43
All dimensio ns f or ref ere nce only .
Shell
Siz e Par t N u m b e r
A
Thread
Class 2A
B
Min. Full
Thread
K
+.020
–.010
L
+.000
–.010
M
+.010
–.000
N Dia.
+.010
–.000 R
±.005 S
±.031
T Dia.
+.004
–.002
Z
±.045
Size 16
Contacts
8S 10-602460-XXX .5000-28 UNEF .391 .672 .297 .562 .375 .594 .875 .120 .188
10S 461-XXX .6250-24 NEF .391 .672 .297 .562 .500 .719 1.000 .120 .188
10SL 462-XXX .6250-24 NEF .391 .672 .297 .562 .625 .719 1.000 .120 .188
12S 463-XXX .7500-20 UNEF .450 .672 .297 .562 .625 .812 1.094 .120 .188
12 464-XXX .7500-20 UNEF .625 .860 .484 .750 .625 .812 1.094 .120 .188
14S 465-XXX .8750-20 UNEF .450 .672 .297 .562 .750 .906 1.188 .120 .188
14 466-XXX .8750-20 UNEF .625 .860 .484 .750 .750 .906 1.188 .120 .188
16S 467-XXX 1.0000-20 UNEF .450 .672 .297 .562 .875 .969 1.281 .120 .188
16 468-XXX 1.0000-20 UNEF .625 .860 .484 .750 .875 .969 1.281 .120 .188
18 469-XXX 1.1250-18 NEF .625 .891 .453 .750 1.000 1.062 1.375 .120 .188
20 470-XXX 1.2500-18 NEF .625 .891 .453 .750 1.125 1.156 1.500 .120 .188
22 471-XXX 1.3750-18 NEF .625 .891 .453 .750 1.250 1.250 1.625 .120 .188
24 472-XXX 1.5000-18 NEF .625 .953 .453 .812 1.375 1.375 1.750 .147 .188
28 473-XXX 1.7500-18 NS .625 .953 .453 .812 1.625 1.562 2.000 .147 .188
32 474-XXX 2.0000-18 NS .625 1.031 .438 .875 1.875 1.750 2.250 .173 .188
36 475-XXX 2.2500-16 UN .625 1.031 .438 .875 2.062 1.938 2.500 .173 .188
40 476-XXX 2.5000-16 UN .625 1.031 .438 .875 2.312 2.188 2.750 .173 .188
MIL-5015 Type Connectors
with PCB contacts
MS3102R box mounting receptacle
.030 .001 DIA.
FOR SIZE 16 CONTACTS
N
M
K
L
BA
THREAD Z
PCB TAIL STICKOUT
SR
R
S
T
4 HOLES
HOW TO ORDER
• Order by ap plic able 10- part number in table below.
10- prefix designates oliv e drab cadmium plated connector shell.
(For availab ility of other finishes consult Amphenol, Sidney, NY)
• Add inse rt arrangement to end of number. Refer to insert availability chart on page 4 and pin-out
illustrations on pages 5-24. Last letter of part number designates rotation; P for pins in normal
position, S fo r so ck e ts in normal posit i on . See page 26 for alte r n ate rot at i on letter to use .
Example pa rt number: 10-6 02462-3P designates shell size 10SL with a 10S L-3 insert
and pin cont acts in normal position.
• Z dimension is determined by contact type in the insert arrangement.
• Most common options are sh own; other options are available.
Reverse Bayonet GT Series connectors
that incorporate 5015 inserts can also be
supplied with printed circuit board contacts.
Consult Amphenol for more information.
