - Swaged Spacer with Push-on Fastener for use with Ferrite
Inductor, 4-40 Threads, 0.375 [9.53] Length.
STEP 4 - CONTACT TERMINATION TYPE
2 - Solder cup.
3 - Solder, Straight Printed Board Mount with 0.150
[3.81] Tail Length.
32 - Solder, Straight Printed Board Mount with 0.375
[9.52] Tail Length.
33 - Solder, Straight Printed Board Mount with 0.500
[12.70] tail length.
4 - Solder, Right Angle (90°) Printed Board Mount with
0.450 [11.43] Contact Extension.
5 - Solder, Right Angle (90°) Printed Board Mount with
0.283 [7.19] Contact Extension.
59 - Solder, Right Angle (90°) Printed Board Mount with
0.545 [13.84] Contact Extension.
6 - Wrap Post.
STEP 2 - CONNECTOR VARIANTS
9, 15, 25, 29, 37, 50
STEP
EXAMPLE
STEP 9 - ENVIRONMENTAL
COMPLIANCE
OPTIONS
/AA - Compliant per EU Directive
2002/95/EC (RoHS)
P
O
S
I
T
R
O
N
I
C
I
N
D
U
S
T
R
I
E
S
•
p
e
r
E
U
D
i
r
e
c
t
i
v
e
2
0
0
2
/
9
5
/
E
C
•
RoHS
RoHS
Compliant
*1 STEP 7 - LOCKING AND POLARIZING SYSTEMS
0 - None.
*3 V3 - Lock Tab, connector front panel mounted.
*3 V5 - Lock Tab, connector rear panel mounted.
*3 VL - Lock Lever, used with Hoods only.
T - Fixed Female Jackscrews.
T2 - Fixed Female Jackscrews.
T6 - Fixed Male and Female Polarized Jackscrews.
E - Rotating Male Jackscrews.
E2 - Rotating Male Screw Locks.
E3 - Rotating Male with Internal Hex for 3/32 Hex Drives
E6 - Rotating Male and Female Polarized Jackscrews.
NOTE: If compliance to environmental
legislation is not required, this step will not
be used. Example: MD25F59R7NT6X