GLASS PASSIVATION 1005 Thick Film Chip Resistor Standard Grade, Wraparound WRAPAROUND TERMINATIONS RESISTOR FILM 96% ALUMINA CHIP PERFORMANCE CHARACTERISTICS 1W-40MW 0.5%,1%, 2%, 5%,10% 100, 200, 300 ppm 81.5C/W 250 mW 75 Volts (1)+/- 0.5% limited availability ENVIRONMENTAL PERFORMANCE (2) 0.03% 0.03% 0.03% 0.03% 0.05% 0.05% See Chart Thermal Shock Low Temperature Operation Short-time Overload Resistance to Bonding Exposure Moisture Resistance High Temperature Exposure Life Test POWER DISSIPATION CURRENT NOISE fiber epoxy board TEMPERATURE RISE (C) Resistance Range Tolerances (1) TCR Thermal Resistance Maximum Power Maximum Voltage ceramic board POWER DISSIPATION (WATTS) POWER DERATING LIFE TEST (2)Typical resistance change, test methods and criteria per MIL-PRF-55342. PART NUMBERING S 1005 C P X 150 J 20 - TR PACKAGING CODE: - TR = Tape/Reel - W = Waffle Carrier (Default packaging is Bulk) TEMPERATURE CHARACTERISTIC: 10: 100 ppm 20: 200 ppm 30: 300 ppm TOLERANCE: F: 1% G: 2% J: 5% K: 10% M: 20% RESISTANCE VALUE: Four digits are used for tolerances of 1% or lower, three digits are used above 1%. Leading digits are significant while the last digit specifies the number of zeros to add. The letter "R" is used to represent the decimal for fractional ohmic values. Example: 5R6 is 5.6 ohms. TERMINATION FINISH: X: Sn60 over Nickel (Solderable) C: Silver bearing (Epoxy bondable-RoHS) G: Gold (Epoxy bondable-RoHS) Y: Silver over Nickel (Solderable -RoHS) Z: Gold over Nickel (Solderable-RoHS) PRODUCT DESIGNATION: P: Thick film on alumina U: Untrimmed alumina (10% & 20% tolerance only) TERMINATION TYPE: C: Wraparound termination SIZE CODE GRADE: S: Standard Production H: High Reliability (For Screening options, contact the factory) MECHANICAL INCHES Length Width Thickness Top Term Bottom Term Gap Approx. Weight .100 (.098 - .108) .048 (.046 - .054) .018 (.015 - .023) .014 (.010 - .020) .014 (.010 - .020) .072 (.068 - .076) .0054 grams MILIMETERS 2.54 1.22 0.46 0.36 0.36 1.83 .130 MINIMUM RECOMMENDED MOUNTING PADS (INCHES) (2.49 - 2.74) (1.17 - 1.37) (0.38 - 0.58) (0.25 - 0.51) (0.25 - 0.51) (1.73 - 1.93) .052 .066 .032 "Specifications subject to change without notice." STATE OF THE ART, INC. 2470 Fox Hill Road, State College, PA 16803-1797 Phone (814) 355-8004 Fax (814) 355-2714 Toll Free 1-800-458-3401 www.resistor.com 02/08/08