GIB2401 thru GIB2404
Vishay General Semiconductor
Document Number: 88633
Revision: 30-Aug-07
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
www.vishay.com
1
Dual Common-Cathode Ultrafast Plastic Rectifier
FEATURES
Glass passivated chip junction
Ultrafast recovery time
Low switching losses, high efficiency
High forward surge capability
Meets MSL level 1, per J-STD-020,
LF maximum peak of 245 °C
Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
TYPICAL APPLICATIONS
For use in high frequency rectifier of switching mode
power supplies, inverters, freewheeling diodes,
dc-to-dc converters, and other power switching
application.
MECHANICAL DATA
Case: TO-263AB
Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix for consumer grade, meets JESD 201 class
1A whisker test, HE3 suffix for high reliability grade
(AEC Q101 qualified), meets JESD 201 class 2
whisker test
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
PRIMARY CHARACTERISTICS
IF(AV) 16 A
VRRM 50 V to 200 V
IFSM 125 A
trr 35 ns
VF0.895 V
TJ max. 150 °C
TO-263AB
PIN 1
PIN 2
K
HEATSINK
1
2
K
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL GIB2401 GIB2402 GIB2403 GIB2404 UNIT
Maximum repetitive peak reverse voltage VRRM 50 100 150 200 V
Maximum RMS voltage VRMS 35 70 105 140 V
Maximum DC blocking voltage VDC 50 100 150 200 V
Maximum average forward rectified current at TC = 125 °C IF(AV) 16 A
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load per diode IFSM 125 A
Operating junction and storage temperature range TJ, TSTG - 65 to + 150 °C
GIB2401 thru GIB2404
Vishay General Semiconductor
www.vishay.com For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
Document Number: 88633
Revision: 30-Aug-07
2
Note:
(1) Thermal resistance from junction to case per leg mounted on heatsink
Note:
(1) Automotive grade AEC Q101 qualified
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER TEST CONDITIONS SYMBOL GIB2401 GIB2402 GIB2403 GIB2404 UNIT
Maximum instantaneous forward voltage
per diode
IF = 4 A
IF = 8 A
IF = 4 A
IF = 8 A
TJ = 25 °C
TJ = 25 °C
TJ = 100 °C
TJ = 100 °C
VF
0.900
0.975
0.800
0.895
V
Maximum DC reverse current per diode
at rated DC blocking voltage
TC = 25 °C
TC = 100 °C IR
50
150
5.0
500 µA
Maximum reverse recovery time IF = 0.5 A, IR = 1.0 A,
Irr = 0.25 A trr 35 ns
Typical junction capacitance per diode 4 V, 1 MHz CJ 85 pF
THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER SYMBOL GIB2401 GIB2402 GIB2403 GIB2404 UNIT
Typical thermal resistance per diode (1) RθJC 1.2 °C/W
ORDERING INFORMATION (Example)
PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE
TO-263AB GIB2401-E3/45 1.35 45 50/tube Tube
TO-263AB GIB2401-E3/81 1.35 81 900/reel Tape and reel
TO-263AB GIB2401HE3/45 (1) 1.35 45 50/tube Tube
TO-263AB GIB2401HE3/81 (1) 1.35 81 900/reel Tape and reel
Figure 1. Maximum Forward Current Derating Curve
0
0
12
16
20
755025 100 125 150
Average Forward Rectified Current (A)
Case Temperature (°C)
8
4
Resistive or Inductive Load
Infinite Heatsink, T
C
Ambient Air Rating, T
A
Figure 2. Maximum Non-Repetitive Peak Forward Surge Current
Per Diode
0
25
50
75
150
125
100
1 10010
Number of Cycles at 60 Hz
Peak Forward Surge Current (A)
T
C
= 125 °C
8.3 ms Single Half Sine-Wave
GIB2401 thru GIB2404
Vishay General Semiconductor
Document Number: 88633
Revision: 30-Aug-07
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
www.vishay.com
3
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
Figure 3. Typical Instantaneous Forward Characteristics Per Diode
Figure 4. Typical Reverse Leakage Characteristics Per Diode
0.2 0.4 0.6 0.81.0 1.2 1.4 1.6
0.01
0.1
10
1
100
Instantaneous Forward Current (A)
Instantaneous Forward Voltage (V)
TJ = 125 °C TJ = 25 °C
Pulse Width = 300 µs
1 % Duty Cycle
6040200 10080
0.01
0.1
10
1
100
TJ = 100 °C
TJ = 125 °C
TJ = 25 °C
Percent of Rated Peak Reverse Voltage (%)
Instantaneous Reverse Leakage
Current (µA)
Figure 5. Typical Junction Capacitance Per Diode
Reverse Voltage (V)
Junction Capacitance (pF)
0.1 1 10 100
100
1000
10
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
TO-263AB
Mounting Pad Layout
0.670 (17.02)
0.591 (15.00)
0.105 (2.67)
0.095 (2.41)
0.08 (2.032) MIN.
0.15 (3.81) MIN.
0.33 (8.38) MIN.
0.42 (10.66) MIN.
12
K
K
0.140 (3.56)
0.110 (2.79)
0.021 (0.53)
0.014 (0.36)
0.110 (2.79)
0.090 (2.29)
0 to 0.01 (0 to 0.254)
0.055 (1.40)
0.047 (1.19)
0.055 (1.40)
0.045 (1.14)
0.190 (4.83)
0.160 (4.06)
0.205 (5.20)
0.195 (4.95)
0.624 (15.85)
0.591 (15.00)
0.037 (0.940)
0.027 (0.686)
0.105 (2.67)
0.095 (2.41)
0.360 (9.14)
0.320 (8.13)
0.411 (10.45)
0.380 (9.65)
0.245 (6.22)
MIN.
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.