KILOVAC Solid State Relays JPS10 Series High Performance Solid State Relays For AC Loads up to 25A @ 250Vrms Product Facts n n n n n Qualified to MIL-PRF-28750D (Mil Part Numbers M28750/10-001Y and M28750/10-002Y) Optically coupled all solid state relay TTL compatible input Zero voltage turn-on for low EMI Custom power package reactive loads. TTL compatible input circuitry is optically isolated to 1,500Vrms from the AC load circuit. The relay is offered in two versions: the JPS10-1Y with a maximum zero voltage turn-on window of 15 volts (preferred version for resistive loads), and the JPS10-2Y with a maximum window of 40 volts (preferred version for reactive loads). KILOVAC Part Number Military Part Number Zero Crossing Window JPS10-1Y M28750/10-001Y 15 V pk max. JPS10-2Y M28750/10-002Y 10 40 V pk max. Outline Drawing Circuit Diagram Terminal View + DC Control Source 1 _ .245 .025 2 PLS (6.22 .63) .040 .002 DIA. (1.02 .05) 2 3 4 2.41 MAX. (61.2) AC Power LOAD .172 (4.37) - 3 PLS FOR #8 [.164 (4.17)] SCREW CONTRASTING BEAD IS + INPUT TERMINAL .080 .002 DIA. (2.03 .05) COPPER CORED WIRE TERMINAL NUMBERS SHOWN ARE FOR REFERENCE ONLY, AND DO NOT APPEAR ON RELAY. 2 3 4 1.99 (50.5) 2.05 (52.1) .825 (20.96) .505 .025 2 PLS (12.83 .63) TOLERANCE: .010 (.25) UNLESS OTHERWISE NOTED 1 1.57 MAX. (39.9) 1.845 MAX. (46.86) 1.30 MAX. (33.0) PAGE 21 KILOVAC Solid State Relays The JPS10 series solid state relay is designed for AC power switching up to 25 amps at 250Vrms. The circuit employs back-toback photo SCRs with zero voltage turn-on for reliable switching of resistive or KILOVAC Solid State Relays JPS10 Series High Performance Solid State Relays For AC Loads up to 25A @ 250Vrms (Continued) Environmental Characteristics Electrical Specifications (-55C to +105C unless otherwise specified) Ambient Temperature Range -- Operating -- -55C to +110C Storage -- -55C to +125C Vibration Resistance -- 30 G's, 10-3,000 Hz Shock Resistance -- 1,500 G's, 0.5 ms pulse Constant Acceleration Resistance (Y1 axis) -- 5,000 G's Input Input supply voltage range (Vcc) 4 - 32 Vdc Input current (max.) 16mAdc Must turn-on voltage 4Vdc Must turn-off voltage 1Vdc Reverse voltage protection -32Vdc I/O Dielectric strength (min.) 1,500Vrms/60 Hz. Insulation resistance (min.) @ 500Vdc 109 ohms Capacitance (max.) Mechanical Characteristics Weight (max.) -- 6 oz. (170 grams) Materials -- Case -- Aluminum, hot tin dipped Terminals -- Copper cored wire, gold plated 20pF Output Output current rating (max.) 25Arms (Fig. 2, Note 1) Surge current (max.) 80A pk (Fig. 1, Note 2) Continuous load voltage (max.) 250Vrms Transient blocking voltage (max.) 500V pk Frequency range 45 - 440 Hz. Output voltage drop (max.) @ 25A load current 1.5Vrms Off-state leakage current (max.) @ 220Vrms/400 Hz. 10mArms Turn-on time (max.) 1/2 cycle Turn-off time (max.) 1 cycle Off-state dv/dt (min.), with snubber 200V /s (Note 3) Zero voltage turn-on window (max.), JPS10-1Y 15V pk Zero voltage turn-on window (max.), JPS10-2Y 40V pk Waveform distortion (max.) 4Vrms Output chip junction temperature (max.) 125C (Note 4) Thermal resistance (max.), junction to ambient 6.8C/W Thermal resistance (max.), junction to case 1.2C/W Notes 1. Operation at elevated load currents up to 25 amps is dependent on the use of suitable heatsink to maintain case temperature per Fig. 2. 2. Heating of output chips during and after a surge may cause loss of output blocking capability until junction temperature falls below maximum rating. 3. Internal snubber network is provided across output chips. 4. Case temperature measurement point is center of mounting surface. Peak Surge Current, Non-Repetitive (% of Rated Current) Figure 1 - Peak Surge Current vs. Surge Current Duration Output Current (Amps rms) 1000 800 600 400 200 0 10 Figure 2 - Load Current vs. Temperature 100 1000 Surge Current Duration (mSec) 10,000 AEROSPACE, DEFENSE & MARINE /// HIGH PERFORMANCE RELAYS Case Temperature 26 24 22 20 18 Am 16 bie nt T 14 em per 12 atu re ( 10 W/ OH 8 eat Sin 6 k) 4 2 0 -55 -35 -15 05 25 45 65 85 105 125 Temperature (C)