GaAs INTEGRATED CIRCUIT PG2158T5K ED L, S-BAND SPDT SWITCH DESCRIPTION IN U The PG2158T5K is a GaAs MMIC for L, S-band SPDT (Single Pole Double Throw) switch which was developed for mobile phone and another L, S-band application. This device can operate 2 control switching by control voltage 1.8 to 5.3 V. This device can operate frequency from 0.05 to 3.0 GHz, having the low insertion loss and high isolation. This device is housed in a 6-pin plastic TSSON (Thin Shrink Small Out-line Non-leaded) package. And this package is able to high-density surface mounting. FEATURES * * * * : Vcont (H) = 1.8 to 5.3 V (2.7 V TYP.) : Vcont (L) = -0.2 to +0.2 V (0 V TYP.) Low insertion loss : LINS1 = 0.40 dB TYP. @ f = 0.05 to 1.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V : LINS2 = 0.45 dB TYP. @ f = 1.0 to 2.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V : LINS3 = 0.47 dB TYP. @ f = 2.0 to 2.5 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V : LINS4 = 0.53 dB TYP. @ f = 2.5 to 3.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V High isolation : ISL1 = 27 dB TYP. @ f = 0.05 to 1.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V : ISL2 = 19 dB TYP. @ f = 1.0 to 2.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V : ISL3 = 17 dB TYP. @ f = 2.0 to 2.5 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V : ISL4 = 17 dB TYP. @ f = 2.5 to 3.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V Handling power : Pin (0.1 dB) = +29.0 dBm TYP. @ f = 2.0/2.5 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V : Pin (1 dB) = +30.5 dBm TYP. @ f = 2.0/2.5 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V High-density surface mounting : 6-pin plastic TSSON package (1.0 x 1.0 x 0.37 mm) APPLICATIONS O NT * Switch control voltage * L, S-band digital cellular or cordless telephone TM * W-LAN, WLL and Bluetooth etc. DI SC ORDERING INFORMATION Part Number PG2158T5K-E2 Order Number PG2158T5K-E2-A Package 6-pin plastic TSSON (Pb-Free) Note Marking G2 Supplying Form * Embossed tape 8 mm wide * Pin 1, 6 face the perforation side of the tape * Qty 5 kpcs/reel Note With regards to terminal solder (the solder contains lead) plated products (conventionally plated), contact your nearby sales office. Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: PG2158T5K-A Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge. Document No. PG10578EJ02V0DS (2nd edition) Date Published December 2005 CP(K) The mark shows major revised points. PG2158T5K PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM 1 G2 2 (Bottom View) (Top View) 6 1 6 6 5 2 5 5 4 3 4 3 1 Pin No. Pin Name 1 OUTPUT1 2 GND 3 OUTPUT2 4 Vcont2 5 INPUT 6 Vcont1 ED (Top View) 2 4 3 IN U TRUTH TABLE Vcont1 Vcont2 INPUT-OUTPUT1 INPUT-OUTPUT2 Low High OFF ON High Low ON OFF ABSOLUTE MAXIMUM RATINGS (TA = +25C, unless otherwise specified) Parameter Input Power Ratings Vcont +6.0 Unit Note V O NT Switch Control Voltage Symbol Pin +31 dBm Operating Ambient Temperature TA -45 to +85 