MIL-5015 Type Connectors with PCB contacts MS3102R box mounting receptacle S A THREAD R B Z PCB TAIL STICKOUT R S N .030 .001 DIA. FOR SIZE 16 CONTACTS T 4 HOLES M L K HOW TO ORDER * Order by applicable 10- part number in table below. 10- prefix designates olive drab cadmium plated connector shell. (For availability of other finishes consult Amphenol, Sidney, NY) * Add insert arrangement to end of number. Refer to insert availability chart on page 4 and pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for pins in normal position, S for sockets in normal position. See page 26 for alternate rotation letter to use. Example part number: 10-602462-3P designates shell size 10SL with a 10SL-3 insert and pin contacts in normal position. * Z dimension is determined by contact type in the insert arrangement. * Most common options are shown; other options are available. Shell Size Part Number A Thread Class 2A Reverse Bayonet GT Series connectors that incorporate 5015 inserts can also be supplied with printed circuit board contacts. Consult Amphenol for more information. B Min. Full Thread K +.020 -.010 L +.000 -.010 M +.010 -.000 N Dia. +.010 -.000 R .005 Z .045 S .031 T Dia. +.004 -.002 Size 16 Contacts 8S 10-602460-XXX .5000-28 UNEF .391 .672 .297 .562 .375 .594 .875 .120 .188 10S 461-XXX .6250-24 NEF .391 .672 .297 .562 .500 .719 1.000 .120 .188 10SL 462-XXX .6250-24 NEF .391 .672 .297 .562 .625 .719 1.000 .120 .188 12S 463-XXX .7500-20 UNEF .450 .672 .297 .562 .625 .812 1.094 .120 .188 12 464-XXX .7500-20 UNEF .625 .860 .484 .750 .625 .812 1.094 .120 .188 14S 465-XXX .8750-20 UNEF .450 .672 .297 .562 .750 .906 1.188 .120 .188 14 466-XXX .8750-20 UNEF .625 .860 .484 .750 .750 .906 1.188 .120 .188 16S 467-XXX 1.0000-20 UNEF .450 .672 .297 .562 .875 .969 1.281 .120 .188 16 468-XXX 1.0000-20 UNEF .625 .860 .484 .750 .875 .969 1.281 .120 .188 18 469-XXX 1.1250-18 NEF .625 .891 .453 .750 1.000 1.062 1.375 .120 .188 20 470-XXX 1.2500-18 NEF .625 .891 .453 .750 1.125 1.156 1.500 .120 .188 22 471-XXX 1.3750-18 NEF .625 .891 .453 .750 1.250 1.250 1.625 .120 .188 24 472-XXX 1.5000-18 NEF .625 .953 .453 .812 1.375 1.375 1.750 .147 .188 28 473-XXX 1.7500-18 NS .625 .953 .453 .812 1.625 1.562 2.000 .147 .188 32 474-XXX 2.0000-18 NS .625 1.031 .438 .875 1.875 1.750 2.250 .173 .188 36 475-XXX 2.2500-16 UN .625 1.031 .438 .875 2.062 1.938 2.500 .173 .188 40 476-XXX 2.5000-16 UN .625 1.031 .438 .875 2.312 2.188 2.750 .173 .188 All dimensions for reference only. 43