© Semiconductor Components Industries, LLC, 2011
October, 2011 − Rev. 12
1Publication Order Number:
2N6338/D
2N6338, 2N6341
High-Power NPN Silicon
Transistors
. . . designed for use in industrial−military power amplifier and
switching circuit applications.
•High Collector−Emitter Sustaining Voltage −
VCEO(sus) = 100 Vdc (Min) − 2N6338
= 150 Vdc (Min) − 2N6341
•High DC Current Gain −
hFE = 30 − 120 @ IC = 10 Adc
= 12 (Min) @ IC = 25 Adc
•Low Collector−Emitter Saturation Voltage −
VCE(sat) = 1.0 Vdc (Max) @ IC = 10 Adc
•Fast Switching Times @ IC = 10 Adc
tr = 0.3 ms (Max)
ts = 1.0 ms (Max)
tf = 0.25 ms (Max)
•Pb−Free Packages are Available
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
*MAXIMUM RATINGS
ÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎ
Rating
ÎÎÎÎ
ÎÎÎÎ
Symbol
ÎÎÎ
ÎÎÎ
2N6338
ÎÎÎÎ
ÎÎÎÎ
2N6341
ÎÎÎ
ÎÎÎ
Unit
ÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎ
Collector−Base Voltage
ÎÎÎÎ
ÎÎÎÎ
VCB
ÎÎÎ
ÎÎÎ
120
ÎÎÎÎ
ÎÎÎÎ
180
ÎÎÎ
ÎÎÎ
Vdc
ÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎ
Collector−Emitter Voltage
ÎÎÎÎ
ÎÎÎÎ
VCEO
ÎÎÎ
ÎÎÎ
100
ÎÎÎÎ
ÎÎÎÎ
150
ÎÎÎ
ÎÎÎ
Vdc
ÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎ
Emitter−Base Voltage
ÎÎÎÎ
ÎÎÎÎ
VEB
ÎÎÎÎÎÎ
ÎÎÎÎÎÎ
6.0
ÎÎÎ
ÎÎÎ
Vdc
ÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎ
Collector Current
Continuous
Peak
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
IC
ÎÎÎÎÎÎ
ÎÎÎÎÎÎ
ÎÎÎÎÎÎ
25
50
ÎÎÎ
ÎÎÎ
ÎÎÎ
Adc
ÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎ
Base Current
ÎÎÎÎ
ÎÎÎÎ
IB
ÎÎÎÎÎÎ
ÎÎÎÎÎÎ
10
ÎÎÎ
ÎÎÎ
Adc
ÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎ
Total Device Dissipation
@ TC = 25_C
Derate above 25_C
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
PD
ÎÎÎÎÎÎ
ÎÎÎÎÎÎ
ÎÎÎÎÎÎ
200
1.14
ÎÎÎ
ÎÎÎ
ÎÎÎ
W
W/°C
ÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎ
Operating and Storage
Junction
Temperature Range
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
TJ, Tstg
ÎÎÎÎÎÎ
ÎÎÎÎÎÎ
ÎÎÎÎÎÎ
–65 to +200
ÎÎÎ
ÎÎÎ
ÎÎÎ
_C
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
THERMAL CHARACTERISTICS
ÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎ
Characteristic
ÎÎÎÎ
ÎÎÎÎ
Symbol
ÎÎÎ
ÎÎÎ
Max
ÎÎÎ
ÎÎÎ
Unit
ÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎ
Thermal Resistance, Junction to Case
ÎÎÎÎ
ÎÎÎÎ
θJC
ÎÎÎ
ÎÎÎ
0.875
ÎÎÎ
ÎÎÎ
_C/W
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
*Indicates JEDEC Registered Data.