C Storage Temperature Tstg -55 to +150 C Note Vcont1 - Vcont2 6.0 V RECOMMENDED OPERATING RANGE (TA = +25C, unless otherwise specified) Parameter MIN. TYP. MAX. Unit Vcont (H) 1.8 2.7 5.3 V -0.2 0 +0.2 V DI SC Switch Control Voltage (H) Symbol Switch Control Voltage (L) 2 Vcont (L) Data Sheet PG10578EJ02V0DS PG2158T5K ELECTRICAL CHARACTERISTICS 1 (TA = +25C, Vcont (H) = 2.7 V, Vcont (L) = 0 V, DC cut capacitors = 56 pF, unless otherwise specified) Symbol Test Conditions LINS1 f = 0.05 to 1.0 GHz Insertion Loss 2 LINS2 f = 1.0 to 2.0 GHz Insertion Loss 3 LINS3 f = 2.0 to 2.5 GHz Insertion Loss 4 LINS4 f = 2.5 to 3.0 GHz Isolation 1 ISL1 f = 0.05 to 1.0 GHz Isolation 2 ISL2 f = 1.0 to 2.0 GHz Isolation 3 ISL3 f = 2.0 to 2.5 GHz Isolation 4 ISL4 f = 2.5 to 3.0 GHz Note 1 Note 1 Pin (1 dB) - 0.45 0.50 - 0.47 0.55 - 0.53 0.60 23 27 - 16 19 - 14 17 - 14 17 - dB - dB +26.0 +29.0 - dBm f = 0.5 to 3.0 GHz - +29.0 - f = 0.5 to 3.0 GHz - +30.5 - dBm Note 1 Note 3 dB 20 f = 0.05 to 3.0 GHz Input Power 0.45 15 RLout 1 dB Loss Compression 0.40 dB Output Return Loss Pin (0.1 dB) - - f = 0.05 to 3.0 GHz Note 2 Unit 20 RLin Input Power MAX. 15 Input Return Loss Note 1 0.1 dB Loss Compression TYP. IN U Insertion Loss 1 MIN. ED Parameter f = 2.0/2.5 GHz 2f0 f = 2.0/2.5 GHz, Pin = +20 dBm 65 75 - dBc 3rd Harmonics 3f0 f = 2.0/2.5 GHz, Pin = +20 dBm 65 75 - dBc IIP3 f = 0.5 to 3.0 GHz - +60 - dBm O NT 2nd Harmonics Input 3rd Order Distortion Intercept Point 2 tone 5 MHz spacing Switch Control Current Icont No signal - 0.2 20 A Switch Control Speed tSW 50% CTL to 90/10% RF - 50 500 ns Notes 1. DC cut capacitors = 1 000 pF at f = 0.05 to 0.5 GHz 2. Pin (0.1 dB) is measured the input power level when the insertion loss increases more 0.1 dB than that of linear range. 3. Pin (1 dB) is measured the input power level when the insertion loss increases more 1 dB than that of linear DI SC range. Caution This device is used it is necessary to use DC cut capacitors. The value of DC cut capacitors should be chosen to accommodate the frequency of operation, bandwidth, switching speed and the condition with actual board of your system. The range of recommended DC cut capacitor value is less than 100 pF. Data Sheet PG10578EJ02V0DS 3 PG2158T5K ELECTRICAL CHARACTERISTICS 2 (TA = +25C, Vcont (H) = 1.8 V, Vcont (L) = 0 V, DC cut capacitors = 56 pF, unless otherwise specified) Symbol Test Conditions LINS1 f = 0.05 to 1.0 GHz Insertion Loss 2 LINS2 f = 1.0 to 2.0 GHz Insertion Loss 3 LINS3 f = 2.0 to 2.5 GHz Insertion Loss 4 LINS4 f = 2.5 to 3.0 GHz Isolation 1 ISL1 f = 0.05 to 1.0 GHz Isolation 2 ISL2 f = 1.0 to 2.0 GHz Isolation 3 ISL3 f = 2.0 to 2.5 GHz Isolation 4 ISL4 f = 2.5 to 3.0 GHz Note 1 Note 1 Pin (1 dB) - 0.46 0.52 - 0.48 0.57 - 0.54 0.62 23 27 - 16 19 - 14 17 - 14 17 - dB - dB +19.0 +22.0 - dBm f = 0.5 to 3.0 GHz - +22.0 - f = 0.5 to 3.0 GHz - +25.0 - dBm Note 1 Note 3 dB 20 f = 0.05 to 3.0 GHz Input Power 0.47 15 RLout 1 dB Loss Compression 0.40 dB Output Return