318
Model no.
Rated voltage
Operating voltage range
PWM duty
cycle*
[%]
Rated current
Rated input
Rated speed Max. airow
Max. static pressure
SPL
Operating temperature
Expected life
[V] [V] [A] [W] [min-1]
[m³/min]
[CFM] [Pa] [inchH²O] [dB (A)] [˚C] [h]
9WL1412P5G001
12 10.2 to 13.8
100 5.16 62 7500 9.0 318 655 2.63 69
-20 to +70
100000/60˚C
20 0.31 3.72 2300 2.75 97 80 0.32 38
9WL1412P5S001 100 1.83 22 5000 6.0 212 295 1.18 57
20 0.31 3.72 2300 2.75 97 80 0.32 38
9WL1424P5G001
24 20.4 to 27.6
100 2.58 62 7500 9.0 318 655 2.63 69
20 0.16 3.84 2300 2.75 97 80 0.32 38
9WL1424P5S001 100 0.91 22 5000 6.0 212 295 1.18 57
20 0.16 3.84 2300 2.75 97 80 0.32 38
9WL1448P5G001
48 40.8 to 55.2
100 1.29 62 7500 9.0 318 655 2.63 69
20 0.12 5.76 2300 2.75 97 80 0.32 38
9WL1448P5S001 100 0.45 22 5000 6.0 212 295 1.18 57
20 0.12 5.76 2300 2.75 97 80 0.32 38
* PWM frequency: 25 kHz. Fan does not rotate when PWM duty cycle is 0%.
The models listed below have pulse sensors.
Model no.
Rated voltage
Operating voltage range
Rated current
Rated input Rated speed Max. airow
Max. static pressure
SPL
Operating temperature
Expected life
[V] [V] [A] [W] [min-1]
[m³/min]
[CFM] [Pa] [inchH²O] [dB (A)] [˚C] [h]
9WL1412A5001 12 10.2 to 13.8 2.61 31.4 5700 6.9 243.8 500 2 61
-20 to +70
100000/60˚C
9WL1412H5001 1 12 4100 4.9 173.1 260 1.04 52
9WL1424H5001 24 20.4 to 27.6 0.55 13.2 4100 4.9 173.1 260 1.04 52
9WL1424M5001 0.23 5.52 2600 3.1 109.5 100 0.4 40
9WL1448H5001 48 40.8 to 55.2 0.31 14.9 4100 4.9 173.1 260 1.04 52
The following sensor and control options are available for selection.
Available for all models.
Differs according to the model. Refer to the table on pp. 579 to 580.
Splash Proof Fan
140×140×51 mm
San Ace 140W 9WL type
■General Specications
・ Material ………………………………………… Frame: Aluminum (Black coating), Impeller: Plastic (Flammability: UL 94V-0)
・ Expected life …………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in indoor free air
at 60˚C, rated voltage)
・ Motor protection function ………………… Locked rotor burnout protection, Reverse polarity protection
For details, please refer to p. 547.
・ Dielectric strength …………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
・ Insulation resistance ………………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
・ Sound pressure level (SPL) ……………… At 1 m away from the air inlet
・ Storage temperature ……………………… -30 to +70˚C (Non-condensing)
・ Lead wire ……………………………………… Red Black Sensor Yellow Control Brown
(For models without PWM control function, there is no speed control wiring.)
・ Mass ……………………………………………… 930 g
・ Ingress protection …………………………… IP68
■Specications
The models listed below have pulse sensors with PWM control function.