SBC6000X Single Board Computer
ARM926EJ-S Single-board Computer based upon Atmel AT91SAM9261S
USB Host/Device, Ethernet, Serial Ports, LCD, SD, Audio, Keyboard…
Extended Precise RTC, RS485 with Isolation
Supports Linux 2.6 OS and WinCE6.0 OS
Embest SBC6000X Single Board Computer
Description
Embest SBC6000X is an embedded single board computer using Atmel’s
AT91SAM9261S microprocessor with low power and high reliability. The board is a com pact
board with various peripheral interfaces including USB Host/Device, Ethernet, LCD/Touch
Screen, Serial ports, Keyboard, Audio, SPI, SD and BUS. It’s peripheral interfaces features ESD
protection. The board is capable of supporting both Windows CE 6.0 and Linux 2.6.24 OS and
Embest provides BSP package, user manual and some other tools and documents to help customer
better understand this board. User can use Microsoft EVC or provided linux tool chain for
development to speed your time to market.
The SBC6000X has various industrial Bus interfaces which can work stably in -10~70
temperature or in any rigorous environment, specially some fields needs high requirements for
communication, such as industrial field control, intelligent instrument, industrial control terminal
and car electronics.
.
Hardware Features
The Atmel AT91SAM9261S processor is an ARM926EJ-S based high-performance 32-bit
RISC Microcontroller with 16K byte instruction and 16K byte data cache memories; it is
pin-to-pin compatible with the AT91SAM9261. It has additional 32K Bytes ROM, 16K Bytes
SRAM embedded memories and can operate at 210 MIPS with a 190 MHz clock. Its extensive
peripheral set includes USB 2.0, External Bus Interface, LCD Controller, Bus Matrix, System
Controller, Reset Controller, Shutdown Controller, Clock Generator, Power Management
Controller, Advanced Interrupt Controller, Debug Unit, Periodic Interval Timer, Watchdog Timer,
Real-Time Timer, Three 32-bit PIO Controllers, Nineteen Peripheral DMA Channels (PDC),
Multimedia Card Interface (MCI), Three Synchronous Serial Controllers (SSC), Three Universal
Synchronous/Asynchronous Receiver Transmitters (USART), Two Master/Slave Serial Peripheral
Interface (SPI), One Three-channel 16-bit Timer/Counters (TC), Two-wire Interface (TWI), IEEE
1149.1 JTAG Boundary Scan.
The SBC6000X board is integrated with AT91SAM9261S microcontroller, Nand Flash,
EEPROM and SDRAM and various other peripheral interfaces. This board is characterized as
follows:
Dimensions: 106.4mm x 96mm
Working temperature: -10~70 Celsius
Power supply: +12V
Power output interface: +5V and Vin (±5%)
Atmel AT91SAM9261S (ARM926EJ-S core with MMU capable of 200MHz operation)
64Mbyte SDRAM (2*16-bit, support up to 128Mbyte)
128Mbyte Nand Flash (support up to 256Mbyte)
2Kbit EEPROM
4/8Mbyte DataFlash (bootable, Reserved for soldering)
1 2*20-pin LCD interface
Touch panel (4-channel 12-bit ADC)
1 SPI interface
1 10M/100M Ethernet interface (RJ45)
3 serial ports (COM0: 3-wire Debug serial port, COM1: 5-wire RS232/TTL serial port,
COM2: 5-wire RS232/TTL/RS485 serial port)
2 USB host and 1 USB device
4 x 4 keyboard interface
Audio Input/Output Jacks
RTC (battery backed)
SD card socket
LED (CPU working station indicator)
3 Buttons (two for user defined, one for Reset)
1 Power switch
16 GPIOs (10 from CPU, 6 from extension)
BUS interface (with buffer)
Onboard Interfaces and Connectors
Function Diagram
Dimension
Software
OS Item Features Description
Version u-boot 1.3.4
Boot up mode Support booting from NandFlash or SD card
Download mode Support downloading kernel and file system from
Ethernet
Updating kernel Support programming kernel image into NandFlash
Startup code
Updating file system Support programming Yaffs2 file system into
NandFlash
Version Linux 2.6.24
File system ROM/CRAM/EXT2/RAMDISK/YAFFS2/FAT32
Serial Three serial ports drivers, two 5-wire serial ports
have hardware stream control
RTC Hardware clock driver, save and restore system
clock
Ethernet 10/100M Ethernet (DM9000) driver
LCD LCDs driver
Touch screen Touch screen driver
Audio Audio output driver
MMC/SD MMC mode driver
USB host USB host driver, can support USB device hot plug
USB device USB device driver
Keypad 4*4 keyboard driver
EEPROM Provide EEPROM read and write driver
GPIO Provide driver
Kernel and
Drivers
Buzzer Provide driver
File system Format yaffs2 file system, can be read and written
Network
protocol and
applications TCP/IP Complete TCP/IP protocol
Network Ping Ping command, used in checking system
Ifconfig, route, inetd Used in network configuration and relative service
program
Login, sh, echo,
discard Login and other program
System
configuration
and service
Webserver Use apache-1.3.41
Basic
command
Cat, chmod, discard,
echo, flashwrite,
flashfsd, free,
genhtml, init, kill,
loader, Ls, mkdir,
mount, ps, reboot,
rm, smanaged,
sysconf, yes, insmod,
lsmod, rmmod
Linux command
Linux
Graphics
library GTK2.0+graphics
Development library Has already transplanted into system
Item Features Description
Version eboot (WinCE 6.0)
Boot up mode Support booting up from NandFlash or SD card
Startup code Download
mode Support downloading NK from Ethernet, SAM-BA
Version WinCE 6.0
Serial Three serial ports driver, one 3-wire and two 5-wire
RTC Hardware clock driver, save and restore clock
Ethernet 10/100M Ethernet (DM9000A) driver
LCD/TSP LCD and Touch screen driver
Keyboard 4*4 keyboard driver
Audio Audio output driver
MMC/SD Include PDC and SDIO two modes driver
USB host USB host driver
(Support USB mouse and USB keyboard)
USB device USB device driver
WinCE
Kernel
GPIO GPIO driver
Order Information
Order No. T6010073
Item Embest SBC6000X Single Board Computer (Standard Configuration)
Configuration
z SBC6000X board
z 1 serial cable
z 1 net cable
z 1 USB cable
z 12V power adapter
z 1 CD with product reference
Options. 3.5”/4.3”/5.6”/7”LCD
Embest Info&Tech Co., LTD.
Room 509, Luohu Science&Technology Building,
#85 Taining Rd., Shenzhen, Guangdong, China 518020
Tel: +86-755-25635656/25636285
Fax: +86-755-25616057
Email: market@embedinfo.com
http://www.embedinfo.com/english
http://www.armkits.com