Loss Pin (0.1 dB) - - f = 0.05 to 3.0 GHz Note 2 Unit 20 RLin Input Power MAX. 15 Input Return Loss Note 1 0.1 dB Loss Compression TYP. IN U Insertion Loss 1 MIN. ED Parameter f = 2.0/2.5 GHz Icont No signal - 0.2 20 A Switch Control Speed tSW 50% CTL to 90/10% RF - 50 500 ns O NT Switch Control Current Notes 1. DC cut capacitors = 1 000 pF at f = 0.05 to 0.5 GHz 2. Pin (0.1 dB) is measured the input power level when the insertion loss increases more 0.1 dB than that of linear range. 3. Pin (1 dB) is measured the input power level when the insertion loss increases more 1 dB than that of linear range. Caution This device is used it is necessary to use DC cut capacitors. The value of DC cut capacitors should be chosen to accommodate the frequency of operation, DI SC bandwidth, switching speed and the condition with actual board of your system. The range of recommended DC cut capacitor value is less than 100 pF. 4 Data Sheet PG10578EJ02V0DS PG2158T5K EVALUATION CIRCUIT Vcont1 INPUT Vcont2 1 000 pF ED 1 000 pF C0 1 OUTPUT1 Remark 4 2 GND 3 C0 O NT C0 5 IN U 6 OUTPUT2 C0 : 0.05 to 0.5 GHz 1 000 pF : 0.5 to 3.0 GHz 56 pF DI SC The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. Data Sheet PG10578EJ02V0DS 5 PG2158T5K ILLUSTRATION OF THE TEST CIRCUIT ASSEMBLED ON EVALUATION BOARD ED Vcont2 IN U INPUT G2 C 3 C 5 OUTPUT2 C1 C 2 C O NT 4 Vcont1 DI SC USING THE NEC EVALUATION BOARD Symbol C1, C2, C3 C4, C5 6 Values 56 pF 1 000 pF Data Sheet PG10578EJ02V0DS OUTPUT1 PG2158T5K TYPICAL CHARACTERISTICS (TA = +25C, Vcont (H) = 2.7 V, Vcont (L) = 0 V, DC cut capacitors = 56 pF, using test fixture, unless otherwise specified) INPUT-OUTPUT1 INSERTION LOSS vs. FREQUENCY 3: 1.0 4: 0.5 5: 1 -0.5 2 3 -1.0 4 5 1.1 1.7 2.3 2.9 3.5 50 1: 40 2: 1.0 0.5 0 -0.5 -1.0 -1.5 3: 4: 10 5: 0 -10 1 -30 1.0 GHz -23.924 dB 1.5 GHz -21.519 dB 2.0 GHz -19.691 dB 2.5 GHz -18.176 dB 3.0 GHz 5 4 3 2 -40 -27.327 dB Isolation ISL (dB) 20 -2.5 0.5 1.5 GHz 3: -0.446 dB 4: -0.468 dB 5: -0.511 dB 2.0 GHz 2.5 GHz 3.0 GHz 1 2 3 4 5 1.1 1.7 2.3 2.9 3.5 50 1: -27.239 dB 40 2: -23.849 dB 30 3: -21.47 dB 20 4: -19.834 dB 10 5: -18.109 dB O NT Isolation ISL (dB) 30 1.0 GHz 1.5 GHz 2.0 GHz 2.5 GHz 3.0 GHz 0 -10 -20 1 -30 5 4 3 2 -40 1.1 1.7 2.3 2.9 -50 0.5 3.5 1.1 2.9 2.3 1.7 3.5 Frequency f (GHz) INPUT-OUTPUT1 INPUT RETURN LOSS vs. FREQUENCY INPUT-OUTPUT2 INPUT RETURN LOSS vs. FREQUENCY DI SC Frequency f (GHz) 50 Input Return Loss RLin (dB) 1.5 1.0 GHz INPUT-OUTPUT2 ISOLATION vs. FREQUENCY INPUT-OUTPUT1 ISOLATION vs. FREQUENCY -50 0.5 -0.413 dB Frequency f (GHz) Frequency f (GHz) -20 -0.380 dB 2: -2.0 -2.0 -2.5 0.5 1: 2.0 IN U -1.5 2.5 ED 1.5 1.0 GHz -0.411 dB 1.5 GHz -0.442 dB 2.0 GHz -0.468 dB 2.5 GHz -0.513 dB 3.0 GHz Insertion Loss LINS (dB) 2: 0 -0.380 dB 1: 2.0 1: 40 2: 30 3: 20 4: 10 5: 0 -24.828 dB 50 1: -25.098 dB 1.0 GHz -27.749 dB 1.5 GHz -29.57 dB 2.0 GHz -29.588 dB 2.5 GHz -27.86 dB 3.0 GHz 40 2: -27.928 dB 30 3: -28.894 dB 20 4: -28.293 dB 10 5: -26.879 dB -10 -20 1 -30 2 -40 -50 