100 x .100 Latch/Ejector Header 4 Wall, Straight & Right Angle, High Temp Option IMPORTANT NOTICE TO PURCHASER ALL STATEMENTS, TECHNICAL INFORMATION AND RECOMMENDATIONS CONTAINED HEREIN ARE BASED ON TESTS WE BELIEVE TO BE RELIABLE, BUT THE ACCURACY OR COMPLETENESS THEREOF IS NOT GUARANTEED, AND THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES, EXPRESSED OR IM- PLIED: SELLERS AND MANUFACTURERS ONLY OBLIGATION SHALL BE TO REPLACE SUCH QUANTITY OF THE PRODUCT PROVED TO BE DEFECTIVE. NEITHER SELLER NOR MANUFACTURER SHALL BE LIABLE FOR ANY INJURY, LOSS OR DAMAGE, DIRECT OR CONSEQUENTIAL, ARISING OUT OF THE USE OF OR THE INABILITY TO USE THE PRODUCT. BEFORE USING, USER SHALL DETERMINE THE SUITABILITY OF THE PRODUCT FOR HIS INTENDED USE, AND USER AS- SUMES ALL RISK AND LIABILITY WHATSOEVER IN CONNECTION THEREWITH. NO STATEMENT OR RECOMMENDATION NOT CONTAINED HEREIN SHALL HAVE ANY FORCE OR EFFECT UNLESS IN AN AGREEMENT SIGNED BY OF- FICERS OR SELLER AND MANUFACTURER. TS-0772-01 Date Issued: October 7, 1997 Sheet 1 of 4 84 Physical Insulation Material: Glass Filled Polyester (PBT) Glass Filled Polyester (PCT High Temp Option) Flammability: UL 94V-0 Color: Gray, Standard Beige (High Temp Option) Marking: 3M Logo, Part Identification Number and Orientation Triangle Contact Material: Copper Alloy Plating Underplate: 100 w [ 2.54 um ] Nickel QQ-N-290, Class 2 Wiping Area: Gold MIL-G-45204, Type II, Grade C Solder Tails: 200 w [ 5.08 um ] 60/40 Tin Lead MIL-P-81728 Wrap Tails: Gold Flash, Standard Electrical Current Rating: 1A Insulation Resistance: >1 x 10 Q at 500 Vdc Withstanding Voltage: 1000 Vrms at Sea Level Environmental Temperature Rating: 55C to +105C High Temp Process Rating: UL File No.: E68080 Maximum 235C, with 90 seconds over 215C 3M Electronic Products Division 6801 River Place Blvd. Austin, TX 78726-9000 For technical, sales or ordering information call 800-225-5373.100 .100 Latch/Ejector Header 4 Wall, Straight & Right Angle, High Temp Option -XOXX -X2XX -X3XX -X4XX Header with No -X5XX -X6XX Header with Ejector/Latch Header with Header with Ejector only Short Ejector/Latch Long Ejector/Latch for 3M Sockets without for 3M Sockets with CAL Strain Relief Strain Relief .0] a 424+ 010 oN / [10.77 [9.4] Note: This Ejector is a Nickel Plated Zinc Alloy Casting. =||= .025 + .002 Sq Typ 2X v.100 [0.64 ] [2.54] (See Note 2) mT r .24 | D | 28 J .020 i [6.1] [0.51] [7.1] HN) Wf Sp b H a yo \ ok \| LI | t LH Cy #odao oo od 25 4 .30 C) . [7.6] 1@) | H+ + Oo Oo oO Oo oO oo 1 [6.4] I | || 4 i _ [a= | VEE i i 100 Ref 34. | > [2.54] -t Dee [8.3] i E+,.010 12 | [3.0] Position 1 Y B ~ | Notch A |}= -F Typ Position 4 (See Table 1 & Note1) : _ Orientation Notch B Section ACA Triangle (See Table 1) (Straight) | Notch C 025 002 Sq Typ yt (See Table 1 & Note 1) [0.64] 5.3] rr B | \ | 24 | [6.1] 68 | 17.3 _. | [17.3] i _ H [3.0] 35 TT Tat") coo _| | | | | ee E+.010 [0.51] Yue ye YY 497 [5.00] .049 Ref / = A o___ 8 20 [1.24] 2X 7 .100 __ [5.1] .100 Ref [2.54] [2.54] (See Note 2) A Section B-B (Right Angle) TS-0772-01 Sheet 2 of 4 3M Electronic Products Division 6801 River Place Blvd. For technical, sales or ordering information call Austin, TX 78726-9000 800-225-5373.100 .100 Latch/Ejector Header 4 Wall, Straight & Right Angle, High Temp Option Notes: Recommended Mounting Hole Pattern (Straight) 1. Notches A & C will accomodate 3M Polarizing Keys (3M Part #N3518). . Accepts Rear and Front mounting hardware: Rear Entry: #4-24 thread cutting screw, 3M Part #3341-5, .116 [2.95] dia mounting hole Front Entry: (Prior to installation of latch on Straight Versions) #2-56 bolt and nut, 3M Part #3341-6, -106 [2.69] dia mounting hole . The recommended PCB hole size for the kinked tail positions on the .112 solder tail connector is .035 + .002. Table 