NPN-Si-Fototransistor mit V Charakteristik Silicon NPN Phototransistor with V Characteristics Lead (Pb) Free Product - RoHS Compliant SFH 3710 Wesentliche Merkmale Features * Sehr kleines SMT Gehause * Angepat an die Augenempfindlichkeit (V) * Very small SMT package * Adapted to human eye sensitivity (V) Anwendungen Applications * * * * * * * * Umgebungslicht-Detektor Beleuchtungsmesser Dimmungssensor fur Hintergrundbeleuchtung Messen/Steuern/Regeln" Ambient light detector Exposure meter for daylight and artificial light Sensor for Backlight-Dimming For control and drive circuits t Typ Type Bestellnummer Ordering Code Fotostrom , Ee = 10 W/cm, = 560 nm, VCE = 5 V Photocurrent Ipce (A) SFH 3710 Q65110A3107 2.5...12.5 SFH 3710-2/3 Q65110A3512 2.5...8.0 SFH 3710-3/4 Q65110A3511 4.0...12.5 Einzelgruppen auf Anfrage / single bins on request 2007-11-14 1 SFH 3710 Grenzwerte (TA = 25 C) Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebs- und Lagertemperatur Operating and storage temperature range Top; Tstg - 40 ...+ 85 C Kollektor-Emitterspannung Collector-emitter voltage VCE 5.5 V Kollektorstrom Collector current IC 20 mA Emitter-Kollektorspannung Emitter-collector voltage VEC 0.5 V Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Wellenlange der max. Fotoempfindlichkeit Wavelength of max. sensitivity Smax 570 nm Spektraler Bereich der Fotoempfindlichkeit S = 10% von Smax Spectral range of sensitivity S = 10% of Smax 350 ... 950 nm Bestrahlungsempfindliche Flache Radiant sensitive area A 0.29 mm2 Abmessung der Chipflache Dimensions of chip area Lx B Lx W 0.75 x 0.75 mm x mm Halbwinkel Half angle 60 Grad. deg. Kapazitat, VCE = 0 V, f = 1 MHz, E = 0 Capacitance CCE 4 pF Dunkelstrom Dark current VR = 5 V ICEO 3 (< 50) nA TK TK550 nm 0.9 0.78 %/K %/K Kennwerte (TA = 25 C) Characteristics Temperturkoeffizient Temperature Coefficient Normlicht A / Standard Light A = 550 nm 2007-11-14 2 SFH 3710 Kennwerte (TA = 25 C) Characteristics Bezeichnung Parameter Symbol Symbol Wert Value -2 Fotostrom Photocurrent Ee = 10 W/cm, = 560 nm, VCE = 5 V Ev = 1000 lx, Normlicht/Standard light A Kollektor-Emitter-Sattigungsspannung Collector-emitter saturation voltage IC = IPCEmin1) x 0.3, Ee = 10 W/cm, = 560 nm -3 -4 IPCE 2.5...5 220 4...8 350 6.3...12.5 A 570 A VCEsat 100 100 100 1) IPCEmin ist der minimale Fotostrom der jeweiligen Gruppe 1) IPCEmin is the min. photocurrent of the specified group 2007-11-14 Einheit Unit 3 mV SFH 3710 Relative Spectral Sensitivity Srel = f () Photocurrent IPCE = f (EV), VCE = 5 V Photocurrent IPCE = f (EV), VCE = 5 V normalized to 1000lx 100 1E+02 100 90 90 1E+01 80 80 Ipce rel (%) 70 Ipce (mA) Srel / % 1E+00 60 50 40 1E-01 50 30 20 20 1E-03 10 10 0 1E-04 1.E+00 1.E+01 1.E+02 1.E+03 1.E+04 1.E+05 400 500 600 700 800 900 1000 1100 Ev (lx) lambda / nm Collector-Emitter Capacitance CCE = f (VCE) 4.0 pF 3.5 CCE 3.0 2.5 2.0 1.5 1.0 0.5 0.0 1E-03 1E-02 1E-01 1E+00 1E+01 VCE 1E+02 V Directional Characteristics Srel = f () 40 30 20 10 0 OHF01402 1.0 50 0.8 60 0.6 70 0.4 80 0.2 0 90 100 60 40 1E-02 30 70 1.0 2007-11-14 0.8 0.6 0.4 0 20 40 60 80 100 4 120 0 1.E+00 1.E+01 1.E+02 1.E+03 1.E+04 1.E+05 Ev (lx) SFH 3710 Mazeichnung Package Outlines Mae in mm (inch) / Dimensions in mm (inch) Empfohlenes Lotpaddesign Recommended Solderpad Design 1.25 3.2 1 Bauteil positioniert Component location on pad OHFP2578 Mae in mm / Dimensions in mm 2007-11-14 5 SFH 3710 Lotbedingungen Soldering Conditions Reflow Lotprofil fur bleifreies Loten Reflow Soldering Profile for lead free soldering Vorbehandlung nach JEDEC Level 2 Preconditioning acc. to JEDEC Level 2 (nach J-STD-020C) (acc. to J-STD-020C) OHLA0687 300 Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile C 255 C 240 C T 250 C 260 C +0 -5 C 245 C 5 C C 235 C +5 -0 C 217 C 10 s min 200 30 s max Ramp Down 6 K/s (max) 150 100 s max 120 s max 100 Ramp Up 3 K/s (max) 50 25 C 0 0 50 100 150 200 250 s 300 t Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com (c) All Rights Reserved. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2007-11-14 6