0.5 1.1 3 1.7 4 2.3 5 2.9 Input Return Loss RLin (dB) Insertion Loss LINS (dB) 2.5 INPUT-OUTPUT2 INSERTION LOSS vs. FREQUENCY 1.0 GHz 1.5 GHz 2.0 GHz 2.5 GHz 3.0 GHz 0 -10 -20 1 -30 2 3 -40 3.5 -50 0.5 1.1 1.7 4 2.3 5 2.9 3.5 Frequency f (GHz) Frequency f (GHz) Remark The graphs indicate nominal characteristics. Data Sheet PG10578EJ02V0DS 7 PG2158T5K INPUT-OUTPUT2 OUTPUT RETURN LOSS vs. FREQUENCY INPUT-OUTPUT1 OUTPUT RETURN LOSS vs. FREQUENCY 2: 30 3: 20 4: 10 5: 0 -24.907 dB 50 1: -25.825 dB 1.0 GHz -27.235 dB 1.5 GHz -27.784 dB 2.0 GHz -26.52 dB 2.5 GHz -24.38 dB 3.0 GHz 40 2: -28.812 dB 30 3: -28.916 dB 20 4: -26.585 dB -10 1 -30 2 -40 -50 0.5 1.1 1.7 5 4 3 2.9 2.3 +35 +25 +10 +5 +8 +12 -30 -40 O NT Output Power Pout (dBm) f = 2.0 GHz +30 +15 -20 +16 +20 +24 +28 +32 +36 Input Power Pin (dBm) DI SC Remark The graphs indicate nominal characteristics. 8 2.0 GHz 2.5 GHz 5: Data Sheet PG10578EJ02V0DS -23.762 dB 3.0 GHz 1 2 1.1 4 3 1.7 2.3 Frequency f (GHz) OUTPUT POWER vs. INPUT POWER +20 -10 -50 0.5 3.5 Frequency f (GHz) 0 1.5 GHz IN U -20 10 1.0 GHz ED 1: 40 Output Return Loss RLout (dB) Output Return Loss RLout (dB) 50 5 2.9 3.5 PG2158T5K PACKAGE DIMENSIONS 6-PIN PLASTIC TSSON (UNIT: mm) ED (Top View) O NT 1.00.1 IN U 1.00.1 (Bottom View) 0.15+0.07 -0.05 0.45 0.1 0.350.06 1.00.1 DI SC 0.350.06 0.15+0.07 -0.05 1.00.1 0.130.07 0.1750.075 0.37+0.03 -0.05 0.230.07 Data Sheet PG10578EJ02V0DS 9 PG2158T5K RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Wave Soldering Condition Symbol Peak temperature (package surface temperature) : 260C or below Time at peak temperature : 10 seconds or less IR260 ED Infrared Reflow Soldering Conditions Time at temperature of 220C or higher : 60 seconds or less Preheating time at 120 to 180C : 12030 seconds Maximum number of reflow processes : 3 times Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below Peak temperature (molten solder temperature) : 260C or below Time at peak temperature : 10 seconds or less WS260 Partial Heating IN U Preheating temperature (package surface temperature) : 120C or below Maximum number of flow processes : 1 time Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below Peak temperature (terminal temperature) : 350C or below Soldering time (per side of device) : 3 seconds or less Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below DI SC O NT Caution Do not use different soldering methods together (except for partial heating). 10 Data Sheet PG10578EJ02V0DS HS350 D 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 UE Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. IN CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Lead (Pb) Mercury < 1000 PPM Concentration contained in CEL devices -A Not Detected < 1000 PPM Not Detected < 100 PPM Not Detected SC O Cadmium Concentration Limit per RoHS (values are not yet fixed) NT Restricted Substance per RoHS Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. DI Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.