SFH3710-3/4-Z - OSRAM Opto Semiconductors

SFH 3710

NPN-Si-Fototransistor mit Vλ Charakteristik

Silicon NPN Phototransistor with Vλ Characteristics

Lead (Pb) Free Product - RoHS Compliant

2007-11-14 1

Wesentliche Merkmale

• Sehr kleines SMT Gehäuse

• Angepaßt an die Augenempfindlichkeit (Vλ)

Anwendungen

• Umgebungslicht-Detektor

• Beleuchtungsmesser

• Dimmungssensor für Hintergrundbeleuchtung

• „Messen/Steuern/Regeln“

Einzelgruppen auf Anfrage / single bins on request

Typ

Type Bestellnummer

Ordering Code Fotostrom , Ee = 10 µW/cm², λ = 560 nm, VCE = 5 V

Photocurrent

Ipce (µA)

SFH 3710 Q65110A3107 2.5…12.5

SFH 3710-2/3 Q65110A3512 2.5…8.0

SFH 3710-3/4 Q65110A3511 4.0…12.5

Features

• Very small SMT package

• Adapted to human eye sensitivity (Vλ)

Applications

• Ambient light detector

• Exposure meter for daylight and artificial light

• Sensor for Backlight-Dimming

• For control and drive circuits

2007-11-14 2

SFH 3710

Grenzwerte (TA = 25 °C)

Maximum Ratings

Bezeichnung

Parameter Symbol

Symbol Wert

Value Einheit

Unit

Betriebs- und Lagertemperatur

Operating and storage temperature range Top; Tstg – 40 … + 85 °C

Kollektor-Emitterspannung

Collector-emitter voltage VCE 5.5 V

Kollektorstrom

Collector cu rr ent IC20 mA

Emitter-Kollektorspannung

Emitter-collector voltage VEC 0.5 V

Kennwerte (TA = 25 °C)

Characteristics

Bezeichnung

Parameter Symbol

Symbol Wert

Value Einheit

Unit

Wellenlänge der max. Fotoempfindlichkeit

Wavelength of max. sensitivity λSmax 570 nm

Spektraler Bereich der Fotoempfindlichkeit

S = 10% von Smax

Spectr al range of sensitivity

S = 10% of Smax

λ350 … 950 nm

Bestrahlungsempfindliche Fläche

Radiant sensitive area A0.29 mm2

Abmessung der Chipfläche

Dimensions of chip area L × B

L × W0.75 × 0.75 mm × mm

Halbwinkel

Half angle ϕ ± 60 Grad.

deg.

Kapazität, VCE = 0 V, f = 1 MHz, E = 0

Capacitance CCE 4pF

Dunkelstrom

Dark current

VR = 5 V

ICEO 3 (< 50) nA

Temperturkoeffizient

Temperature Coefficient

Normlicht A / Standard Light A

λ = 550 nm

TK550 nm

0.9

0.78

%/K

SFH 3710

2007-11-14 3

Kennwerte (TA = 25 °C)

Characteristics

Bezeichnung

Parameter Symbol

Symbol Wert

Value Einheit

Unit

-2 -3 -4

Fotostrom

Photocurrent

Ee = 10 µW/cm², λ = 560 nm, VCE = 5 V

Ev = 1000 lx, Normlicht/Standard light A

IPCE

2.5…5

220

4…8

350

6.3…12.5

570

µA

Kollektor-Emitter-Sättigungsspannung

Collector-emitter saturation voltage

IC = IPCEmin1) × 0.3, Ee = 10 µW/cm²,

λ = 560 nm

1) IPCEmin ist der minimale Fotostrom der jeweiligen Gruppe

1) IPCEmin is the min. photocurrent of th e specified group

VCEsat 100 100 100 mV

SFH 3710

2007-11-14 4

Relative Spectral Sensitivity

Srel = f (λ)

Collector-Emitter Capacitance

CCE = f (VCE)

Directional Characteristics

Srel = f (ϕ)

100

400 500 600 700 800 900 1000 1100

lambda / nm

Srel / %

0.0

0.5

1.0

1.5

2.0

2.5

3.0

3.5

4.0

1E-03 1E-02 1E-01 1E+00 1E+01 1E+02

CCE

OHF01402

40 30 20 10

20 40 60 80 100 1200.40.60.81.0

0.2

0.4

0.6

0.8

1.0

100 0

Photocurrent

IPCE = f (EV), VCE = 5 V

1E-04

1E-03

1E-02

1E-01

1E+00

1E+01

1E+02

1.E+00 1.E+01 1.E+02 1.E+03 1.E+04 1.E+05

Ev (lx)

Ipce (mA)

Photocurrent

IPCE = f (EV), VCE = 5 V

normalized to 1000lx

100

1.E+00 1.E+01 1.E+02 1.E+03 1.E+04 1.E+05

Ev (lx)

Ipce rel (%)

SFH 3710

2007-11-14 5

Maßzeichnung

Package Outlines

Maße in mm (inch) / Dimensions in mm (inch)

Empfohlenes Lötpaddesign

Recommended Solderpad Design

Maße in mm / Dimensions in mm

OHFP2578

3.2

1.25

Component location on pad

Bauteil positioniert

2007-11-14 6

SFH 3710

Lötbedingungen Vorbehandlung nach JEDEC Level 2

Soldering Conditions Preconditioning acc. to JEDEC Level 2

Reflow Lötprofil für bleifreies Löten (nach J-STD-020C)

Reflow Soldering Profile for lead free soldering (acc. to J-STD-020C)

Published by

OSRAM Opto Semiconductors GmbH

Wernerwerkstrasse 2, D-93049 Regensburg

www.osram-os.com

The information describes the type of component and shall not be considered as assu red characteristics.

Terms of delivery and rights to change design reserved. Due to technical requirements components may contain

dangerous substances. For information on the types in que stion please contact our Sales Organization.

Packing

Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.

By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing

material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs

incurred.

Components used in life-support devices or systems must be expressly authorized for such purpose! Critical

components 1 , may only be used in life-support dev ices or systems 2 with the express written approval of OSRAM OS.

1 A critical componen t is a component usedin a life-support device or syste m whose failure can reasonably be expected

to cause the failure of that life-support devic e or system, or to a ffect its safety or e ffectiveness of that device or system.

2 Life support devices or syste ms are intended (a) to be implanted in the human body, o r (b) to support and/or maintain

and sustain human life. If they fail, it is reasonable to assume that the health of the us er may be endangered.

OHLA0687

˚C

120 s max

100

150

200

250

300

Ramp Up

100 s max

50 100 150 200 250 300

Ramp Down

6 K/s (max)

3 K/s (max)

25 ˚C

30 s max

260 ˚C

+0 ˚C

-5 ˚C

245 ˚C

±5 ˚C

240 ˚C

255 ˚C

217 ˚C

Maximum Solder Profile

Recommended Solder Profile

235 ˚C

-0 ˚C

+5 ˚C

Minimum Solder Profile

10 s min