Device Package Shipping
ORDERING INFORMATION
2N6338 TO−204AA 100 Units / Tray
2N6338G TO−204AA
(Pb−Free)
TO−204AA
CASE 1−07
100 Units / Tray
25 AMPERE
POWER TRANSISTORS
NPN SILICON
http://onsemi.com
2N6341 TO−204AA 100 Units / Tray
2N6341G TO−204AA
(Pb−Free)
100 Units / Tray
2N6338, 2N6341
http://onsemi.com
2
200
75
50
25
00 25 50 75 100 125 150 175 200
Figure 1. Power Derating
TC, CASE TEMPERATURE (°C)
PD, POWER DISSIPATION (WATTS)
175
150
125
100
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
*ELECTRICAL CHARACTERISTICS (TC = 25_C unless otherwise noted)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Characteristic
ÎÎÎÎÎ
ÎÎÎÎÎ
Symbol
ÎÎÎ
ÎÎÎ
Min
ÎÎÎÎ
ÎÎÎÎ
Max
ÎÎÎ
ÎÎÎ
Unit
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
OFF CHARACTERISTICS
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Collector−Emitter Sustaining Voltage (1) 2N6338
(IC = 50 mAdc, IB = 0) 2N6341
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
VCEO(sus)
ÎÎÎ
ÎÎÎ
ÎÎÎ
100
150
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
−
−
ÎÎÎ
ÎÎÎ
ÎÎÎ
Vdc
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Collector Cutoff Current
(VCE = 50 Vdc, IB = 0) 2N6338
(VCE = 75 Vdc, IB = 0) 2N6341
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
ICEO
ÎÎÎ
ÎÎÎ
ÎÎÎ
−
−
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
50
50
ÎÎÎ
ÎÎÎ
ÎÎÎ
μAdc
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Collector Cutoff Current
(VCE = Rated VCEO, VEB(off) = 1.5 Vdc)
(VCE = Rated VCEO, VEB(off) = 1.5 Vdc, TC = 150_C)
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
ICEX
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
−
−
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
10
1.0
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
μAdc
mAdc
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Collector Cutoff Current (VCB = Rated VCB, IE = 0)
ÎÎÎÎÎ
ÎÎÎÎÎ
ICBO
ÎÎÎ
ÎÎÎ
−
ÎÎÎÎ
ÎÎÎÎ
10
ÎÎÎ
ÎÎÎ
μAdc
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Emitter Cutoff Current (VBE = 6.0 Vdc, IC = 0)
ÎÎÎÎÎ
ÎÎÎÎÎ
IEBO
ÎÎÎ
ÎÎÎ
−
ÎÎÎÎ
ÎÎÎÎ
100
ÎÎÎ
ÎÎÎ
μAdc
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ON CHARACTERISTICS (1)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
DC Current Gain)
(IC = 0.5 Adc, VCE = 2.0 Vdc)
(IC = 10 Adc, VCE = 2.0 Vdc)
(IC = 25 Adc, VCE = 2.0 Vdc)
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
hFE
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
50
30
12
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
−
120
−
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
−
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Collector Emitter Saturation Voltage
(IC = 10 Adc, IB = 1.0 Adc)
(IC = 25 Adc, IB = 2.5 Adc)
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
VCE(sat)
ÎÎÎ
ÎÎÎ
ÎÎÎ
−
−
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
1.0
1.8
ÎÎÎ
ÎÎÎ
ÎÎÎ
Vdc
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Base−Emitter Saturation Voltage
(IC = 10 Adc, IB = 1.0 Adc)
(IC = 25 Adc, IB = 2.5 Adc)
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
VBE(sat)
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
−
−
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
1.8
2.5
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
Vdc
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Base−Emitter On Voltage (IC = 10 Adc, VCE = 2.0 Vdc)
ÎÎÎÎÎ
ÎÎÎÎÎ
VBE(on)
ÎÎÎ
ÎÎÎ
−
ÎÎÎÎ
ÎÎÎÎ
1.8
ÎÎÎ
ÎÎÎ
Vdc
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
DYNAMIC CHARACTERISTICS
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Current−Gain − Bandwidth Product (2) (IC = 1.0 Adc, VCE = 10 Vdc, ftest = 10 MHz)
ÎÎÎÎÎ
ÎÎÎÎÎ
fT
ÎÎÎ
ÎÎÎ
40
ÎÎÎÎ
ÎÎÎÎ
−
ÎÎÎ
ÎÎÎ
MHz
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Output Capacitance (VCB = 10 Vdc, IE = 0, f = 0.1 MHz)
ÎÎÎÎÎ
ÎÎÎÎÎ
Cob
ÎÎÎ
ÎÎÎ
−
ÎÎÎÎ
ÎÎÎÎ
300
ÎÎÎ
ÎÎÎ
pF
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
SWITCHING CHARACTERISTICS
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Rise Time (VCC ≈ 80 Vdc, IC = 10Adc, IB1 = 1.0 Adc, VBE(off) = 6.0 Vdc)
ÎÎÎÎÎ
ÎÎÎÎÎ
tr
ÎÎÎ
ÎÎÎ
−
ÎÎÎÎ
ÎÎÎÎ
0.3
ÎÎÎ
ÎÎÎ
μs
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Storage Time (VCC ≈ 80 Vdc, IC = 10 Adc, IB1 = IB2 = 1.0 Adc)
ÎÎÎÎÎ
ÎÎÎÎÎ
ts
ÎÎÎ
ÎÎÎ
−
ÎÎÎÎ
ÎÎÎÎ
1.0
ÎÎÎ
ÎÎÎ
μs
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Fall Time (VCC ≈ 80 Vdc, IC = 10 Adc, IB1 = IB2 = 1.0 Adc)
ÎÎÎÎÎ
ÎÎÎÎÎ
tf
ÎÎÎ
ÎÎÎ
−
ÎÎÎÎ
ÎÎÎÎ
0.25
ÎÎÎ
ÎÎÎ
μs
*Indicates JEDEC Registered Data.
(1) Pulse Test: Pulse Width v 300 μs, Duty Cycle v 2.0%.