1 Pin 3M Part Dimensions Polarization Quantity Number A B Cc D Notches Provided 10 3793 1,26 [32.1] 1,105 [28.07] 865 [21.97] .71 [18.0] BC 14 3314 1,46 [37,2] 1,305 [33.15] 1,065 [27.05] 91 [23.1] BC 16 3408 1,56 [39,7] 1,405 [35.69] 1,165 [29,59] 1.01 [25.6] ABC 20 3428 1,76 [44.8] 1.605 [40.77] 1,365 [34.67] 1.21 [30.7] ABC 24 3627 1,96 [49,8] 1,805 [45.85] 1,565 [39.75] 1.41 [35.8] ABC 26 3429 2,06 [52.4] 1,905 [48.39] 1,665 [42.29] 1.51 [38.3] ABC 30 3440 2,26 [57.4] 2.105 [53.47] 1.865 [47.37] 1.71 43.43] ABC 34 3431 2,46 [62.6] 2.305 [58.55] 2,065 [52,45] 1.91 [48.5] ABC 40 3432 2.76 [70.2] 2.605 [66.17] 2,365 [60.07] 2.21 [56.1] ABC 50 3433 3,26 [82.9] 3,105 [78.87] 2,865 [72.77] 2.71 [68.8] ABC 60 3372 3,76 [95.6] 3,605 [91.57] 3,365 [85.47] 3,21 [81.5] ABC 64 3764 3,96 [100.7] 3,805 [96.65] 3,565 [90,55] 3,41 [86.6] ABC Table 2 Pin Cross Section 3M Part : : . . . Number Suffix Contact Tail Dimension E Dimension F Diagonals Corner Radii Dimension G Solder Tail for -5XX2 062 [1.57] 112 0,0245 + ,0005 0,028 + ,001 0,0075 Ref 035 + 003 -6XX2 Thick PC Board [2.84] [0.622] [0.71] [0.191] [0.89] (See Note 3) Solder Tail for -5X03 .094 [2.39] to 155 0,0245 + ,0005 0,028 + ,001 0,0075 Ref 035 + ,003 -6X03 125 [3.18] [3.94] [0.622] [0.71] [0.191] [0.89] Thick PC Board -5X05 Wire Wrap Tail for up to 61 Ref 0,0250 + .002 0,035 + ,003 0,003 Max 045 + ,003 -6X05 3 Levels of Wire Wrap [15.5] [0.635] [0.90] [0.08] [1.14] S106 or 7.116 S106 or 7.116 [2.69] [2.95] a [2.69] [2.95] 499 (See Note 2) [10.4] (See Note 2) [7.62] Max to Edge of PCB G Dia Side to Side Stackability Dig _ for Daisy Chain e-6-3 | - - | | ny? { ne) - \o = wy g 4 ans oe t q OI oe - fo | Tl Position 1 029 Postion" 82 [0.74] | 100 +.008 _ | 100 + .003 <= [2.54] | [2.54] | | | -100 + .003 | 232 352 [2.54] [5.89] [8.94] -100+ .003 [2.54] B a c i Recommended Mounting Hole Pattern (Right Angle) Inch [mm] Tolerance Unless Noted 0 .00 | .000 Inch | .1 | 4.01 | 4.005 [ ] Dimensions for Reference only TS-0772-01 Sheet 3 of 4 3M Electronic Products Division 6801 River Place Blvd. Austin, TX 78726-9000 For technical, sales or ordering information call 800-225-5373.100 .100 Latch/Ejector Header 4 Wall, Straight & Right Angle, High Temp Option Ordering Information 30 Microinches Gold Plated Product XXXXX-XXXX Product Material: _________] N = High Temp Blank = Standard Tail 02 =Solder Tail for .062 [1.57] Thick Board K2=Kinked Solder Tails for .062 [1.57] 3M Part Number Thick Board (See Table 1) 03 =Solder Tails for .094 to .125 [2.39 to 3.18] Thick Board : . . . 05 = Wrap Posts for up to 3 levels of Wire Wrap Shroud and Pin Configuration Latch/Ejector System i i i 5 = 4 Wall, Right Angle O= No. Latch/ Elector (Not available on High Temp version.) 6 = 4 Wall, Straight 2 = Short, Roll Pin Latch/Ejectors (3M Part #3505-2)" 3 = Long, Roll Pin Latch/Ejectors (3M Part #3505-3)* 4 = Roll Pin Ejectors (3M Part # 3505-4)* 5 = Short, Snap-In Latch/Ejectors, (3M Part # 3505-30) 6 = Long, Snap-In Latch/Ejectors (3M Part # 3505-31) 15 Microinches Gold Plated Product XXXXX-XXXXUG Product Material: | Po Plating Suffix N = High Temp UG = 15 microinch Gold Blank = Standard 3M Part Number (See Table 1) Tail 02 =Solder Tail for .062 [1.57] Thick Board K2=Kinked Solder Tails for .062 [1.57] Shroud and Pin Configuration Thick Board 5 = 4 Wall, Right Angle 03 =Solder Tails for .094 to .125 [2.39 to 3.18] 6 = 4 Wall, Straight Thick Board Latch/Ejector System 0 = No Latch/Ejector 5 = Short, Snap In Latch/Ejectors (3M Part #3505-30) 6 = Long, Snap In Latch/Ejectors (3M Part #3505-31) TS-0772-01 * Roll pin Latch/Ejector available only on standard version. Sheet 4 of 4 3M Electronic Products Division 6801 River Place Blvd. For technical, sales or ordering information call Austin, TX 78726-9000 800-225-5373