109S089 - Sanyo Denki - Datasheet.Live

482

AC Fan

120×120×25 mm

San Ace 120

Only standard fans (without sensors) have acquired CSA certication.

■General Specications

・ Material ………………………………………… Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1)

・ Expected life …………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C,

rated voltage)

・ Motor structure ……………………………… Shaded coil motor

・ Motor protection function ………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 529.

・ Dielectric strength …………………………… 50/60 Hz, 1500 VAC, for 1 minute (between input terminal and frame)

・ Dielectric strength (with sensor) ……… Between AC input and DC input (Sensor output): 50/60 Hz 1000 VAC 1 minute

Between AC input and G: 50/60 Hz 1500 VAC 1 minute

Between G and DC input (Sensor output): 50/60 Hz 1000 VAC 1 minute

・ Insulation resistance ………………………… 10 MΩ or more with a 500 VDC megger

・ Sound pressure level (SPL) ……………… At 1 m away from the air inlet

・ Operating voltage range ………………… Voltage of each model ±10%

・ Storage temperature ……………………… -30 to +70˚C (Non-condensing)

・ Sensor-Purpose lead wire ………………… Brown Black Sensor Yellow

・ Mass ……………………………………………… 370 g/390 g (with Sensor)

■Specications

Standard

Model no.

Rated voltage

Frequency

Input Current

Locked rotor current

Rated speed Max. airow Max. static pressure SPL

Operating temperature

Expected life

[V] [Hz] [W] [A] [A] [min-1] [

m³/min

] [CFM] [Pa] [inchH²O] [dB (A)] [˚C] [h]

109S085 100

50/60

13.5/12

0.16/0.14 0.19/0.17

2500/2900

1.95/2.3 68.9/81.3 48 /51.9 0.193/0.216

38/41

-30 to +60

25000/60˚C

109S084 115 0.14/0.12 0.16/0.15

109S088 200 0.08/0.07 0.1 /0.09

109S087 230 0.07/0.06 0.08/0.07

109S081 100

9.5/8.5

0.11 0.11/0.1

2200/2350

1.7 /1.8 60.1/63.6 29.4/26.5 0.118/0.106

34/35

109S083 115 0.1 0.1 /0.09

109S082 200 0.07 0.07/0.06

109S089 230 0.06 0.06/0.05

109S086*100 12/10 0.14/0.12 0.15/0.13 1400/1600

1.1 /1.25 38.9/44.2 14.7/18.6 0.059/0.075

24/27

* These are low-speed models.

with Sensor

For sensor specications, please refer to p. 531. Sensor specication differs depending on the fan's speed specication.

For a 5 V sensor power supply (ITEM-20), please append "-20" to the end of model number. E.g. 109S485-20

For a 12 V sensor power supply (ITEM-30), please append "-30" to the end of model number. E.g. 109S485-30

Model no.

Rated voltage

Frequency

Input Current

Locked rotor current

Rated speed Max. airow Max. static pressure SPL

Operating temperature

Expected life

[V] [Hz] [W] [A] [A] [min-1] [

m³/min

] [CFM] [Pa] [inchH²O] [dB (A)] [˚C] [h]

109S485 100

50/60 13.5/12

0.16/0.14 0.19/0.17

2500/2900

1.95/2.3 68.9/81.3 48 /51.9 0.193/0.216 38/41

-10 to +60

25000/60˚C

109S484 115 0.14/0.12 0.16/0.15

109S488 200 0.08/0.07 0.1 /0.09

109S487 230 0.07/0.06 0.08/0.07

109S486*100 12/10 0.14/0.12 0.15/0.13 1400/1600

1.1 /1.25 38.9/44.2 14.7/18.6 0.059/0.075 24/27

* These are low-speed models.

483

(Pa)(inch H2O)

1 2 3

0.30

0.25

0.20

0.15

0.10

0.05

静圧

0 20 40 8060 100 (CFM)

(m3/min)

風量

60 Hz 100 V/115 V/200 V/230 V

50 Hz 100 V/115 V/200 V/230 V

0 21 3

0 20 40 60 80

0.05

0.10

0.15

100

(Pa)(inch H2O)

静圧

風量

(CFM)

(m3/min)

60 Hz 100 V/115 V/200 V/230 V

50 Hz 100 V/115 V/200 V/230 V

(Pa)(inch H2O)

静圧

風量

(CFM)

(m3/min)

0.10

0.06

0.04

0.02

0.08

0.12

0 80604020

60 Hz 100 V

50 Hz 100 V

(Pa)(inch H2O)

1 2 3

0.30

0.25

0.20

0.15

0.10

0.05

静圧

0 20 40 8060 100 (CFM)

(m3/min)

風量

60 Hz 100 V/115 V/200 V/230 V

50 Hz 100 V/115 V/200 V/230 V

(Pa)(inch H2O)

1 2

0.12

0.10

0.08

0.06

0.04

0.02

静圧

0 20 40 8060 100 (CFM)

(m3/min)

風量

60 Hz 100 V

50 Hz 100 V

109S085, 109S084, 109S088, 109S087

109S485, 109S484, 109S488, 109S487

109S081, 109S083, 109S082, 109S089

109S486

109S086

AC Fan 120 mm sq.