(2) fT = |hfe| • ftest.
2N6338, 2N6341
http://onsemi.com
3
Figure 2. Switching Time Test Circuit
1000
0.3
Figure 3. Turn−On Time
IC, COLLECTOR CURRENT (AMP)
t, TIME (ns)
500
100
70
50
10 0.5 0.7 2.0 3.0 7.0 30
+ 11 V
0
VCC
SCOPE
RB
10 OHMS
- 5.0 V
tr, tf v 10 ns
DUTY CYCLE = 1.0%
RC
8.0 OHMS
20
30
5.0 20
10 μs
- 9.0 V
700
200
300
1.0 10
NOTE: For information on Figures 3 and 6, RB and RC were
varied to obtain desired test conditions.
+ 80 V
1N4933
td @ VBE(off) = 6.0 V
VCC = 80 V
IC/IB = 10
TJ = 25°C
tr
Figure 4. Thermal Response
t, TIME (ms)
1.0
0.01
0.01
0.7
0.5
0.3
0.2
0.1
0.07
0.05
0.03
0.02
0.02 0.03
r(t), EFFECTIVE TRANSIENT
THERMAL RESISTANCE (NORMALIZED)
0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 1000500
θJC = r(t) θJC
θJC = 0.875°C/W MAX
D CURVES APPLY FOR POWER
PULSE TRAIN SHOWN
READ TIME AT t1
TJ(pk) - TC = P(pk) θJC(t)
P(pk)
t1
t2
DUTY CYCLE, D = t1/t2
D = 0.5
SINGLE PULSE
0.2
0.05
0.1
0.02
0.01
0.3 3.0 30 300
100
2.0
Figure 5. Active Region Safe Operating Area
50
5.0
0.01 10 20 70 200
TJ = 200°C
2N6338
2N6341
0.1
10
0.5
IC
, COLLECTOR CURRENT (AMP)
VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS)
20
0.2
50 100
200 μs
5.0 ms
1.0 ms
dc
2.0
0.02
0.05
1.0
3.0 5.0 307.0
BONDING WIRE LIMITED
THERMALLY LIMITED @
TC = 25°C (SINGLE PULSE)
SECOND BREAKDOWN
LIMITED CURVES APPLY
BELOW RATED VCEO
There are two limitations on the power handling ability of
a transistor: average junction temperature and second
breakdown. Safe operating area curves indicate IC−VCE
limits of the transistor that must be observed for reliable
operation; i.e., the transistor must not be subjected to greater
dissipation than the curves indicate.
The data of Figure 5 is based on TJ(pk) = 200_C; TC is
variable depending on conditions. Second breakdown pulse
limits are valid for duty cycles to 10% provided TJ(pk)
v 200_C. TJ(pk) may be calculated from the data in
Figure 4. At high case temperatures, thermal limitations will
reduce the power that can be handled to values less than the
limitations imposed by second breakdown.
2N6338, 2N6341
http://onsemi.com
4
5.0
0.3
Figure 6. Turn−Off Time
IC, COLLECTOR CURRENT (AMP)
t, TIME (s)μ
2.0
1.0
0.5
0.3
0.2
0.1
0.07
0.05 0.5 0.7 1.0 2.0 5.0 10 20 30
VCC = 80 V
IB1 = IB2
IC/IB = 10
TJ = 25°C
ts
3.0
0.7
3.0
tf
5000
0.1
Figure 7. Capacitance
VR, REVERSE VOLTAGE (VOLTS)
50 0.5 1.0 2.0 5.0 20 50 10010
C, CAPACITANCE (pF)
700
500
200
100
TJ = 25°C
Cib
Cob
3000
2000
1000
70
300
0.2
2N6338, 2N6341
http://onsemi.com
5
PACKAGE DIMENSIONS
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. ALL RULES AND NOTES ASSOCIATED WITH
REFERENCED TO-204AA OUTLINE SHALL APPLY.
STYLE 1:
PIN 1. BASE
2. EMITTER
CASE: COLLECTOR
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A1.550 REF 39.37 REF
B--- 1.050 --- 26.67
C0.250 0.335 6.35 8.51
D0.038 0.043 0.97 1.09
E0.055 0.070 1.40 1.77
G0.430 BSC 10.92 BSC
H0.215 BSC 5.46 BSC
K0.440 0.480 11.18 12.19
L0.665 BSC 16.89 BSC
N--- 0.830 --- 21.08
Q0.151 0.165 3.84 4.19
U1.187 BSC 30.15 BSC
V0.131 0.188 3.33 4.77
A
N
E
C
K
−T−SEATING
PLANE
2 PLD
M
Q
M
0.13 (0.005) Y M
T
M
Y
M
0.13 (0.005) T
−Q−
−Y−
2
1
U
L
GB
V
H
TO−204AA (TO−3
CASE 1−07
ISSUE Z
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
2N6338/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
