Glass wire-wound for
severe applications
APPLICATIONS - Chemical and pharmaceutical industry
- Foo d industry
- H.V.A.C.
- Power generation plants
- Analytical equipment
- Aerospace industry
-Marine
SPECIAL FEATURES - Small dimensions
- Good temperature stability
- Abrasion resistant
- High lead wire pull strength
- Resistance to harsh environments (acid, oil, solvent, etc.)
DESIGN One or two platinum bands wound on a solid glass core and homogeneously
sealed with externa l tube. The lead wire connection has high pull strength.
NOMINAL VALUE - 100 Ωat 0°C
- Temperature coefficient α= 3850 ppm/K
TOLERANCE CLASS -IEC 751 : class B, A and B/3
- Closer tolerances in restricted temperature range
TEMPERATURE RANGE - From -200°C to +400°C
CONNECTION WIRES - Platinum coated nickel wires
HOUSING ADVICE - May be used in most liquids without protection (water, oil, solvent, acid)
RESISTANCE AND STABILITY - High vibration resistance
- Resistant to external forces and pressure
OPTIONS - Lead wire length
- Extension cable
- Glass shape (diameter, length, bend , etc.)
-Ohmicvalues
Glass Wire-Wound
Resistance Element
Type G0
(-200°C to +400°C)
Temperature Sensor
Attention :All technic al da ta an d rec om m en dat io n s con c ern i n g the pro du ct s and ser vices of our firm are for informa ti on pur po s es on ly. No data given in our technical datasheets guarantee particular properties to any products. They
represent values obtained by experience and are intended as guidelines only. Seller reserves the right to make alterations in illustrations and technical data printed, resulting from further development.
Rev. 03-04
HSTUSA 10/09
1901 Route 130
North Brunswick, NJ 08902
Phone 732-940-4400 Fax 732-940-4445
Email info.hst-us@heraeus.com
www.hst-us.com
Heraeus Sensor Technology USA
Standard Product
Type GO
Type Desi-
gnation Reference Nominal
reference LWLDAL1AL2A
Self-heating
in air
t0,5 t0,9 t0,5 t0,9
( Ohm at 0°C) ( K/mW)
1Pt100 GO 1020 SB0789 100 10 6 2,0 15 - 0,25 0,26 0,14 0,35 7 21
1Pt100 GO 1327 SB0865 100 13 9 2,7 15 - 0,25 0,11 0,40 1,30 13 25
1Pt100 GO 1545 SB0862 100 15 9,5 4,5 15 - 0,25 0,09 0,80 2,40 16 40
1Pt100 GO 2327 SB0870 100 23 16 2,7 15 - 0,25 0,11 0,40 1,30 13 25
1Pt100 GO 3045 SB0873 100 30 21 4,5 15 - 0,25 0,09 0,80 2,40 16 40
2Pt100 GO 4845 SB0765 100 48 35 4,5 10 12 0,25 0,09 0,80 2,40 16 40
1Pt100 GO 1020 SB0794 100 10 6 2,0 15 - 0,25 0,26 0,14 0,35 7 21
1Pt100 GO 1327 SB0866 100 13 9 2,7 15 - 0,25 0,11 0,40 1,30 13 25
1Pt100 GO 1545 SB0863 100 15 9,5 4,5 15 - 0,25 0,09 0,80 2,40 16 40
1Pt100 GO 2327 SB0871 100 23 16 2,7 15 - 0,25 0,11 0,40 1,30 13 25
1Pt100 GO 3045 SB0874 100 30 21 4,5 15 - 0,25 0,09 0,80 2,40 16 40
1Pt100 GO 1020 SB0795 100 10 6 2,0 15 - 0,25 0,26 0,14 0,35 7 21
1Pt100 GO 1327 SB0867 100 13 9 2,7 15 - 0,25 0,11 0,40 1,30 13 25
1Pt100 GO 1545 SB0864 100 15 9,5 4,5 15 - 0,25 0,09 0,80 2,40 16 40
1Pt100 GO 2327 SB0872 100 23 16 2,7 15 - 0,25 0,11 0,40 1,30 13 25
1Pt100 GO 3045 SB0875 100 30 21 4,5 15 - 0,25 0,09 0,80 2,40 16 40
(Dimensions in mm)
Class B
Class A
Class B/3
(s)
Response time
Water Air
v = 0,4 m/s v = 1 m/s
Attention :All technic al da ta an d rec om m en dat io n s con c ern i n g the pro du ct s and ser vices of our firm are for informa ti on pur po s es on ly. No data given in our technical datasheets guarantee particular properties to any products. They represent values obtained by experience and are
intended as guidelines only. Seller reserves theright to make alterations in illustrations and technical data printed, resu lting from further dev el op m ent .
Rev. 03-04
DIMENSIONAL TOLERANCES : L
D
AL
A
(length of body)
(diameterof body)
(connection wire length)
(connection wire diameter)
= ±2 mm
= ±0,2 mm
= ±2 mm
= ±0,02 mm
HSTUSA 10/09