■Set Models

Fan, nger guard, plug cord, screws, etc. can be purchased in one package. For details, please refer to p. 574.

Order no. Set items

Fan Voltage Low-speed sensor Plug cord Finger guards Mounting screws

ST1-109S085 109S085 100 V 489-016-L10 109-019E

M3×40 mm (4 screws)

ST1-109S084 109S084 115 V 489-016-L10 109-019E

ST1-109S088 109S088 200 V 489-016-L10 109-019E

ST1-109S087 109S087 230 V 489-016-L10 109-019E

ST1-109S081 109S081 100 V 489-016-L10 109-019E

ST1-109S083 109S083 115 V 489-016-L10 109-019E

ST1-109S082 109S082 200 V 489-016-L10 109-019E

ST1-109S089 109S089 230 V 489-016-L10 109-019E

ST1-109S086 109S086

100 V

489-016-L10 109-019E

ST1-109S485-20 109S485-20 ◯ (5 V) 489-016-L10 109-019E

ST1-109S485-30 109S485-30 ◯ (12 V) 489-016-L10 109-019E

ST1-109S484-20 109S484-20 115 V ◯ (5 V) 489-016-L10 109-019E

ST1-109S484-30 109S484-30 ◯ (12 V) 489-016-L10 109-019E

ST1-109S488-20 109S488-20 200 V ◯ (5 V) 489-016-L10 109-019E

ST1-109S488-30 109S488-30 ◯ (12 V) 489-016-L10 109-019E

ST1-109S487-20 109S487-20 230 V ◯ (5 V) 489-016-L10 109-019E

ST1-109S487-30 109S487-30 ◯ (12 V) 489-016-L10 109-019E

ST1-109S486-20 109S486-20 100 V ◯ (5 V) 489-016-L10 109-019E

ST1-109S486-30 109S486-30 ◯ (12 V) 489-016-L10 109-019E

Static pressure

Airow Airow Airow

Airow Airow

with Sensor

■Airow - Static Pressure Characteristics

Standard

484

119±0.5

104.8±0.5

回転方向風吹出方向

104.8±0.5

119±0.5

M4×0.7深6

アース用タップ

3.5 3.5

25±0.5

26以下

8-ø3.7

取付用穴

119±0.5

104.8±0.3

回転方向

風吹出方向

M4×0.7深6

アース用タップ

3.5 3.5

25.3±0.5

26 以下

1.5

センサ用リード線

長さ300L

AWG28

UL 1007

79 9.5

119±0.5

104.8±0.3

9.5

1.5 8-ø3.7

取付用穴

104.8±0.3

115

104.8±0.3

115

4-ø4

ø117

ø127

Standard

Inlet side, Outlet side

with Sensor

Rotating direction Airow direction

Earth ground tap

Rotating direction Airow direction

Earth ground tap

0.7, 6 mm deep

Sensor-purpose lead wire

Length 300L

26 max.

Mounting hole

When mounting the model with a sensor, please screw-mount through both anges as it has a sensor box.

■Dimensions (unit: mm)

■Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

485

A C

電源

ファン

A C

電源

ファン

AC Fan 120 mm sq.

■Options

Finger guards page: p. 514 Resin nger guards page: p. 520

Model no.: 109-019C, 109-019H, 109-019E, 109-019K Model no.: 109-1000G

Resin lter kits page: p. 521 Plug cord page: pp. 523 to 524

Model no.: 109-1000F13 (13PPI), 109-1000F20 (20PPI),

109-1000F30 (30PPI), 109-1000F40 (40PPI)

Model no.: 489-016-L10, 489-016-L21, 489-047-L10,

489-047-L21

Standard

AC power supply

FAN

■Wiring Diagram

with Sensor

For fan power supply

AC power supply

Sensor circuit

Brown

Yellow

Black

Pull-up resistor

+4.5 to 5.5 V

GND (0 V)

+27. 6

V max.

100 mA max.

Sensor output

Sensor circuit

Brown

Yellow

Black

Pull-up resistor

+9.6 to 14.4 V

GND (0 V)

+27. 6

V max.

200 mA max.

Sensor output

For sensor circuit

5 V (ITEM-20) 12 V (ITEM-30)

GND (Black) should be shared in case that power supply for sensor circuit (Brown) and that for sensor pull-up (Yellow) are separated.

FAN

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Sanyo Denki:

109S084 109S085 109S089 109S087 109S081 109S083 109S082 109S086 109S088