Detail contact area 1,78 14,75 8,03 38,66 11,66 15,24 Mittellinie Leiterplatte 4,34 B A Centerline of daughter card 4 C PIN 1 37 10 Offset von Fuhrungssteg zu Referenzzapfen 0,15 Offset from guiding bar to reference peg NOTES : Datum Material: LCP GF 30 schwarz Date code (see notes ) Material: LCP GF 30 black Galvanik: min. 1,27 m Unternickelung uber den gesamten PIN - Bereich min. 0,127 m Au im Steckbereich Gold - Flash im Lotbereich Plating: min. 1,27 m Ni entire contact min. 0,127 m Au in contact area Gold - Flash plating on contact tails XXXX_XX ERNI RC X 1.) Fertiglochdurchmesser finished viadiameter (PTH) Package: Tray ( 20 pcs. ) 56,5 Lochbild fur Leiterplatte ( Bestuckungsseite) daughter card layout Board hole pattern ( component mounting side) 1 B12 12,14 10 0,71 2,5 A2 3,12 A1 A12 37 x 1 = 37 2 0 1,49 1,35 14,9 1,91 0,05 40,15 56,5 Layout proposal is in accordance with the PCI Express spezification Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 4,48 A49 2,35 (2x) 8,41 5,59 B2 B1 2 15,24 1,57 across pads 1,4 3 B49 39,15 10 2 1.) 0,7 0,08 37 M 1:1 Tolerances Information: 20,3 16,69 2,54 Ma "A" Ma "B" Ma "C" Dim "A" Dim "B" Dim "C" Scale 5:1 All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. Abgew. PCI Express STV 98pol. RT. Angle PCI Express 98 pins 100101610001 www.ERNI.com f 04.11.2011 Index Date Class PCIEXP I A2